Ricoh Sp C410dn Service Manual

							Attaching the Camera Direct Print Card
49
2
EReattach the cover over the Camera Direct Print card. Fasten the screw to se-
cure the cover.
Note
❒Do not touch the Camera Direct Print card while the printer is in use. It
may come loose, even if pushed only slightly.
AQC107S 
						

							Installing Options
50
2Attaching VM Card Type D
Important
❒Protect VM Card Type D from physical shocks.
❒Use the right slot for the VM card.
ACheck the package contains the following:
❖VM Card Type D
BTurn off the power, and then unplug the power cable.
CRemove the cover of the controller boards center expansion card slot.
DCarefully insert the VM card, until the card clicks into place.
AET104S
AQC105S
AQC106S 
						

							Attaching VM Card Type D
51
2
EReattach the cover over the VM card. Fasten the screw to secure the cover.
Note
❒Do not touch the VM card while the printer is in use. It may come loose,
even if pushed only slightly.
AQC107S 
						

							Installing Options
52
2Attaching Data Storage Card Type A
Important
❒Protect Data Storage Card Type A from physical shocks.
❒Use the right slot for the Data Storage card.
ACheck the package contains the following:
❖Data Storage Card Type A
BTurn off the power, and then unplug the power cable.
CRemove the cover of the controller boards central expansion card slot.
DCarefully insert the Data Storage card, until the card clicks into place.
AET104S
AQC105S
AQC106S 
						

							Attaching Data Storage Card Type A
53
2
EReattach the cover over the Data Storage card. Fasten the screw to secure the
cover.
Note
❒Do not touch the Data Storage card while the printer is in use. It may come
loose, even if pushed only slightly.
AQC107S 
						

							Installing Options
54
2 
						

							55
3. Connecting the Printer
Network Connection
Follow the procedure below to connect the printer to the computer through the
network. Prepare the hub and other network devices before connecting the
10BASE-T or 100BASE-TX cable to the printers Ethernet port.
Alternatively, the optional gigabit ethernet board, which supports 1000BASE-T,
is available.
Important
❒Use shielded Ethernet cable. Unshielded cables create electromagnetic inter-
ference that could cause malfunctions.
❒The Ethernet cable is not supplied with this printer. Select your cable accord-
ing to the network environment. 
AAttach one ferrite core at the printer end of the Ethernet cable, and then at-
tach the other ferrite core about 10 cm (4 inches) ( ) from this core.
BConnect the Ethernet cable to the Ethernet port.
AET121S
AET122S 
						

							Connecting the Printer
56
3
CIf the gigabit ethernet board is attached, connect the ethernet cable to the
board.
The printers ethernet and USB ports are not available when the gigabit eth-
ernet board is attached to the printer.
DConnect the other end of the cable to the printers network, such as a hub.
Note
❒The printers ethernet and USB ports are not available when the gigabit
ethernet board is attached to the printer.
Reference
For details about network environment settings, see Software Guide.
For details about attaching the gigabit ethernet board, see p.43 “Attaching
Gigabit Ethernet Board Type A”.
AQC056S 
						

							Network Connection
57
3
Reading the LED Lamps
❖For standard ethernet port
1.Yellow: comes on when 100BASE-
TX is being used. It comes off when
10BASE-T is being used.2.Green: comes on when the printer
is properly connected to the net-
work.
❖For gigabit ethernet board
1.Green: comes on when 10BASE-T
is being used.2.Yellow: comes on 100BASE-TX is
being used.
Green and yellow lamps are lit when
1000BASE-T is being used.
AQC070S
AQC070S 
						

							Connecting the Printer
58
3USB Connection
Important
❒USB2.0 interface cable is not supplied. Obtain it separately, according to the
computer you are using.
❒USB connection is possible under Windows 98 SE/Me/2000/XP, Windows
Server 2003, Mac OS 9.x, and Mac OS X.
❒Windows 98SE/Me supports USB1.1 speeds.
❒USB connection with Macintosh is only possible via the printers USB port. 
AConnect the square-shaped connector of the USB2.0 cable to the USB port.
BIf the gigabit ethernet board is attached, connect the square-shaped connec-
tor of the USB2.0 cable to the USB port of the board.
The printers ethernet and USB ports are not available when the gigabit eth-
ernet board is attached to the printer.
CConnect the opposite ends flat connector to devices such as your compu-
ters USB interface, or a USB hub.
Reference
For details about attaching the gigabit ethernet board, see p.43 “Attaching
Gigabit Ethernet Board Type A”.
For details about settings for USB connection printing, see Software Guide.
AET124S
AQC055S