Ricoh Mp C3000 Service Manual

 
SM 5-233 B230/B237/D042 
Service 
Tables 
Enables/disables initiating a call  when the front door remains open. 
Jam Detection: Time Length 
[3 to 30 / 10 / 1 minute /step] 
011* 
Sets the time a jam must remain before it becomes an “unattended paper 
jam”. This setting is enabled only when SP5508-004 is set to 1. 
Jam Detection: Continuous 
Count  [2 to 10 / 
5 / 1 /step] 
012* 
Sets the number of consecut ive paper jams required to initiate a call. This 
setting is enabled only when SP5508-004 is set...

 
B230/B237/D042 5-234 SM 
001 SC Call 
002 Service Parts Near End 
Call 
003  Service Parts End Call 
004 User Call  [0 or 1 / 
1 / - ] 
0: Off 
1: On 
006 Communication Test Call
007  Machine Information 
Notice 
008 Alarm Notice 
009 Non Genuine Toner 
Alarm 
010 Supply Automatic 
Ordering Call 
011 Supply Management 
Report Call 
012  Jam/Door Open Call  [0 or 1 / 
1 / - ] 
0: Off 
1: On 
 
5516   [Individual PM Part 
Alarm Call]
  *CTL - 
001  Disable/ Enable Setting  Enables or disables t
he PM...

 
SM 5-235 B230/B237/D042 
Service 
Tables 
 
5610   [ACC Factory Setting]  
Recall -  - 
004 
Recalls the factory settings. 
Overwrite -  - 
005 
Overwrites the current values  onto the factory settings. 
Previous Setting -  - 
006 
Recalls the previous settings. 
 
5611   [Toner Color in 2C]  
B-C *ENG [0 to 128 / 
100 / 1 /step] 
128: Darkest density 
001 
Adjusts the Cyan correction value of  the blue signal in two-color mode. 
B-M *ENG[0 to 128 / 
100 / 1 /step] 
128: Darkest density 
002 
Adjusts...

 
B230/B237/D042 5-236 SM 
128: Darkest density 
Adjusts the Yellow correction value of the blue signal in two-color mode. 
 
5618   [Color Mode Display Selection]  
- *CTL [0 or 1 / 
1 / - ] 
0: ACS, Colour, Black & White, Two Colour, 
Single colour 
1: ACD, Full Colour, Black & White   
001 
Selects the color selection display on the LCD. 
 5801   [Memory Clear] 
NOTE
: For more information, see “NOTE 1” following SP8-xxx table. 
001 All Clear 
  Resets all correction data for process 
control and all...

 
SM 5-237 B230/B237/D042 
Service 
Tables 
Clears the copy application settings. 
Fax Application  -  - 
007 
Clears the fax application settings. 
Printer Application  -  - 
008 Clears the printer application settings. 
Scanner Application  -     - 
009 
Clears the scanner application settings. 
Web Service/Network 
Application  -   - 
010 
Delete the netfile application management files and thumbnails, and 
initializes the job login ID. 
NCS -  - 
011 Initializes the system default and in
terface...

 
B230/B237/D042 5-238 SM 
Initializes the CCS (Certification and Charge-control Service) settings. 
SRM Memory Clr  -  - 
018 
Initializes the SRM (System Resource Manager) settings. 
LCS -  - 
019 
Initializes the LCS (Log Count Service) settings. 
WebUapl  - 
020 
Initializes the WebUapl settings. 
 
[Free Run] 
5802  Performs a free run on the copier engine. 
 
ƒ  The machine starts free run in  the same condition as the sequence 
of A4/LT, A3 or A4 SEF printing from the 1st or 2nd tray. Therefore,...

 
SM 5-239 B230/B237/D042 
Service 
Tables 
NOTE:  Turn the main switch off and on after resetting the SC code. 
001  Fusing SC Reset  -  - 
 
5811   [Machine Serial]  Machine Serial Number Display 
002  Display  *ENG Displays the machine serial number. 
 
5812   [Service Tel. No. Setting]  
Service *CTL  - 
001 Sets the telephone number for a servic
e representative. This number is 
printed on the Counter List, which can  be printed with the user’s “Counter” 
menu. 
This can be up to 20 characters (both...

 
B230/B237/D042 5-240 SM 
5816  [Remote Service]  *CTL
- 
I/F Setting 
001  Selects the remote service setting. 
[0 to 2 / 
2 / 1 /step] 
0: Remote service off 
1: CSS remote service on 
2: NRS remote service on 
CE Call 
002  Performs the CE Call at the st
art or end of the service. 
[0 or 1 /  0 / 1 /step] 
0: Start of the service 
1: End of the service 
ƒ  This SP is activated only when SP 5816-001 is set to “2”. 
Function Flag 
003  Enables or disables the remote service function. 
[0 to 1 / 
0 / 1...

 
SM 5-241 B230/B237/D042 
Service 
Tables 
Specifies the connect timeout  interval when calling the RCG. 
[1 to 90 /  10 / 1 second /step] 
RCG Write Timeout 
009 
Specifies the write timeout  interval when calling the RCG. 
[1 to 100 /  60 / 1 second /step] 
RCG Read Timeout 
010 
Specifies the read timeout interval when calling the RCG. 
[1 to 100 /  60 / 1 second /step] 
Port 80 Enable  - 
011  Enables/disables access via port 80 to the SOAP method. 
[0 or 1 / 
0 / – ] 
0: Disabled 
1: Enabled 
RCG –...

 
B230/B237/D042 5-242 SM 
062 Use Proxy This SP setting determines 
if the proxy server is 
used when the machine communicates with the 
service center. 
Proxy Host 
063  This SP sets the address of the proxy server used for communication 
between Cumin-N and the gateway. Use this SP to set up or display the 
customer proxy server address. The 
address is necessary to set up Cumin-N. 
ƒ  The address display is limited to  128 characters. Characters beyond 
the 128 character are ignored.   
ƒ  This...