Ricoh Mp C3000 Service Manual

 
SM 5-243 B230/B237/D042 
Service 
Tables 
ƒ  This name is customer informati on and is not printed in the SMC 
report. 
CERT: Up State 
Displays the status of  the certification update. 
0  The certification used by  Cumin is set correctly. 
1 The certification request (setAu
thKey) for update has been received 
from the GW URL and certificat ion is presently being updated. 
2 The certification update is complet
ed and the GW URL is being notified 
of the successful update. 
3  The certification update...

 
B230/B237/D042 5-244 SM 
completed, but an certification error has been received, and the rescue 
certification is being recorded. 
18  The rescue certification of No. 
17 has been recorded, and the GW URL 
is being notified of the failure  of the certification update. 
CERT: Error 
Displays a number code that describes  the reason for the request for update 
of the certification. 
0  Normal. There is no request for  certification update in progress. 
1 Request for certification update in progress. The...

 
SM 5-245 B230/B237/D042 
Service 
Tables 
firmware update is done with the firmware files 
from the URL. 
086 Firmware Size  Allows the service technician to confirm the size of 
the firmware data files during the firmware update 
execution. 
087  CERT: Macro Version 
Displays the macro version of the NRS 
certification. 
088  CERT: PAC Version  Displays the PAC 
version of the NRS certification. 
089  CERT: ID2 Code  Displays ID2 for the NRS certification. Spaces are 
displayed as underscores (_)....

 
B230/B237/D042 5-246 SM 
ƒ SP5816-161 
0: Japan, 1: USA, 2: Canada, 3: UK, 4: Germany, 5: France, 6: Italy,   
7: Netherlands, 8: Belgiu m, 9: Luxembourg, 10: Spain 
Line Type Authentication Judgment 
151 Touch [Execute]. 
Setting this SP classifies the telephon
e line where Cumin-M is connected as 
either dial-up or push type, so Cumi n-M can automatically distinguish the 
number that connects to the outside line. 
ƒ  The current progress, success, or  failure of this execution can be 
displayed with...

 
SM 5-247 B230/B237/D042 
Service 
Tables 
0: Tone Dialing Phone 
1: Pulse Dialing Phone 
Inside Japan 2 may also be displayed: 
0: Tone Dialing Phone 
1: Pulse Dialing Phone 10PPS 
2: Pulse Dialing Phone 20PPS 
Outside Line/Outgoing Number 
154  The SP sets the number that switches
 to PSTN for the outside connection for 
Cumin-M in a system that employs a PBX (internal line). 
ƒ  If the execution of SP5816 151 has succeeded and Cumin-M has 
connected to the  external line, this SP display is...

 
B230/B237/D042 5-248 SM 
connected. This number is transmitted to and used by the Call Center to 
return calls. 
Limit: 24 numbers (numbers only) 
Connection Timing Adjustment: Incoming 
162  When the Call Center calls out to a Cu
min-M modem, it sends a repeating ID 
tone (*#1#). This SP sets the line remains open to send these ID tones after 
the number of the Cumin-M modem is dialed up and connected.   
[0 to 24 /  1 / 1 /step] 
The actual amount of time is this setti ng x 2 sec. For example, if you...

 
SM 5-249 B230/B237/D042 
Service 
Tables 
Normally, it is best to allow unlimited time for certification and ID2 update 
requests, and for the notific ation that the certification has been completed. 
However, Cumin-M generates charges based on transmission time for the 
customer, so a limit is placed upon the  time allowed for these transactions. 
If these transactions cannot  be completed within the allowed time, do this SP 
to cancel the time restriction. 
175  Modem Modulation Mode Setting 
FAX TX...

 
B230/B237/D042 5-250 SM 
1: Inquiry number error 
2: Registration in progress 
3: Proxy error (proxy enabled) 
4: Proxy error (proxy disabled) 
5: Proxy error (Illegal user name or password) 
6: Communication error 
7: Certification update error 
8: Other error 
9: Inquiry executing 
Confirm Place 
205 Displays the result of t
he notification sent to the device from the GW URL in 
answer to the inquiry request. Displayed only when the result is registered at 
the GW URL. 
206 Register Execute  Execut...

 
SM 5-251 B230/B237/D042 
Service 
Tables 
-11002  Chat execution error Parameter 
-11003 Unexpected error 
-12002 Inquiry, registration attempted without 
acquiring device status. 
-12003 Attempted registration without execution 
of an inquiry and no previous 
registration. 
Operation Error, 
Incorrect Setting 
-12004 Attempted setting with illegal entries for 
certification and ID2. 
-2385 Attempted dial up overseas without the 
correct international prefix for the 
telephone number. 
-2387  Not...

 
B230/B237/D042 5-252 SM 
5821  [Remote Service Address]   
001  CSS-PI Device Code  Sets the PI device code. After you change 
this setting, you must turn the machine off 
and on.   
[0 to 4 / 
0 / 1 /step] 
002 RCG IP Address  *CTL
Sets the IP address of the RCG (Remote 
Communication Gate) destination for call 
processing at the remote service center. 
  [NV-RAM Data Upload]  
5824  Uploads the UP and SP mode data (except for counters and the serial 
number) from the NVRAM to an SD card
. For...