Samsung LN-T4661F Lcd Tv Owners Guide

							
English - 
Setting the Channel lists
You can add or delete a channel so only channels you want are displayed.
all
added
favorite
default list mode : all    
►    
Channel list
move    Enter return
tV
CH
Channel list /  all
move                    Enter                    page                    return
dtV 
air -
air
air4
air 5
air 6
air 
dtV  air -
air  air 
air 0
dtV 
air 0-
dtV  air 0-
dtV  air 0-
dtV  air 0-
dtV  air 0-
dtV  air 0- dtV 
air 0-
dtV  air 0-
dtV  air 0-
air 
dtV  air -
dtV  air -
dtV  air -
dtV  air -4
list modedelete  all
air 5
 / 
Watch
add
delete
favorite
CH
Channel list / all
move                    Enter                    page                     return
dtV 
air -
air
air4
air 5
air 6
air 
dtV  air -
air  air 
air 0
dtV 
air 0-
dtV  air 0-
dtV  air 0-
dtV  air 0-
dtV  air 0-
dtV  air 0- dtV 
air 0-
dtV  air 0-
dtV  air 0-
air 
dtV  air -
dtV  air -
dtV  air -
dtV  air -4
list modedelete  all
air 5
 / add all
CH
Channel list /  all
move                    Enter                    page                   return
dtV 
air -
air
air4
air 5
air 6
air 
dtV  air -
air  air 
air 0
dtV 
air 0-
dtV  air 0-
dtV  air 0-
dtV  air 0-
dtV  air 0-
dtV  air 0- dtV 
air 0-
dtV  air 0-
dtV  air 0-
air 
dtV  air -
dtV  air -
dtV  air -
dtV  air -4
list modedelete  all
air 5
 / 
Channel list / all
move                    Enter                                            \
      return
dtV 
air -
air
air4
air 5
air 6
air 
dtV  air -
air  air 
air 0
dtV 
air 0-
dtV  air 0-
dtV  air 0-
dtV  air 0-
dtV  air 0-
dtV  air 0- dtV 
air 0-
dtV  air 0-
dtV  air 0-
air 
dtV  air -
dtV  air -
dtV  air -
dtV  air -4
air 5
 / 
Watch
add
delete
favorite
list mode
delete  alladd all
1.	Press the  mEnu button to display the menu. 
    Press the ▲ or ▼ buttons to select "Channel", then press the  EntEr
 button. 
2.	Press the ▲ or ▼ buttons to select "Channel List", then press the     EntEr button.
3.	Press the  Ent Er button to select “All”.
4.	Press the ▲ or ▼ buttons to select a channel to delete, then press the      Ent Er button.
    Press the ▲ or ▼ buttons to select “Delete”, then press the  Ent Er
 button to 
    delete the channel.
    The       mark will disappear.
 
5.	Press the ▲ or ▼ buttons to select a channel to add,then press the     EntEr button.
    Press the ▲ or ▼ buttons to select “Add”, then press the  EntEr
 button to 
    add the channel.
    The     mark will appear and the channel will be added.
    Press the  ExIt
 button to exit.
   All selected channels will be shown on “Added menu”.
• p.modE (red) button:  Press repeatedly to select “All”, “Added”, or   
        “Favorite”. 
•  S.modE (Green) button: Press to add all channels deleted. 
•  StIll  (yellow) button: Press to delete all channels memorized.
antenna  : air  ►
auto program     ►
Clear Scrambled Channel ►
Channel list     ►
name     ►
fine t une     ►
Signal Strength     ►
lna  : on ►
Channel
move   Enter return
tV

BN68-01178A-Eng.indd   392007-02-15   �� 8:57:55 
						

							
English - 40
to Set-up  your favorite Channels
1.	Press the  mEnu button to display the menu. 
    Press the ▲ or ▼ buttons to select "Channel", then press the  EntEr
 button. 
2.	Press the ▲ or ▼ buttons to select "Channel List", then press the     EntEr button
.
3.	Press the ▲ or ▼ buttons to select “Added”, then press the  Ent Er button.
4.	 Press the ▲ or ▼ buttons to select your favorite channels to watch among the   
    labeled channels. Then press the  Ent Er  button.
    Press the ▲ or ▼ buttons to select “Favorite”, then press the  Ent Er
 button.
    The "    " symbol will be highlighted and the channel will be set as a Favorite.
 
    To cancel your Favorite channel selection, press the  Ent Er button until the 
    "    " symbol is no longer highlighted.
    Press the  ExIt
 button to exit.
   Only memorized channels can be set as favorite channels.    All favorite channels will be shown in the “Favorite” menu.
You can set channels you watch frequently as favorites.
all
added
favorite
default list mode  : all    
►    
Channel list
move    Enter return
tV
CH
Channel list /  all
move                    Enter                      page                   return
dtV 
air -
air
air4
air 5
air 6
air 
dtV  air -
air  air 
air 0
dtV 
air 0-
dtV  air 0-
dtV  air 0-
dtV  air 0-
dtV  air 0-
dtV  air 0- dtV 
air 0-
dtV  air 0-
dtV  air 0-
air 
dtV  air -
dtV  air -
dtV  air -
dtV  air -4
list modedelete  all
air 5
 / 
Channel list / added
dtV air -
air
air4
air 5
air 6
air 
dtV  air -
air  air 
air 0
dtV 
air 0-
dtV  air 0-
dtV  air 0-
dtV  air 0-
dtV  air 0-
dtV  air 0- dtV 
air 0-
dtV  air 0-
dtV  air 0-
air 
dtV  air -
dtV  air -
dtV  air -
dtV  air -4
list mode
delete  all
air 5
 / 
Watch
add
delete
favorite
antenna : air  ►
auto program     ►
Clear Scrambled Channel ►
Channel list     ►
name     ►
fine t une     ►
Signal Strength     ►
lna  : on ►
Channel
move   Enter return
tV
move                    Enter                                            \
      return

BN68-01178A-Eng.indd   402007-02-15   �� 8:57:57 
						

							
English - 4
using the Channel lists
1.	Press the mEnu button to display the menu. 
    Press the ▲ or ▼ buttons to select "Channel", then press the  EntEr
 button. 
2.	Press the ▲ or ▼ buttons to select "Channel List", then press the     EntEr button.
3.	Press the ▲ or ▼ buttons to select “Default List Mode” (the CH.List you want to   
    appear when you press CH.LIST) then press the  Ent Er button. 
    Press the ▲ or ▼ buttons to select “All”, “Added”, or “Favorite” then press the   
   Ent Er button.
   The CH.List you have chosen will now be set. 
   Press the  ExIt button to exit.
 Alternately, press the  Ch lISt button on the remote control to bring up the Channel Lists.
Displays the channel list automatically when you press  Ch lISt button on the remote. (Choose All, Added, or Favorite)
Viewing the Channel lists
1.	Press the mEnu button to display the menu. 
    Press the ▲ or ▼ buttons to select "Channel", then press the  EntEr
 button. 
2.	Press the ▲ or ▼ buttons to select "Channel List", then press the     EntEr button.
3.	Press the ▲ or ▼ buttons to select “All”, “Added” or “Favorite”, then press the    Ent Er button.
4.	Press the ▲ or ▼ buttons to select “Channel”, then press the  Ent Er button. 
    To toggle between your all channels, add channels, or favorite channels,  
    use the red (P.Mode) button on the remote control.
• p.modE (red) button:  Press repeatedly to select “All”, “Added”, or   
        “Favorite”
You can display a list of all channels, added channels or your favorite c\
hannels.
all
added
favorite
default list mode : all    
►    
Channel list
move    Enter return
tV
all
added
favorite
all
added
favorite
default list mode  : all    
►    
Channel list
move    Enter return
tV
CH
Channel list /  all
move                    Enter                    page                     return
dtV 
air -
air
air4
air 5
air 6
air 
dtV  air -
air  air 
air 0
dtV 
air 0-
dtV  air 0-
dtV  air 0-
dtV  air 0-
dtV  air 0-
dtV  air 0- dtV 
air 0-
dtV  air 0-
dtV  air 0-
air 
dtV  air -
dtV  air -
dtV  air -
dtV  air -4
list modedelete  all
air 5
 / 
antenna : air  ►
auto program     ►
Clear Scrambled Channel ►
Channel list     ►
name     ►
fine t une     ►
Signal Strength     ►
lna  : on ►
Channel
move   Enter return
tV
antenna  : air  ►
auto program     ►
Clear Scrambled Channel ►
Channel list     ►
name     ►
fine t une     ►
Signal Strength     ►
lna  : on ►
Channel
move   Enter return
tV

BN68-01178A-Eng.indd   412007-02-15   �� 8:57:59 
						

							
English - 4
labeling Channels
1.	Press the mEnu button to display the menu. 
    Press the ▲ or ▼ buttons to select “Channel”, then press the  EntEr button. 
    Press the ▲ or ▼ buttons to select “Name”, then press the  EntEr button.
2.	Press the ▲ or ▼ buttons to select the channel to be assigned a new name, 
    then press the  EntEr button. 
    Press the ▲ or ▼ buttons to select a letter, a number or a blank (Results in this   
    sequence: A...Z, 0...9, +, -, *, /, blank).
 
    Press the ► button to switch to the next field, which will be selected. 
    Select a second letter or digit by pressing the ▲ or ▼ buttons, as above. 
    Repeat the process to select the last three digits. When you have finished, 
    press the  EntEr button to assign the new name. 
    To erase the assigned new name, select "Clear" by pressing the ◄ or ► button, 
    then press the  EntEr button.
    Press the  ExIt
 button to exit.
   The names of digital broadcasting channels are automatically assigned and   
      thus cannot be assigned by users.
name
move    Enter return
tV
air 
air 
air 4
air 5
air 6ClearClearClearClearClear
name
move   adjust return
tV
air 
air 
air 4
air 5
air 6ClearClearClearClearClear
a▲▼
LNA (Low Noise Amplifier)
1.	Press the mEnu button to display the menu. 
    Press the ▲ or ▼ buttons to select “Channel”, then press the  EntEr button. 
2.	Press the ▲ or ▼ buttons to select “LNA”, then press the EntEr  
    button.
3.	Press the▲ or ▼ buttons to select “On”, then press the  EntEr button.
    Press the  ExIt
 button to exit.
   LNA functions when the antenna is set to Air or Cable. Settings will be stored 
      separately in each channel. (See “Selecting the antenna.” on page 38)
If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal).
Channels can be labeled so that their call letters appear whenever the channel is selected.
antenna  : air  ►
auto program     ►
Clear Scrambled Channel ►
Channel list     ►
name     ►
fine t une     ►
Signal Strength     ►
lna  : on ►
Channel
move   Enter return
tV
antenna  : air  ►
auto program     ►
Clear Scrambled Channel ►
Channel list     ►
name     ►
fine t une     ►
Signal Strength     ►
lna  : on ►
Channel
move   Enter return
tV
antenna  : air  
auto program     
Clear Scrambled Channel
Channel list     
name     
fine t une
     
Signal Strength     
lna  : on 
Channel
move    Enter return
tV
off
on

BN68-01178A-Eng.indd   422007-02-15   �� 8:58:02 
						

							
English - 4
fine tuning  analog Channels
1.	Press the  mEnu button to display the menu. 
    Press the ▲ or ▼ buttons to select "Channel", then press the  EntEr
 button. 
2.	Press the ▲ or ▼ buttons to select "Fine Tune", then press the  EntEr button.
3.	Press the ◄ or ► buttons to adjust the fine tuning. 
    To store the fine tuning setting in the TV’s memory, press the  EntEr
 button.
    If you do not store the fine-tuned channel in memory, adjustments are not saved.
4.	To reset the fine tuning setting, press the ▼ button to select "Reset",  
    then press  the  EntEr
 button.
    Press the  ExIt 
button to exit.     "*" will appear next to the name of fine-tuned channels.
Use fine tuning to manually adjust a particular channel for optimal reception.
Checking the digital-Signal Strength
1.	Press the mEnu button to display the menu. 
    Press the ▲ or ▼ buttons to select “Channel”, then press the  EntEr button. 
2.	Press the ▲ or ▼ buttons to select “Signal Strength”, then press the  EntEr  
    button. 
    If the signal strength meter indicates that the signal is weak, physically adjust your   
    antenna to increase the signal strength.
 
    Continue to adjust the antenna until you find the best position with the strongest   
    signal.
    Press the  ExIt
 button to exit
Unlike analog channels, which can vary in reception quality from “sno\
wy” to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, y ou cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital chan\
nels.
Signal Strength
    Enter return
tV
oK
 adjust  Save return
fine tuneair 4
0
reset
 adjust  Save return
fine tuneair 4
+
reset
 move  Enter return
fine tuneair 4
0
reset
antenna  : air  ►
auto program     ►
Clear Scrambled Channel ►
Channel list     ►
name     ►
fine t une     ►
Signal Strength     ►
lna  : on ►
Channel
move   Enter return
tV
antenna  : air  ►
auto program     ►
Clear Scrambled Channel ►
Channel list     ►
name     ►
fine t une     ►
Signal Strength     ►
lna  : on ►
Channel
move   Enter return
tV
 adjust  Save return
fine tuneair 4 *
+
reset
fine tuned

BN68-01178A-Eng.indd   432007-02-15   �� 8:58:05 
						

							
English - 44
using your tV as a Computer (pC) display
Setting up  your pC Software (Based on Windows xp)
The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different,  
depending upon your particular version of Windows and your particular vi\
deo card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases\
. (If not, contact your computer manufacturer or Samsung Dealer.)
1.	First, click on " Control panel" on the Windows start menu.
2.	When the control panel window appears, click on " appearance and themes" and a   
    display dialog-box will appear.
3.	When the control panel window appears, click on " display" and a display dialog-box    
    will appear.
4.	Navigate to the "Settings" tab on the display dialog-box. 
    The correct size setting (resolution)
    Optimum: 1920 X 1080 pixels
    If a vertical-frequency option exists on your display settings dialog box, 
 
    the correct value is "60" or "60 Hz". Otherwise, just click "OK" and exit the dialog box.
pC display
display modes
If the signal from the system equals the standard signal mode, the screen is adjusted automatically.  If the signal from the system doesn’t equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no video. For the display modes listed below, the screen image has been optimized during manufacturing.
mode resolution horizontal 
frequency (khz)Vertical 
frequency (hz) pixel Clock 
frequency (mhz) Sync polarity 
(h/V)
IBm
720 X 400 640 X 48031.469 31.46970.087 59.94028.322 25.175- / + - / -
VESa
640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1280 x 1024 1920 x 1080
37.861 37.500 35.156 37.879 48.077 46.875 48.363 56.476 60.023 79.976  66.500
72.809 75.000 56.250 60.317 72.188 75.000 60.004 70.069 75.029 75.025 60.000
31.500 31.500 36.000 40.000 50.000 49.500 65.000 75.000 78.750 123.000 138.500
- / - - / - + /+ + /+ + /+ + /+ - / - - / - + /+ + /+ - / +
mode resolution horizontal 
frequency (khz)Vertical 
frequency (hz) pixel Clock 
frequency (mhz) Sync polarity 
(h/V)
IBm
640 X 350 720 X 400 640 X 480
31.469 31.469 31.469
70.086 70.087 59.940
25.175 28.322 25.175
+ /- - / + - / -
VESa
800 x 600 1024 x 768 1280 x 1024 1920 x 1080
37.879 48.364 63.981 66.587
60.317 60.000 60.020 59.934
40.000 65.000 108.000 138.500
+ /+ - / - + /+ + /-
d-Sub Input
hdmI/dVI Input

BN68-01178A-Eng.indd   442007-02-15   �� 8:58:05 
						

							
English - 45
1.	Press the mEnu button to display the menu. 
    Press the ▲ or ▼ buttons to select "Setup", then press the  EntEr
 button. 
    Press the ▲ or ▼ buttons to select "PC", then press the  EntEr
 button.
   Change to the PC mode first.
2.	Press the ▲ or ▼ buttons to select "Auto Adjustment", then press the  Ent Er button.
    Press the  ExIt 
button to exit.
how to auto adjust
Use the Auto Adjust function to have the TV set automatically adjust the video signals the monitor receives.  The function also automatically fine-tunes the settings and adjusts the frequency values and positions.  
 This function does not work in DVI-Digital mode.
Setting up the tV with your pC
1.	Press the  mEnu button to display the menu. 
    Press the ▲ or ▼ buttons to select "Setup", then press the  EntEr
 button. 
    Press the ▲ or ▼ buttons to select "PC", then press the  EntEr
 button.
    Change to the PC mode first.
2.	Press the EntEr button to select "Image Lock".
3.	Press the ▲ or ▼ buttons to select "Coarse" or "Fine", then press the  Ent Er button. 
    Press the ◄ or ► buttons to adjust the screen quality.         Vertical stripes may appear or the picture may be blurry.     
    Press the  EntEr
 button.
    Press the  ExIt 
button to exit.
adjusting the Screen Quality
The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone, then do the frequency adjustments to the utmost and fine tune again(See page 44). After the noise has been reduced,  re-adjust the picture so that it is aligned on the center of the screen.
pCImage lock       ►
position      ►
auto  adjustment       ►
Image reset       ►
tV
 move   Enter return
pCImage lock       ►
position      ►
auto  adjustment       ►
Image reset       ►     
tV
 move   Enter return
auto adjustment in progress. please Wait
Setup▲more
Blue Screen  : off   ►
Melody  : Off   ►
pC 
Home theater PC  : Off   ►
Energy Saving  : Off   ►
hdmI Black level  :normal   
►▼ More  
tV
 move   Enter return
Image lockCoarse     50
fine        0     
tV
 move   Enter return
50▲ Coarse  ▼move    adjust return

BN68-01178A-Eng.indd   452007-02-15   �� 8:58:08 
						

							
English - 46
Changing the Screen position
1.	Press the mEnu button to display the menu. 
    Press the ▲ or ▼ button to select "Setup", then press the  EntEr
 button. 
    Press the ▲ or ▼ button to select "PC", then press the  EntEr
 button.
    Change to the PC mode first.
2.	Press the ▲ or ▼ button to select "Position", then press the  EntEr button.
3.	Press the ▲ or ▼ button to adjust the V-Position. 
    Press the ◄ or ► button to adjust the H-Position. 
    Press the  EntEr
 button.
    Press the  ExIt 
button to exit.
Initializing the Screen  position or Color Settings You can replace all image settings with the factory default values.
1.	Press the mEnu button to display the menu. 
    Press the ▲ or ▼ button to select "Setup", then press the  EntEr
 button. 
    Press the ▲ or ▼ button to select "PC", then press the  EntEr
 button.
    Change to the PC mode first.
2.	Press the ▲ or ▼ button to select "Image Reset", then press the  EntEr button.
    Press the  ExIt 
button to exit.
pCImage lock       ►
position      ►
auto  adjustment       ►
Image reset       ►     
tV
 move   Enter return
tV
 adjust    Enter return
position
▲▲
▲
▲
pCImage lock       ►
position      ►
auto  adjustment       ►
Image reset       ►     
tV
 move   Enter return
Image reset is completed.
1.	Press the mEnu button to display the menu. 
    Press the ▲ or ▼ button to select "Setup", then press the  EntEr button.
2.	Press the ▲ or ▼ button to select “Home Theater PC”, then press the  Ent Er  
    button.
3.	 Press the ▲ or  ▼ button to select “On” or "Off", then press the  EntEr button.
 off: Turns off the settings for screen-related functions in PC input mode.  on: Turns on the settings for screen-related functions in PC input mode to pr\
ovide more      dynamic scenes.
    Press the  ExIt button to exit.
  This function is available only in PC mode.
Setting the home theater pC
This function enables you to view higher quality pictures while in PC Mode.  After setting the Home Theater PC function to On, you can go into the Detailed Settings  menu and make adjustments without affecting settings in the regular TV mode.
Setup▲more
Blue Screen  : off   ►
Melody  : Off   ►
pC 
Home theater PC  : Off   ►
Energy Saving  : Off   ►
hdmI Black level  :normal   
►▼ More  
tV
 move   Enter return
Setup▲more
Blue Screen  : off   
melody  : off
pC 
home theater pC  : off
   
Energy Saving  : off   
hdmI Black level  :normal   
▼ More  
tV
 move   Enter return
off
on

BN68-01178A-Eng.indd   462007-02-15   �� 8:58:10 
						

							
English - 4
Setting the Clock
Setting the clock is necessary in order to use the various timer feature\
s of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.)
option : Setting the Clock manually
1.	Press the mEnu button to display the menu. 
    Press the ▲ or ▼ buttons to select "Setup", then press the  EntEr button. 
    Press the ▲ or ▼ buttons to select "Time", then press the  EntEr button.
2.	Press the EntEr button to select "Clock".
3.	Press the EntEr button to select “Clock Mode”. 
    Press the ▲ or ▼ buttons to select “Manual”, then press the  EntEr button.
4.	Press the ▲ or ▼ buttons to select “Clock Set”, then press the  EntEr button.
5.	Press the ◄ or ► buttons to move to “Month”, “Day”, “Year”, “Hour”, “Minute”, 
    or “am/pm”. Set the date and time you want by pressing the ▲ or ▼ buttons, 
    then press the  EntEr button.
    Press the  ExIt
 button to exit.
    The current time will appear every time you press the  Info button.
    You can set the month, day, year, hour, and minute directly by pressing the 
      number buttons on the remote control.
time Setting
time
Clock      ►
Sleep t imer  : off   ► 
t imer   : Inactivated   ►
t imer   : Inactivated   ►
t imer   : Inactivated   ► 
tV
 move   Enter return
- - / - - / - - - - / - - : - -  - -
ClockClock mode  : manual   ►
Clock Set       ► 
t ime Zone       ►
dSt      ►
tV
 move   Enter return
Clock SetSet Current date adn time.tV
 move   adjust return
month▲▼
dayyear
hour
minuteam/pm
Clock SetSet current data and time.tV
month▲▼
day year
hour
minuteam/pm 00
00am
 move    adjust return
Setupplug & play       ►
language  : English   ►
t ime      ►
Game mode  :  off   ► 
V-Chip      ► Caption      ►
menu t ransparency  :  high ►▼more        
tV
 move   Enter Exit

BN68-01178A-Eng.indd   472007-02-15   �� 8:58:12 
						

							
English - 4
option : Setting the Clock automatically
1.	Press the mEnu button to display the menu. 
    Press the ▲ or ▼ buttons to select "Setup", then press the  EntEr button. 
    Press the ▲ or ▼ buttons to select "Time", then press the  EntEr button.
2.	Press the EntEr button to select "Clock".
3.	Press the EntEr button to select “Clock Mode”. 
    Press the ▲ or ▼ buttons to select “Auto”, then press the  EntEr button.
4.	Press the ▲ or ▼ buttons to select “Time Zone”, then press the  EntEr  
    button.
5.	Press the ▲ or ▼ buttons to highlight the time zone for your local area, 
    then press the  EntEr button.
6.	Press the ▲ or ▼ buttons to select “DST” (Daylight Saving Time), then press   
    the EntEr button.
    Press the 
▲ or ▼ buttons to select “On” or “Off”, then press the  Ent Er button.
    Press the  ExIt
 button to exit.
    Depending on the broadcast station and signal, the auto time may not be   
      set correctly. If this occurs, set the time manually.
    the Antenna or cable must be connected in order to set the time automatically.
time
Clock      ►
Sleep t imer  : off   ► 
t imer   : Inactivated   ►
t imer   : Inactivated   ►
t imer   : Inactivated   ►
tV
 move   Enter return
- - / - - / - - - - / - - : - -  - -
ClockClock mode  : manual   ►
Clock Set       ► 
t ime Zone       
dSt  : off       
tV
 move   Enter return
manual
auto
ClockClock mode  : auto   ►
Clock Set       ► 
t ime Zone       ►
dSt  : off   ►
tV
 move   Enter return
 move  Enter Skip
Select the time zone in which you live.  t
ime Zonenewfoundland
atlantic
EasternCentral
mountain
pacific
alaska
hawaii
ClockClock mode  : auto   ►
Clock Set       ► 
t ime Zone       ►
dSt  : off   ►
tV
 move   Enter return
ClockClock mode  : auto   
Clock Set        
t ime Zone       
dSt  : off       
tV
 move   Enter return
on
off
Setupplug & play       ►
language  : English   ►
t ime      ►
Game mode  :  off   ► 
V-Chip      ► Caption      ►
menu t ransparency  :  high   ►▼more        
tV
 move   Enter return

BN68-01178A-Eng.indd   482007-02-15   �� 8:58:15