Ricoh Mp C306 User Guide

6.Press [OK].
7. Press [User Tools] (
) on the top right of the screen.
8. Press [Home] (
) at the bottom of the screen in the center.
Specifying a custom size paper using the control panel
1. Press [Home] () at the bottom of the screen in the center.
2. Flick the screen to the left, and then press the [User Tools] icon (
) on Home screen 4.
3. Press [Tray Paper Settings].
4. Press [Printer Bypass Paper Size].
5. Press [Custom Size].
If a custom size is already specified, press [Change Size].
6. Press...

• Use A4 or 81
/ 2 × 11 size OHP transparencies, and specify their size.
• Usually only one side of OHP transparencies can be used for printing. Be sure to load them with the print side down.
• When printing onto OHP transparencies, remove printed sheets one by one.
1. Press [Home] (
) at the bottom of the screen in the center.
2. Flick the screen to the left, and then press the [User Tools] icon (
) on Home screen 4.
3. Press [Tray Paper Settings].
4. Press [Printer Bypass Paper Size], and then specify...

Settings for the User Tools• Copier modeSpecify [Yes] for [Letterhead Setting] in [Input / Output] under the Copier / Document Server
Features menu, and then place the original and paper as shown below.
• Printer mode Specify [Auto Detect] or [On (Always)] for [Letterhead Setting] in [System] under the Printer
Features menu, and then place the paper as shown below.
For details about the letterhead settings, see "Input / Output", Copy/ Document Server, or "System", Print.
Original...

Original orientationExposure glassADFUnreadable
orientation• Copy
• Scanner
• Paper orientation
• Copier mode
Copy sidePaper traysBypass trayOne-sidedTwo-sidedUnavailable
• Printer mode
Print sidePaper traysBypass trayOne-sidedTwo-sidedUnavailable
• In copier mode: • For details about how to make two-sided copies, see page 65 "Duplex Copying".
9. Adding Paper and Toner
132              

• In printer mode:• To print on letterhead paper when [Auto Detect] is specified for [Letterhead Setting], you mustspecify [Letterhead] as the paper type in the printer driver's settings.
• If a print job is changed partway through printing from one-sided to two-sided printing, one- sided output after the first copy may be printed facing a different direction. To ensure all
paper is output facing the same direction, specify different input trays for one-sided and two-
sided printing. Note also that...

Recommended Paper
Recommended Paper Sizes and Types
This section describes recommended paper sizes and types.
• If you use paper that curls, either because it is too dry or too damp, a paper jam may occur. • Do not use paper designed for inkjet printers, as these may stick to the fusing unit and cause a misfeed.
• When you load OHP transparencies, check the front and back of the sheets, and place them correctly, or a misfeed might occur.
Tray 1
Paper type and weightPaper sizePaper capacity60–163 g/m 2...

Trays 2 and 3Paper type and weightPaper sizePaper capacity60–163 g/m2
 (16 lb. Bond–
90 lb. Index)
Plain Paper 1–Thick Paper 2Select the paper size using the
Tray Paper Settings menu:
A4
, A5, B5 JIS, 8 1
/ 2 ×
14
, 8 1
/ 2 × 13, 8 1
/ 2 ×
11
, 8 1
/ 4 × 14, 8 1
/ 4 ×
13
, 8 × 13, 7 1
/ 4 ×
10 1
/ 2
, 5 1
/ 2 × 8 1
/ 2,
8 1
/ 2 × 12
, 8 1
/ 2 × 13 2
/ 5
500 sheets60–163 g/m 2
 (16 lb. Bond–
90 lb. Index)
Plain Paper 1–Thick Paper 2Custom size:
Vertical: 139.5–216.0 mm
Horizontal: 210.0–356.6 mm
Vertical:...

Paper type and weightPaper sizePaper capacity60–220 g/m2
 (16 lb. Bond–
80 lb. Cover)
Plain Paper 1–Thick Paper 3Custom size *2
:
Vertical: 76.2–216.0 mm
Horizontal: 139.0–600.0 mm
Vertical: 3.00–8.50 inches
Horizontal: 5.48–23.62
inches
• Plain Paper 1–Plain Paper 2: 100 sheets
• Middle Thick–Thick Paper 3: *3OHP transparenciesA4, 81
/ 2 × 1110 sheetsTranslucent paperA410 sheetsLabel paper (adhesive labels)A4, 8 1
/ 2 × 111 sheetEnvelopesSelect the paper size *1
:
4 1
/ 8 × 9 1
/ 2
, 3 7
/ 8 × 7 1
/ 2
,...

*1Print quality will decrease if the paper you are using is close to the minimum or maximum weight.
Change the paper weight setting to thinner or thicker.
• Certain types of paper, such as translucent paper or OHP transparencies, may produce noise
when delivered. This noise does not indicate a problem and print quality is unaffected.
• The paper capacity described in the tables above is an example. Actual paper capacity might be lower, depending on the paper type.
• When loading paper, make sure the...

• Remove copied or printed sheets one by one.
• When loading translucent paper: • When loading translucent paper, always use long grain paper, and set the paper directionaccording to the grain.
• Translucent paper easily absorbs humidity and becomes curled. Remove curl in the translucent paper before loading.
• Remove copied or printed sheets one by one.
• When loading coated paper: • To print on coated paper from the bypass tray or paper trays: press [User Tools], press [TrayPaper Settings], and then,...