Samsung Idcs 100 Digital Communications System General Description Manual

In addition any trunk or station can be programmed to ring a keyset with a pre-
defined ring tone (1–8) or a single line port with a predefined cadence (1–5) selec-
tion. This provides for easy identification of special lines or extensions that ring
your phone.
DOOR LOCK RELEASE (PROGRAMMABLE)
After answering a call from the door phone, users can dial a code to activate a
contact closure. This can be used to operate a customer-provided electric door
lock release mechanism. The contact closure timer is...

This feature does not work from single line sets.
TRUNK MONITOR or SERVICE OBSERVING
This feature allows the user who barged-in to retain the trunk call after the original
station has hung up.
WARNING: BARGE-IN WITHOUT TONE MAY VIOLATE STATE OR FEDERAL LAWS
CONCERNING THE RIGHT TO PRIVACY. SAMSUNG TELECOMMUNICATIONS
AMERICA IS IN NO WAY RESPONSIBLE FOR THE POSSIBLE MISUSE OF THIS
FEATURE.
EXTERNAL MUSIC INTERFACES
The system provides an interface for connecting a customer-provided external
music source...

HOT LINE
Stations can be programmed to call a pre-defined station or station group when-
ever that station goes off-hook. A hot line delay timer of 0–250 seconds can be
programmed to allow sufficient time to make a different call. This timer is program-
mable on a per station basis.
IN GROUP/OUT OF GROUP
Individuals assigned to a station hunt group may temporarily remove their tele-
phones from the group by pressing the In/Out of Group button providing that there
is someone still in the group. There is a...

BASIC RATE INTERFACE (BRI)
The iDCS 100 BRI card supports trunk or station level Basic Rate Interface services
(BRI). Trunk or station BRI use is software programmable. BRI allows simultaneous
data calls, called party and calling number identification, high speed call setup
and disconnect are among the benefits of ISDN calling. The 2B+D configuration of
ISDN allows call information to be delivered via the data channel (the “D” of 2B+D)
thus leaving the bearer channels (the “B” of 2B+D) available for...

the Smart Media card may be used to store the system database. The PCMMC
computer program may be used to produce a backup copy of the customer data.
MESSAGE WAITING INDICATIONS
When calling a station and receiving a busy signal or the no answer condition, the
caller can leave an indication that a message is waiting. The message button will
flash red at the messaged keyset. A single line phone will receive a distinctive
message waiting dial tone. Five message waiting indications can be left at any...

NETWORKING (Enhanced Version Software/MEM4)
The iDCS 100 networking feature package (Enhanced Version Software Only) al-
lows the iDCS 100 system to be connected to an iDCS 100 or to an iDCS 100 via
some basic feature transparency. The physical connection between the systems is
via a proprietary PRI connection and is based on the Q-SIG specification. The fol-
lowing features are supported between two networked systems. Note that enhanced
version software is only available with a MEM4 card.
Call...

Call Intrusion (Barge In). This feature operates in the same manner as in a non
networked switch.
Call Offer/Call Waiting (Camp On). This feature operates in the same manner as in
a non networked switch. When a called station is busy the caller can press a camp
on key and appear as a ringing call on the second call button. The Auto camp on
feature will not work on calls across a network link if set to ON in MMC 110.
Call Transfer. Calls answered in one network node can be transferred to a station or...

OFF PREMISES EXTENSIONS (OPX)
A single line (tip and ring) extension from an SLI card may be connected to tele-
phone company-provided OPX circuits to remote locations. 8SLI cards and KDb-
SLIs do not support off premises extensions.
OPERATOR GROUP
The operator group can contain 32 stations to answer incoming calls. Calls to this
group can be set for distributed, sequential or unconditional ringing. Operators
can use the In/Out of Group feature to meet flexible operator requirements. Opera-
tor groups...

PRIME LINE SELECTION
Any station can be programmed to select a specific line, trunk group, telephone
number, station or station group when the handset is lifted or the speaker key is
pressed (same as Hot Line feature).
PRIVATE LINES
For private line use, stations can be prevented from dialing and/or answering any line.
PROGRAMMABLE TIMERS
There are over 50 programmable system timers to allow each installation to be
customized to best fit the end user’s application.
RECALLS
Calls put on hold, transferred...

TEMPORARY OVERRIDE
At any time the system can be forced into a specific ring plan for a temporary pe-
riod of time until the next scheduled ring plan automatically takes effect.
RING OVER PAGE
Any outside line can be programmed to ring over a customer-provided paging
system. Outside lines, door phones and station groups may ring over page in the
day or night mode.
SECRETARY POOLING
Each keyset may be defined as an executive (BOSS in programming) or a secre-
tary (SECY in programming) in system...