Samsung LN-T4661F Lcd Tv Owners Guide

Owner’s 
Instructions
Register your product at www.samsung.com/global/register 
Record your Model and Serial number here for future reference.
 · Model __________    · Serial No. ____________
LN-T4061F 
LN-T4065F
LN-T4661F 
LN-T4665F 
LN-T5265F
TFT-LCD TELEVISION
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care center.
Contacte con SAMSUNG WORLD-WIDE
Si tiene alguna pregunta o comentario referente a nuestros...

 Precautions When Displaying a Still Image  A still image may cause permanent damage to the TV screen • Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention.  
  This image retention is also known as "screen burn".   
  To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. •   Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on...

English - 
Contents
English
GE n E ral Informat I on
List of Features  ..................................................................2Accessories  .......................................................................2Viewing the Control Panel    ................................................3Viewing the Connection Panel    ..........................................4Remote Control  .................................................................5Installing Batteries in the Remote Control...

English - 
accessories
Please make sure the following items are included with your LCD TV.  If any items are missing, contact your dealer.
Remote Control & Batteries (AAA x 2)(BN59-00599A)
Power Cord
(3903-000144)
Cleaning Cloth
(BN63-01798A)
Cover-Bottom
LN-T4061F : BN63-03031A  
LN-T4065F : BN63-03298A 
LN-T4661F  : BN63-03148A 
LN-T4665F / LN-T5265F  : BN63-03308A
Owner’s InstructionsWarranty Card / RegistrationCard / Safety Guide Manual(Not available in all locations)
The items color and shape...

English - 
Viewing the Control Panel 
1
1 23 46
5
2
3
4
567
57
Buttons on the Lower-Right Part of the Panel
The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu.  To use the more advanced features, you must use the remote control.
 The product color and shape may vary depending on the model.
1 SOURCE 
 
Toggles between all the available input sources 
 
(TV, AV1, AV2, S-Video1, S-Video2, Component1,  
 
Component2, PC, HDMI1, HDMI2, HDMI3).  
 
In the...

English - 4
Viewing the Connection panel 
rear panel Jacks
Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players.  For more information on connecting equipment, see pages 6-11.
1	audIo out 
  Connects to the audio input jacks on your Amplifier/ 
  Home theater. 
2 dIGItal  audIo  out (optICal)  
  Connects to a Digital Audio component.
3 pC In 
    Connects to the video and audio output jacks on  your PC.
4 hdmI In  ,, /dVI...

English - 5
remote Control
You can use the remote control up to a distance of about 23 feet from the\
 TV. When using the remote, always point it directly at the TV. You can also use your remote control to operate your VCR, Cable box, DVD \
player, or Set-Top Box. 
This is a special remote control for the visually impaired, and has Braille    
  points on the Power, Channel, STOP, PLAY/PAUSE and Volume buttons. The performance of the remote control may be affected by bright light.
1	poWEr
  Turns the TV...

English - 6
1.	Lift the cover at the back of the remote control upward as shown in the figure.
2.	Install two AAA size batteries.  Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment.
3.	Replace the cover.   Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a   
    long time.  
  The remote control can be used up to about 23 feet from the TV.  
  (Assuming typical TV usage, the batteries...

English - 
After you have made this connection, set the A/B switch to the "A" position for normal viewing. Set the A/B switch to the "B" position to view scrambled channels. (When you set the A/B switch to "B", you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)
Connecting to a Cable Box that descrambles Some Channels
If your cable box descrambles only some channels (such as premium chann\
els), follow the instructions below....

English - 
Connecting a VCr
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 6-7). Skip step 1 if you have not yet connected t\
o an antenna or a cable system. 
1.	Unplug the cable or antenna  
    from the back of the TV.
2.	Connect the cable or antenna 
    to the ANT IN terminal on the 
    back of the VCR.
3.	Connect an RF Cable between   
    the ANT OUT terminal on the     
    VCR and the ANT 1 IN...