Ricoh Mp C3000 Service Manual

 
SM 5-173 B230/B237/D042 
Service 
Tables 
JE: FC 
025  Correction Coefficient 2: 
JE: FC  *ENG
[0 to 1 /  1 / 0.01/step] 
026  Correction Coefficient 1: 
Interrupt: BW  *ENG
[0 to 1 /  0.1 / 0.01/step] 
027  Correction Coefficient 2: 
Interrupt: BW  *ENG
[0 to 1 /  1 / 0.01/step] 
028  Correction Coefficient 1: 
Interrupt: FC  *ENG
[0 to 1 /  0.25 / 0.01/step] 
029  Correction Coefficient 2: 
Interrupt: FC  *ENG
[0 to 1 /  1 / 0.01/step] 
030  Max. Number Correction 
Threshold  *ENG
[0 to 99 /  2 /...

 
B230/B237/D042 5-174 SM 
004 Hour *ENG
[0 to 23 /  0 / 1/step] 
005 Minute  *ENG
[0 to 59 /  0 / 1/step] 
 
[Environmental Display: Job End]  
3514 
Displays the environmental conditions for the last job. 
These are used for process  control execution timing. 
001 Temperature  *ENG
[-1280 to 1270 /  0 / 0.1°C/step] 
002 Relative Humidity  *ENG
[0 to 1000 / - / 0.1%RH/step] 
003 Absolute Humidity  *ENG
[0 to 1000 / - / 0.1 g/cm3/step] 
 
[Execution Interval: Display]  
3515  Displays the current...

 
SM 5-175 B230/B237/D042 
Service 
Tables 
mode. 
001  Dev. Motor Rotation: 
Display: Bk  *ENG
002 Dev. Motor Rotation: 
Display: M  *ENG
003 Dev. Motor Rotation: 
Display: C  *ENG
004 Dev. Motor Rotation: 
Display: Y  *ENG[0 to 1000 / 
0 / 1 m/step] 
005 Rotation Threshold  *ENG
[0 to 1000 / 1 / 1 m/step] 
006  Pixel Coverage Sum: Bk  *ENG
007  Pixel Coverage Sum: M  *ENG
008  Pixel Coverage Sum: C  *ENG
009  Pixel Coverage Sum: Y  *ENG [0 to 65535 / 
0 / 1 cm
2/step] 
010 Required Area: Bk  *ENG
011...

 
B230/B237/D042 5-176 SM 
Number: M 
020 Pattern Generation 
Number: C  *ENG
021 Pattern Generation 
Number: Y  *ENG
022 Pattern Generation 
Number: Upper limit  *ENG
[0 to 255 /  0 / 1 time/step] 
023  Toner Consumption 
Pattern Area  *ENG
[10 to 2550 /  320 / 10 cm2/step] 
024 Supply Coefficient  *ENG
[0 to 2.55 / 1 / 0.01/step] 
025  Job End Area Coefficient  *ENG
[0.1 to 25.5 / 1 / 0.1/step] 
026  Job End Vb Coefficient  *ENG
[0 to 100 / 40 / 1%/step] 
027  Job End Length  *ENG
[0 to 56 / 12 /...

 
SM 5-177 B230/B237/D042 
Service 
Tables 
004  Toner End Recovery: Y  *ENG
005 Vsg Adj.  *ENG[0 or 1 / 
0 / 1/step] 
0: OFF. 1: ON 
006 Developer Mixing  *ENG [0 or 1 / 
0 / 1/step] 
0: OFF. 1: ON 
007 Process Control  *ENG [0 or 1 / 
0 / 1/step] 
0: OFF. 1: ON 
008 MUSIC  *ENG[0 or 1 / 
0 / 1/step] 
0: OFF. 1: ON 
009  MUSIC (Skew 
Correction)  *ENG
[0 or 1 / 
0 / 1/step] 
0: OFF. 1: ON 
010 Charge AC Control  *ENG [0 or 1 / 
0 / 1/step] 
0: OFF. 1: ON 
011  Blade Damage 
Prevention  *ENG
[0 or 1 / 
0...

 
B230/B237/D042 5-178 SM 
002 Non-use Time Setting  *ENG
[0 to 1440 / 360 / 1 minute/step]   
003 Temperature Range  *ENG
[0 to 99 / 10 / 1°C/step] 
004  Relative Humidity Range  *ENG
[0 to 99 / 50 / 1 %RH/step] 
005  Absolute Humidity Range *ENG
[0 to 99 / 6 / 1 g/m3/step] 
 
[Non-use Time Process Control Setting]  
3531  Adjusts the threshold for the process control at stand-by.   
When the current condition has
 changed by more than the values of these SPs 
when compared with the conditions at  the...

 
SM 5-179 B230/B237/D042 
Service 
Tables 
007  C (Target Display)  *ENG
008  Y (Target Display)  *ENG Displays the target development gamma for 
each color.   
[0 to 5 / 
0.8 / 0.01 mg/cm2/kV /step] 
009  Bk (Standard Target Set)  *ENG Displays the standard target development 
gamma for each color.   
[0 to 5 / 
0.9 / 0.01 mg/cm
2/kV /step] 
010  M (Standard Target Set)  *ENG
011  C (Standard Target Set)  *ENG
012  Y (Standard Target Set)  *ENG [0 to 5 / 
0.8 / 0.01 mg/cm
2/kV /step] 
013 Environmental...

 
B230/B237/D042 5-180 SM 
003 Plain: C *ENG
004 Plain: Y *ENG
009  Thick 2 & FINE: Bk  *ENG
010  Thick 2 & FINE: M  *ENG
011  Thick 2 & FINE: C  *ENG
012  Thick 2 & FINE: Y  *ENG [0 to 700 / 
550 / 1 -V/step] 
 
[Charge DC Control: Display]  
Plain: 138 mm/sec, Thick 2 and Fin: 77 mm/sec 
3631  
Displays the charge DC volt age adjusted with the process control for each line 
speed and color. 
001 Plain: Bk  *ENG
002 Plain: M  *ENG
003 Plain: C *ENG
004 Plain: Y *ENG[0 to 2000 / 
690 / 1 -V/step] 
009...

 
SM 5-181 B230/B237/D042 
Service 
Tables 
002 Plain: M  *ENG
003 Plain: C *ENG
004 Plain: Y *ENG
 
[LD Power Control: Display]  
Plain: 138 mm/sec, Thick 2 and Fin: 77 mm/sec 
3651  
Displays the LD power adjusted for each environment. 
001 Plain: Bk  *ENG
002 Plain: M  *ENG
003 Plain: C *ENG
004 Plain: Y *ENG[0 to 200 / 
100 / 1 %/step] 
009  Thick 2 & FINE: Bk  *ENG
010  Thick 2 & FINE: M  *ENG
011  Thick 2 & FINE: C  *ENG
012  Thick 2 & FINE: Y  *ENG [0 to 200 / 
100 / 1 %/step] 
 
[HST...

 
B230/B237/D042 5-182 SM 
002 Vt *ENG
[0 to 5 /  2.5 / 0.1 V/step] 
003 Sensitivity: HL  *ENG
[0 to 5 /  2.5 / 0.1 V/step] 
004 Sensitivity: HM  *ENG
[0 to 5 / 1.3 / 0.1 V/step] 
005 Sensitivity: ML  *ENG
[0 to 5 / 1.2 / 0.1 V/step] 
006 Set Detection  *ENG
[0 to 5 /  1 / 0.1 V/step] 
007 Without Developer  *ENG
[0 to 5 / 1.2 / 0.1 V/step] 
008 With Developer  *ENG
[0 to 5 / 1.3 / 0.1 V/step] 
009  Serial Number 1  *ENG
010  Serial Number 2  *ENG [0 to 255 / 
- / 1 V/step] 
011 Adjustment: Vt  *ENG
[0...