Samsung LN-T4661F Lcd Tv Owners Guide

English - 
Connecting a dVd player or Set-top/Cable Box
The rear panel jacks on your TV make it easy to connect a DVD player or Set-Top/Cable box to your TV.
1.	Connect a Component  
    Cable between the  
    COMPONENT IN(1 or 2)  
    [Y, PB, PR] jacks on the TV  
    and the COMPONENT  
    [Y, PB, PR]  jacks on the  
    DVD player or Set-Top/Cable   
    Box.
2.	Connect Audio Cables 
    between the COMPONENT 
    IN(1 or 2) [R-AUDIO-L]  
    jacks on the TV and the     
    AUDIO OUT jacks...

English - 0
Connecting a dVd player or Set-top/Cable Box via hdmI
This connection can only be made if there is an HDMI Output connector on\
 the external device.
dVd player, Set-top/Cable Box rear panel
tV rear panel
hdmI Cable (not supplied)
What is HDMI? 
•  HDMI(High-Definition Multimedia Interface), is an interface that  
  enables the transmission of digital audio and video signals using a single cable  
•  The difference between HDMI and DVI is that the HDMI device is smaller in size and...

Connecting an Amplifier/DVD Home Theater
1.	Connect Audio Cables  
   
between the AUDIO OUT  
   
[R-AUDIO-L] on the TV  
   
and AUDIO IN [R-AUDIO- 
   
L] on the Amplifier/DVD  
   
Home Theater.
   
When an audio amplifier is 
 
   
connected to the "AUDIO  
   
OUT [L-AUDIO-R]"  
   
terminals: Decrease the  
   
volume of the TV, and adjust  
   
the volume level with the 
   
Amplifier’s volume control.
Amplifier/DVD Home Theater
TV Rear Panel
Audio Cable (Not supplied)
Each Amplifier/DVD...

English - 
plug & play feature
When the TV is initially powered on, basic settings proceed automatically and subsequently:
1.	Press the poWEr button on the remote control. 
    The message “Menu language, Shop Mode, Channels and Time will be set.” is  
    displayed.
    Press the  EntEr
 button, then “Select the language of the OSD” menu  
    is automatically displayed.
2. Press the ▲ or ▼ buttons to select language, then press the  EntEr button. 
    The message “Select Home Mode when...

English - 
7.	Press the ▲ or ▼ buttons to select “No” or “Yes”, then press the EntEr button. 
    The message “Select the time zone in which you live.” is displayed.
8.	Press the ▲ or ▼ buttons to highlight the time zone for your local area 
    Press the  EntEr button. If you have received a digital signal, the time will be set 
    automatically. 
    If not, see page 48 to set the clock.
9.	The message “Enjoy your watching.” is displayed. 
    When you have finished, press the  EntEr...

English - 4
adjusting the Volume
1.	Press the Vol or Vol buttons to decrease or increase the volume. 
using mute
At any time, you can cut off the sound using the  mutE button.
1.	Press mutE button and the sound cuts off.  
    The word "              " will appear in the lower-left corner of the screen.
2.	To turn mute off, press the  mutE button again, or simply press the     Vol or Vol buttons.
Viewing the display
1.	Press the  Info button on the remote control.
    The TV will display...

English - 5
Viewing the menus
1.	With the power on, press the mEnu button. 
    The main menu appears on the screen. The menu’ s left side has five icons: 
    Picture, Sound, Channel, Setup, Input.
2.	Use the ▲ or ▼ buttons to select one of the five icons.  
    Then press the  EntEr
 button to access the icon’s sub-menu.
3.	Press the ExIt button to exit.
 The on-screen menus disappear from the screen after about one minute.
InputSource list  : tV   ►
Edit name       ►
WiSElInK       ►
anynet+...

English - 6
Storing Channels in memory (automatic method)
1.	Press the mEnu button to display the menu. 
    Press the ▲ or ▼ buttons to select “Channel”, then press the  EntEr button. 
2.	Press the ▲ or ▼ buttons to select "Auto Program", then press the  Ent Er button.
3.	Press the ▲ or ▼ buttons to select the antenna connection, then press the      EntEr button.
   Air: “Air” antenna signal. / Cable: “Cable” antenna signal. /  
      Air+Cable: “Air” and “Cable” antenna signals.
4.	When...

English - 
after the television has been set up properly, your remote control can operate in five 
different modes: tV, dVd, Cable, Set-t op Box, VCr. pressing the corresponding button 
on the remote control allows you to switch between these modes, and control  whichever piece of equipment you choose.
The remote control might not be compatible with all DVD Players, VCRs, Cable boxes, and Set-Top Boxes.
Setting  up the remote to  operate your VCr
.     Turn off your VCR.   
.   Press...

English - 
Setting up the remote to  operate your  dVd
.     Turn off your DVD.
.   Press the  dVd
 button on your TV’s remote control.
.   Press the  SEt
 button on your TV’s remote control.
4.    Using the number buttons on your remote control, enter three digits of the DVD code listed on page 20~21 of this manual for your brand of DVD.  Make sure you enter three digits of the code, even if the first digit is a “0”. (If there is more than one code listed, try the first one.)...