Samsung SCX 5530FN User Manual

5.4   
Media sizes supported in each mode
Guidelines for selecting and storing print media
When selecting or loading paper, envelopes, or other print materials, 
keep these guidelines in mind:
• Always use print media that conform with the specifications listed on 
page 5.3.
• Attempting to print on damp, curled, wrinkled, or torn paper can cause  paper jams and poor print quality.
• For the best print quality, use only high quality copier grade paper  specifically recommended for use in laser printers....

5.5   
Transparencies • To avoid damaging the machine, use only 
transparencies designed for use in laser printers.
• Transparencies used in the machine must be  able to withstand 180 °C, the machine’s fusing 
temperature.
• Place them on a flat surface after removing them  from the machine.
• Do not leave them in the paper tray for long  periods of time. Dust and dirt may accumulate 
on them, resulting in spotty printing.
• To avoid smudging caused by fingerprints,  handle them carefully.
• To avoid...

5.6   
Loading paper in the tray 1 or optional tray 2
1 Pull open the paper tray and load paper.
You can load letterhead with the design side face down. The top 
edge of the sheet with the logo should be placed at the front of the 
tray.
2 After loading paper, set the paper type and size for the multi-
purpose tray. See page 5.8 for copying and faxing or the  Software 
Section  for PC-printing.
Changing the size of the paper in the paper tray
To load longer sizes of paper, such as Legal-sized paper, you...

5.7   
In the multi-purpose tray
The multi-purpose tray can hold special sizes and types of print material, 
such as transparencies, postcards, note cards, and envelopes. It is useful 
for single page printing on letterhead or colored paper. 
To load paper in the multi-purpose tray:
1 Open the multi-purpose tray and unfold the multi-purpose tray 
extension, as shown. 
2 If you are using paper, flex or fan the edge of the paper stack to 
separate the pages before loading.
For transparencies, hold them by...

5.8   
Tips on using the multi-purpose tray
• Load only one size of print media at a time in the multi-purpose tray.
• To prevent paper jams, do not add paper when there is still paper in 
the multi-purpose tray. This also applies to other types of print media.
• Print media should be loaded face up with the top edge going into the  multi-purpose tray first and be placed in the center of the tray.
• Always load only the print media specified in page 5.2 to avoid paper  jams and print quality problems.
•...

5.9   
Printing to the rear cover
Using the rear cover, paper comes out of the machine  face up.
Printing from the multi-purpose tray to the rear cover provides a straight 
paper path. Using the rear cover might improve the output quality with 
special print media.
To use the rear cover, open it by pulling down. 
Caution
The fuser area inside the rear cover of your machine becomes 
very hot when in use. Take care when you access this area.
Downloaded From ManualsPrinter.com Manuals 

6.1   
6 Copying
This chapter gives you step-by-step instructions for copying documents.
This chapter includes:
• Selecting the paper tray
• Copying
• Changing the settings for each copy
• Changing the default copy settings
• Using special copy features
• Copying on both sides of paper (SCX-5530FN only)
• Setting copy timeout
Selecting the paper tray
After loading the print media for copy output, you must select the paper 
tray you will use for copy jobs.
1 Press  Menu until System Setup  appears on the...

6.2   
Reduced or enlarged copy
By using the  Reduce/Enlarge  button, you can reduce or enlarge the size 
of a copied image from 25% to 400% when you copy original documents 
from the scanner glass, or from 25% to 100% from the ADF.
To select from the predefined copy sizes:
1 Press  Reduce/Enlarge . 
2 Press  Reduce/Enlarge  or the Scroll buttons until the size setting 
you want appears and press  OK.
To scale the copy by directly entering the scale rate:
1 Press  Reduce/Enlarge . 
2 Press...

6.3   
ID card copying
Your machine can print 2-sided originals on one sheet 
of A4-, Letter-, Legal-, Folio-, Executive-, B5-, A5-, or 
A6-sized paper. 
When you copy using this feature, the machine prints 
one side of the original on the upper half of the paper 
and the other side on the lower half without reducing 
the size of the original. This feature is helpful for 
copying a small-sized item, such as a name card. 
This copy feature is available only when you place 
originals on the scanner...

6.4   
Clone copying
Erasing background images
You can set the machine to print an image without its background. This 
copy feature removes the background color and can be helpful when 
copying an original containing color in the background, such as a 
newspaper or a catalog.
1 Press  Copy.
2 Load originals face up into the ADF, or place a single original face 
down on the scanner glass.
For details about loading an original, see page 5.1.
3 Press  Menu until Copy Feature  appears on the bottom line of...