Samsung Idcs 100 Digital Communications System General Description Manual

C**************************** INDIVIDUAL TRUNKS **************************
  
1TRUNK   2TRUNK-NAME    3ATTA    4ANSD    5NOT-ANSD    6OUTGOING  7BUSY
     701                   0000     0000       0000         0000    0000
     702                   0000     0000       0000         0000    0000
     703                   0000     0000       0000         0000    0000
     704                   0000     0000       0000         0000    0000
     705                   0000     0000       0000         0000...

2. GROUP: Listing of all station groups in the system.
3. ANSD: This column is a peg count of all answered trunk calls that rang to the spe-
cific group directory number regardless of how these arrived.
4. NOT-ANSD: The number of times any trunk call directed to the specific group num-
ber was not answered by any member of the group.
5. INTERCOM: An intercom call made from a station or device within the system to the
specific group number.
6. ANSD: This is a count of how many times an intercom call was...

8. ICM-TRSF: This is the number of times a trunk call was successfully transfered to
another station using the intercom. It includes both screened and unscreened trans-
fer.
9. TRK–TRK: This is the number of times a trunk call was transfered to another trunk (tie
line) This is called a trunk–to–trunk transfer. This field gets pegged every time the
station completes a trunk to trunk transfer.
10. PICKUP: This is a count of the outside calls that were picked up by the specific
station. Picked-up calls are...

4.56
4.11 SAMPLE ALARM REPORT
ALARM REPORT FOR [                 ] Apr/17/2002 01:05
           04/17/2002  00:59:18   MJD01  Sync Failure      SLOT#7
           04/17/2002  00:59:18   MJD03  Red Alarm         SLOT#7
           04/17/2002  00:59:18   MJD21  PCM Loss          SLOT#7
           04/17/2002  00:59:18   MJD18  T1 Restart        SLOT#7 

PART 5. GENERAL USER INFORMATION
5.1 RADIO FREQUENCY INTERFERENCE
WARNING: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is oper-
ated in a commercial environment. This equipment generates, uses and can radiate ra-
dio frequency energy. If not installed and operated in accordance with the instruction
manual, it...

5.3TELEPHONE COMPANY INTERFACES
CIRCUIT TYPE FIC NETWORK JACK
RJ21X
C.O. LINE—LOOP START O2LS2 RJ11C
RJ14C
E & M TIE LINE TL11M RJ2GX
RJ21X
OFF PREMISES EXTENSION OL13C RJ11C
RJ14C
NOTE: Allowing this equipment to be operated in such a manner as to not provide for
proper answer supervision is a violation of part 68 of the FCC’s rules.
RINGER EQUIVALENCE (REN)
The REN is used to determine the quantity of devices which may be connected to the
telephone line. Excessive RENs on the telephone line may result...

FIELD REPAIRS
Only technicians certified on the iDCS 100 are authorized by SAMSUNG TELECOMMU-
NICATIONS AMERICA to perform system repairs. Certified technicians may replace modular
parts of a system to repair or diagnose trouble. Defective modular parts can be returned
to SAMSUNG TELECOMMUNICATIONS AMERICA for repair.
GENERAL
This equipment must not be used on coin telephone lines. Connection to party line ser-
vice is subject to state tariffs.
HEARING AID COMPATIBILITY
All models of the keyset are...

5.6 EQUAL ACCESS REQUIREMENT
This equipment is capable of providing user access to interstate providers of operator
services through the use of access codes. Modifications of this equipment by call
aggregators to block access dialing codes is a violation of the Telephone Operator Con-
sumers Act of 1990 and Part 68 of the FCC Rules.
5.4 

NOTES 

NOTES