Samsung SCX 5530FN User Manual

11.1   
11 Using USB flash memory 
(SCX-5530FN only)
This chapter explains how to use a USB memory device with your 
machine. 
This chapter includes:
• About USB memory
• Plugging in a USB memory device
• Scanning to a USB memory device
• Printing from a USB memory device
• Backing up data
• Managing USB memory
About USB memory
USB memory devices are available with a variety of memory capacities 
to give you more room for storing documents, presentations, downloaded 
music and videos, high resolution...

11.2   
5 Press  OK or Start  when USB appears.
Your machine begins scanning the original, and then asks if you 
want to scan another page.
6 Press  OK when  Ye s appears to scan more pages. Load an original 
and press  Start.
Otherwise, press the  Scroll buttons to select  No and press  OK.
After scanning is complete, you can remove the USB memory device 
from the machine.
Customizing Scan to USB 
You can specify image size, file format, or color mode for each scanning 
to USB job.
1 Press  Scan/Email...

11.3   
Printing on both sides of paper
By using the  Duplex button on your machine, you can set the machine to 
print documents on both sides of paper. 
1 Press  Duplex .
2 Press the  Scroll buttons until the binding option you want appears.
• Off : Prints in Normal mode.
• 1->2Side Short : Prints pages to be read by flipping like a note 
pad.
• 1->2Side Long : Prints pages to be read like a book.
3 Press  OK to save your selection.
If the mode is enabled, the  Duplex button is backlit.
Backing up...

11.4   
7 Press  OK when  Ye s appears to confirm your selection.
8 Press  Stop/Clear  to return to Standby mode.
Formatting a USB memory device
1Insert the USB memory device into the USB memory port on your 
machine.
2 Press  Scan/Email .
3 Press  OK when  Scan to USB  appears on the bottom line of the 
display. 
4 Press the 
Scroll buttons until  File Manage appears and press  OK.
5 Press the 
Scroll buttons until  Format appears and press  OK.
6 Press  OK when  Ye s appears to confirm your...

12.1   

13.1   
13 Maintenance
This chapter provides information for maintaining your machine and the 
toner cartridge.
This chapter includes:
• Printing reports
• Clearing memory
• Cleaning your machine
• Maintaining the toner cartridge
• Maintenance Parts
• Managing your machine from the website
• Checking the machine’s serial number
Printing reports
Your machine can provide various reports with useful information you will 
need. The following reports are available:
Reports in the colored cells are only...

13.2   
Clearing memory
You can selectively clear information stored in your machine’s memory.
Caution
For SCX-5530FN users, before clearing the memory, make sure 
that all fax jobs have been completed, or you will lose those 
jobs.
1 Press  Menu until System Setup  appears on the bottom line of the 
display and press  OK. 
2 Press the  Scroll buttons until  Clear Setting  appears and press  OK.
3 Press the  Scroll buttons until the item you want to clear appears.
The options in the colored cells are...

13.3   
3 With a dry lint-free cloth, wipe away any dust and spilled toner from 
the toner cartridge area and the toner cartridge cavity.
Caution
While cleaning the inside of the machine, be careful not to touch 
the transfer roller, located underneath the toner cartridge. Oil 
from your fingers can cause print scan quality problems. 
4 Locate the long strip of glass (LSU) inside the top of the cartridge 
compartment, and gently swab the glass to see if dirt turns the white 
cotton black.
5 Reinsert the...

13.4   
Expected cartridge life
The life of the toner cartridge depends on the amount of toner that print 
jobs require. When printing text at ISO 19752 5% coverage, a new toner 
cartridge lasts an average of either 8,000 or 4,000 pages. (The original 
toner cartridge supplied with the machine lasts an average of 4,000 
pages.) The actual number may also be different depending on the print 
density of the pages you print on, and the number of pages may be 
affected by operating environment, printing...

13.5   
5 Close the front cover. Make sure that the cover is securely closed.
Replacing the toner cartridge
When the toner cartridge is completely empty:
•Toner Empty  appears on the display. 
•The  Status  LED blinks red. 
• The machine stops printing. For the SCX-5530FN, incoming faxes are  saved in memory. 
At this stage, the toner cartridge needs to be replaced. For order 
information for toner cartridges, see page 12.1.
Note
You can set the machine to disregard the  Toner Empty 
message and to...