Home
>
Samsung
>
Communications System
>
Samsung Idcs 100 Digital Communications System General Description Manual
Samsung Idcs 100 Digital Communications System General Description Manual
Here you can view all the pages of manual Samsung Idcs 100 Digital Communications System General Description Manual. The Samsung manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 11
PART 2. HARDWARE DESCRIPTIONS 2.1 KEY SERVICE UNIT The iDCS 100 (see Figure 2–1) is a metal cabinet containing the following: !A power supply (120 VAC) with battery backup (48VDC) connection !Processing, switching and the system operating program !Eight 2B + D digital keyset interfaces !One MOH/BGM input source (switch selectable between internal chimes and external input) !One page output 2.2 EXPANSION CABINETS One of two optional cabinets may be used (see Figure 2–2) and they consist of a metal case...
Page 12
2.3 MEM3 AND MEM4 CARD To operate, the KSU must be equipped with an iDCS 100 MEM3 or an iDCS MEM4 card to hold the system software and customer database. The software is stored in EPROM chips for the iDCS 100 MEM3 card in Flash Memory on an iDCS 100 MEM4 card. All specific customer data is stored in non-volatile random access memory (NV-RAM). The MEM3 and MEM4 cards are both protected by a super capacitor providing up to seven days of memory protection in the event of loss of AC power to the system. 2.4...
Page 13
2.3 2 E & M x 4 DLI This card provides two two wire (TL11M) tie line interfaces and four 1B+D DLI ports. KDb’s cannot be used with this card. This is the same card used on the DCS Compact. S4BRI This card provides 4 ISDN Basic Rate Interface (BRI) S/T circuits with the ability to support two channels per circuit for a total of 8 channels. A system can have up to six of these cards. These S/T circuits can be configured for station or trunk use. An NT1 is required for connection to a telephone company BRI...
Page 14
2.4 FKDBD If your iDCS keyset is connected to a Digital Line Interface (DLI) port that supports 2B+D operation (your installing company can determine this) you may install a daughter mod- ule that provides a Digital Line Interface (DLI) port for connection of a digital station device such as a keyset or 64 button module. KDb-DLI This board, if installed in a digital keyset connected to one of the eight DLI ports on the motherboard, will provide a second DLI port for the connection of a digital station...
Page 15
No external line or power connections are necessary, these are accomplished directly through the phone system. At the time of this writing the memory capacity is about 100 hours, although as time goes on, improvements in technology will allow for changes in storage time. The SVMi-8’s modular design allows it to be expanded to add voice ports as needed. Only one SVMi-8 card can be installed in a system, do not use other voice mail system in combination with SVMi-8. SVMi-4 The SVMi-4 is a self contained...
Page 16
2.6 2.5 STATION EQUIPMENT iDCS 28D KEYSET (See Figure 2–7) !32 character display (2 x 16) with three associated soft keys and a scroll key !28 programmable keys with tri-colored lights !Four fixed function keys !Terminal Status Indicator !Built-in speakerphone !Eight selectable ring tones !UP/DOWN buttons for digital control of speaker, handset and ringer volumes !Desk- or wall-mounted !Available in dark gray or light gray iDCS 18D KEYSET (See Figure 2–8) !32 character display (2 x 16) with three...
Page 17
2.7 iDCS 8D KEYSET (see Figure 2–9) !32 character display (2 x 16) with three associated soft keys and a scroll key !8 programmable keys with tri-colored lights !Four fixed function keys !Terminal Status Indicator !Built-in speakerphone !Eight selectable ring tones !UP/DOWN buttons for digital control of speaker, handset and ringer volumes !Desk- or wall-mounted !Available in dark gray or light gray iDCS 64B AOM (See Figure 2–10) !64 programmable keys with red lights !A maximum of 2 can be assigned to...
Page 18
2.8 DCS LCD 24B Keyset (See Figure 2–11) !Built-in speakerphone !24 programmable keys (16 with tri-col- ored LEDs) !Four fixed function keys !32 character display (2 x 16) with three associated soft keys and a scroll key !UP/DOWN buttons for digital control of speaker, handset and ringer volumes !Eight selectable ring tones !Desk- or wall-mounted !Available in almond or charcoal DCS LCD 12B Keyset (see Figure 2–12) !32 character display (2 x 16) with three associated soft keys and a scroll key !Built-in...
Page 19
2.9 Single Line Telephone (See Figure 2–14) !Four fixed function keys: hold, flash, new call, and monitor. !Data Port: selectable to share station ex- tension or utilize a separate extension !On hook dialing !Message Waiting/Ring Indicator !Desk or wall mounted !Ring volume control !Four available ring tones. !Available in almond and black Note: This single line telephone set is FCC approved for direct connection to the public telephone network. FCC # A3LKOR-24627-TE-T REN 0.9B. UL LISTED 19X9 FILE #...
Page 20
2.10 64 Button Module (See Figure 2–17) !64 programmable keys !Available in almond and charcoal !A maximum of 2 can be assigned to any keyset to provide additional programmable keys !A maximum of 4 per iDCS 100 System FIGURE 2–17 Door Phone Interface Module (DPIM) and Door Phone (see Figures 2–18 and 2–19) !The DPIM adapts any DLI circuit for use with the door phone unit !Commonly used to request entry through locked doors (interior or exterior) or as a room monitoring box !Provides contact control to be...