Samsung Television UN60D7050VF User Manual

							▶
English
▶
 
●Change PIN: The Change PIN screen will appear. Choose any 4 digits for your 
PIN and enter it in Enter New PIN. Re-enter the same 4 digits in Confirm New 
PIN. When the Confirm screen disappears, press the Close button. The TV has 
memorized your new PIN.
How to watch a restricted program or movie If the TV is tuned to a restricted program or movie, the Program Rating Lock will 
block it. The screen will go blank and the following message will appear: 
“This channel is blocked by Program Rating Lock. Please enter the PIN to 
unblock.” 
Enter the PIN to unblock the program or movie.
 
NIf you forget the PIN code, press the remote control buttons in the following 
sequence in Standby mode, which resets the PIN to “0-0-0-0”:  
MUTE  → 8 
→ 2 
→ 4 
→ POWER (on).  
						

							▶
English
▶
 
❑
Economical Solutions
 
■
Eco Solution
 
OMENU
m 
→  System 
→ Eco Solution 
→ ENTER
E
 
●Energy Saving (Off / Low / Medium / High / Picture Off): Lets you adjusts 
the brightness of the TV in order to reduce power consumption. If you select 
Picture Off, the screen is turned off, but the sound remains on. Press any 
button except the volume button to turn on the screen.
 
●Eco Sensor (Off / On): To enhance your power savings, the picture settings 
will automatically adapt to the light in the room.
 
NIf you adjust Backlight  for LED TV  / Cell Light  for PDP TV  in the Picture menu, 
Eco Sensor will be set to Off .  
						

							▶
English
▶
Min. Backlight  for LED TV  / Min Cell Light  for PDP TV : When Eco sensor is On, 
you can manually adjust the minimum screen brightness.
 
NIf Eco Sensor is On, the display brightness may change (become slightly 
darker or brighter) depending on the surrounding light intensity. You can 
control the screen’s minimum brightness with the Min. Backlight function.
 
●No Signal Power Off (Off / 15 min. / 30 min. / 60 min.):  To avoid unnecessary 
energy consumption, you can set how long you want the TV to remain on if it’s 
not receiving a signal.
 
NDisabled when an attached PC is in power saving mode.
 
●Auto Power Off (Off / On): The TV will automatically turn off if you don’t press 
a button on the remote or touch a button on TV’s front panel within 4 hours to 
prevent overheating.  
						

							▶
English
▶
 
❑
Picture In Picture (PIP)
 
OMENU
m 
→  System 
→ PIP 
→ ENTER
E
 
■
PIP  t
You can watch a program whose signal has passed through the TV’s tuner and 
video from one external video source simultaneously. For example, if you have a 
cable box connected to the Cable In jack, you can use PIP to watch programs 
from the cable box and a movie from a Blu-ray player attached to the HDMI In 
jack.  
						

							▶
English
▶
 
NNOTE
 
●If you have set Double (
à, 
Π) mode in PIP (Picture-in-Picture), you 
cannot adjust the Picture Size.
 
●For PIP sound, refer to the Sound Select instructions.
 
●If you turn the TV off while watching in the PIP mode, the PIP function is 
reset to off. When you turn your TV on, you must turn PIP on again to watch 
in the PIP mode.
 
●You may notice that the picture in the PIP screen becomes slightly unnatural 
when you use the main screen to view a game or karaoke.
 
●While Smart Hub or Program Rating Lock is on, you cannot use PIP.
 
●PIP is not supported in 3D mode.  
						

							▶
English
▶
 
●PIP Settings
The picture from the external video source will be in the main screen and the 
picture from the TV’s tuner will be in the PIP sub-picture screen.
Main picture Sub picture
Component, HDMI, PC TV  
						

							▶
English
▶
 
●PIP (Off / On): Activate or deactivate the PIP function.
 
●Air/Cable (Air / Cable): Select either Air or Cable as the input source for the 
sub-screen.
 
●Channel: Select the channel for the sub-screen.
 
●Size (
õ / 
ã  / 
à  / 
Π): Select a size for the subpicture.
 
●Position (
ã / 
–  / 
—  / 
œ ): Select a position for the sub-picture.
 
NIn Double (
à, 
Π) mode, you cannot select Position.
 
●Sound Select (Main / Sub): You can choose to listen to the sound from the 
Main picture or the Sub picture.  
						

							▶
English
▶
 
❑
Other Features
 
OMENU
m 
→  System 
→ ENTER
E
 
■
Menu Language
Set the menu language.
1. Select  Menu Language, and then press the ENTER
E button.
2.  Choose a language, and then press the ENTER
E button.
 
NChoose from English, Español, and Français.  
						

							▶
English
▶
 
■
Caption
(On-Screen Text Messages)
 
●Caption (Off / On): You can switch the caption function on or off. If captions 
are not available, they will not be displayed on the screen.
 
NThe Caption feature does not work with devices connected to the TV 
through the Component, HDMI or PC input jacks.
 
●Caption Mode: You can select the desired caption mode.
 
NThe availability of captions depends on the program being broadcast.
Default / CC1~CC4 / Text1~Text4: (analog channels only) The Analog Caption 
function operates in either analog TV channel mode or when a signal is s\
upplied 
from an external device to the TV. (Depending on the broadcasting signal, the 
Analog Caption function may or may not work with digital channels.)  
						

							▶
English
▶
Default / Service1~Service6 / CC1~CC4 / Text1~Text4: (digital channels 
only) The Digital Captions function works with digital channels.
 
NService1~6 may not be available in digital caption mode depending on the 
broadcast.
 
●Digital Caption Options: (digital channels only) Adjusts the each option. When 
done, select Close.
Size: Options include Default, Small, Standard and Large. The default is 
Standard.
Font Style: Options include Default and Styles 0 to 7. The default is Style 0.
Foreground Color: You can change the color of the letters. Options include 
Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. The default 
is White.