Ricoh Mp C3000 Service Manual

 
SM 5-223 B230/B237/D042 
Service 
Tables 
 
[Display IP Address]  
5055 
Display or does not display the IP address on the LCD. 
001 -  *CTL[0 or 1 / 
0 / - ] 
0: Not display, 1: Display 
 
[Coverage Counter Display] 
5056 
Display or does not display t he coverage counter on the LCD. 
001 -  *CTL[0 or 1 / 
0 / - ] 
0: Not display, 1: Display 
 
[Eye Catch Icon ON/OFF]  
5057 
Display or does not display  the color mode icon on the LCD. 
001 -  *CTL[0 or 1 / 
1 / - ] 
0: Not display, 1: Display...

 
B230/B237/D042 5-224 SM 
[A3/DLT Double Count] SSP 
5104 
Specifies whether the counter is doubl e clicked for A3/DLT size prints. 
When you have to change this SP, ask your supervisor. 
5104 1  Double Count  *CTL[0 to 2 / 
0 / 1 /step] 
0: Normal count 
1: Double count 
2: Normal count for unknown size   
 
5112   [Non-Std. Paper Sel.]  Non-Standard Paper Selection 
001 Determines whether a non-standard paper 
size can be input for the universal 
cassette trays (Tray 2, and Optional paper tray unit...

 
SM 5-225 B230/B237/D042 
Service 
Tables 
001  This program disables copying. 
 
5120   [Mode Clear Opt. 
Counter Removal]
 *CTL
[
0 : Yes (removed) / 1: Standby (installed 
but not used)/ 2: No (not removed)] 
001  This program updates the information on the optional counter. When you install 
or remove an optional counter, check the settings. 
 
5121   [Counter Up Timing]  *CTL
[0: Feed / 1: Exit] 
001 This program specifies when the counter 
goes up. The settings refer to “paper 
feed” and “paper...

 
B230/B237/D042 5-226 SM 
5150  [By-Pass Length 
Setting]
  *CTL
[
0 : OFF/ 1: ON] 
001  Determines whether the transfer sheet fr
om the by-pass tray is used or not. 
Normally the paper length for sub scanni ng paper from the by-pass tray is 
limited to 600 mm, but this can be ex tended with this SP to 1260 mm. 
 
5162   [App. Switch Method]  *CTL
[0 : Soft Key Set/ 1: Hard Key Set] 
001  This program specifies the switch  that selects an application program. 
 
[Fax Printing Mode at Optional]  
5167...

 
SM 5-227 B230/B237/D042 
Service 
Tables 
 
 
 
 
[By-pass Size Error Detection]  
5179 
Turns on or off the by-pass tray size error message. 
001 -  *ENG[0 or 1 / 
0 / 1/step] 
0: OFF 
1: ON (Paper size error message is 
displayed when the paper jam occurs due 
to the wrong direction of set paper in 
by-pass mode.)   
 
 
 
 
[Size Adjust]  
5181 
Adjusts the paper size for each tray. 
001 TRAY 1  *ENG[0 to 3 / 
0 (NA/ASIA), 1 (EU) / 1 /step] 
0: A4 LEF, 1: LT LEF, 2: B5 LEF, 3: A5 LEF
002  TRAY 2: 1...

 
B230/B237/D042 5-228 SM 
007  TRAY 3: 2 (LCT)  *ENG[0 or 1 / 
0 (NA/ASIA), 1 (EU) / - ] 
0: A3, 1: DLT   
008  TRAY 3: 3 (LCT)  *ENG [0 or 1 / 
0 (NA/ASIA), 1 (EU) / - ] 
0: B4, 1: LG   
009  TRAY 3: 4 (LCT)  *ENG [0 or 1 / 
0 (NA/ASIA), 1 (EU) / - ] 
0: B5 LEF, 1: Exe LEF   
010  TRAY 4: 1  *ENG[0 or 1 / 
0 (NA/ASIA), 1 (EU) / - ] 
0: A4 LEF, 1: LT LEF   
011  TRAY 4: 2  *ENG[0 or 1 / 
0 (NA/ASIA), 1 (EU) / - ] 
0: A3, 1: DLT   
012  TRAY 4: 3  *ENG[0 or 1 / 
0 (NA/ASIA), 1 (EU) / - ] 
0: B4, 1: LG...

 
SM 5-229 B230/B237/D042 
Service 
Tables 
004  Duplex Printout High/Low 
Position 
[–10 to 10 / 
0 / 1 mm/step] 
 
[Set Time] 
5302  Adjusts the RTC (real time clock) ti
me setting for the local time zone. 
Examples: For Japan (+9 GMT), enter 540 (9 hours x 60 min.) 
DOM: +540 (Tokyo) 
NA: -300 (New York) 
EU: + 60 (Paris) 
CH: +480 (Peking) 
TW: +480 (Taipei) 
AS: +480 (Hong Kong) 
002 Time Difference   *CTL
#  [-1440 to 1440 / 
Area / 1 min./step ] 
 
5307   [Summer Time]  
Setting   [ 0 to 1 / 
NA,...

 
B230/B237/D042 5-230 SM 
5th and 6th digits: The hour. [00 to 23] 
7th digit: The length of the advanced time. [0 to 9 / 1 hour    /step] 
8th digit: The length of the advanced  time. [0 to 5 / 10 minutes /step] 
For example: 3500010 (EU default) 
The timer is advanced by 1 hour at  am 0:00 on the 5th Sunday in March 
ƒ  The digits are counted from the left. 
ƒ  Make sure that SP5-307-1 is set to 1. 
Rule Set (End)  -  - 
004 Specifies the end setting for the summer time mode. 
There are 8 digits in...

 
SM 5-231 B230/B237/D042 
Service 
Tables 
Method 
 
5404   [User Code Counter Clear]  
001  UCodeCtrClr    Clears all counters for users. 
 
5501   [PM Alarm]   *CTL - 
001 PM Alarm Level  [0 to 9999 / 
0 / 1 /step] 
0: Alarm  off 
1 to 9999: Alarm goes off when  Value (1 to 9999) 
x 1000 ≥  PM counter  
002 Original Count Alarm  [0 or 1 / 
1 / – ] 
0: No alarm sounds 
1: Alarm sounds after the number of originals 
passing through the ARDF  ≥ 10,000 
 
5504   [Jam Alarm]   *CTL - 
001 Sets the alarm to...

 
B230/B237/D042 5-232 SM 
001 - *CTL[0 to 255 / 
50/75 (C1a/C1b)  / 100 copies 
/step]  
 
5507   [Supply Alarm]  *CTL - 
001 Paper Supply Alarm 
0: Off, 1: On,  DFU  
002 Staple Supply Alarm 
0: Off, 1: On,  Japan only  
003 Toner Supply Alarm 
0: Off, 1: On,  DFU 
128 Interval :Others 
132 Interval :A3 
133 Interval :A4 
134 Interval :A5 
141 Interval :B4 
142 Interval :B5 
160 Interval :DLT 
164 Interval :LG 
166 Interval :LT 
172 Interval :HLT  [250 to 10000 / 1000
 / 1 /step] DFU 
 
5508 *  [CC...