Ricoh Mp C3000 Service Manual

 
SM 5-253 B230/B237/D042 
Service 
Tables 
SP5-828-50 is set to 1. 
065 Job Spooling  Enables/disables Job Spooling. 
[0 or 1 / 
0 / 1 / step] 
0: Disabled, 1: Enabled 
066  Job Spooling Clear: 
Start  Tim e  Treatment of the job when
 a spooled job exists at 
power on. 
0: ON (Data is cleared) 
1 : OFF (Automatically printed) 
069  Job Spooling (Protocol)  Validates or invalidates 
the job spooling function 
for each protocol. 
0 : Validates 
1: Invalidates 
bit0: LPR 
bit1: FTP 
bit2: IPP 
bit3: SMB...

 
B230/B237/D042 5-254 SM 
147 Active IPv6 Stateless 
Address 1 
149 Active IPv6 Stateless 
Address 2 
151 Active IPv6 Stateless 
Address 3 
153 Active IPv6 Stateless 
Address 4 
155 Active IPv6 Stateless 
Address 5  These SPs are the IPv6 status addresses (1 to 5) 
referenced on the Ethernet or wireless LAN 
(802.11b) in the format:   
Status Address + Prefix Length 
The IPv6 address consists of a total 128 bits 
configured in 8 blocks of 16 bits each. 
156 IPv6 Manual Address 
This SP is the IPv6...

 
SM 5-255 B230/B237/D042 
Service 
Tables 
Fonts) 
006  HDD Formatting (User 
Info) 
007  Mail RX Data   
008 Mail TX Data  
009 HDD Formatting (Data for 
a Design) 
010  HDD Formatting (Log) 
011 HDD Formatting (Ridoc 
I/F) 
 
5836  [Capture Settings]  *CTL - 
Capture Function (0:Off 1:On) 
0: Disable, 1: Enable 
001 
With this function disabled, the settings related to  the capture feature cannot 
be initialized, displayed, or selected. 
Panel Setting  0: Displayed, 1: Not displayed 
002 
Displays or...

 
B230/B237/D042 5-256 SM 
076  Reduction for Printer B&W HQ 
0: 1to-1, 1: 1/2, 2: 1/3, 3: 1/4 
077  Reduction for Printer Color 1200
1: 1/2, 3: 1/4, 4: 1/6, 5: 1/8 (2: skipped) 
078  Reduction for Printer B&W 1200
1: 1/2, 3: 1/4, 4: 1/6, 5: 1/8 (2: skipped) 
  5836-81 to 5836-86, Stored document format
 
The following 6 SP modes set Sets  the default format for stored documents 
sent to the document managem ent server via the MLB. 
Enabled only when optional MLB (Media  Link Board) is installed. 
081...

 
SM 5-257 B230/B237/D042 
Service 
Tables 
5839   [IEEE1394]   *CTL - 
007 Cycle Master  Turns the cycle master function on/off. 
[0 or 1 / 
1 / 1 /step] 
0: OFF   
1: ON 
008 BCR mode  Selects either ‘Standard’, IRM Color Copy, or 
Always Effective.
 
009 IRM 1394a Check  Turns the IRM 1394a check on/off. 
[0 or 1 / 
0 / - ] 
0: OFF   
1: ON 
If the IRM is not defined as 1394a standard, its 
node is used as IRM. 
010 Unique ID  [0 or 1 / 
1 / - ] 
0: OFF 
1: ON 
011 Logout  Prevents initiators from...

 
B230/B237/D042 5-258 SM 
Channel Max *CTL[1 to 11 or 13 / 
11  o r  1 3 / 1 /step] 
Europe/Asia: 1 to 13 
NA/ Asia: 1 to 11 
006  Sets the maximum number of channels available for data transmission via the 
wireless LAN. The number of channels ava
ilable varies according to location. 
The default settings are set for the ma ximum end of the range for each area. 
Adjust the upper 4 bits to se t the maximum number of channels.  DFU 
 
ƒ  Do not change the setting. 
Channel Min  *CTL[1 to 11 or 13 / 
1 /...

 
SM 5-259 B230/B237/D042 
Service 
Tables 
Yellow 
004  Toner Name Setting: 
Magenta 
007 OrgStamp 
011 Staple Std1 
012 Staple Std2 
013 Staple Std3 
014 Staple Std4 
 
5842   [GWWS Analysis Mode] DFU  
001 Setting 1  *CTLDefault: 00000000
 – do not change 
Netfiles: Jobs to be printed from the 
document server using a PC and the 
DeskTopBinder software 
002 Setting 2  *CTLAdjusts the debug program modesetting. 
Bit7: 5682 mmseg-log setting 
0: Date/Hour/Minute/Second 
1: Minute/Second/Msec. 
0 to 6:...

 
B230/B237/D042 5-260 SM 
number. DFU 
 
[Delivery Server 
Setting]  *CTL
- 
5845 
Provides items for deliv ery server settings. 
FTP Port No. 
[0 to 65535 / 3670 / 1 /step] 
001 
Sets the FTP port number used when image files to the Scan Router Server. 
IP Address  (Primary)  Range: 000.000.000.000  to 255.255.255.255 
002 
Use this SP to set the Scan Router Server address. The IP address under the 
transfer tab can be referenced by the initial system setting. 
Delivery Error Display Time  [0 to 999 /...

 
SM 5-261 B230/B237/D042 
Service 
Tables 
  Bit6 = 1 Direct specific ation of mail address possible 
  Bit5 = 1 Mail RX confirmation setting possible 
  Bit4 = 1 Address book autom atic update function exists 
  Bit3 = 1 Fax RX delivery function exists 
  Bit2 = 1 Sender password function exists 
  Bit1 = 1 Function to link MK-1 user and Sender exists 
  Bit0 = 1 Sender specification r equired (if set to 1, Bit6 is set 
to “0”)  capability of 
the registered 
that the I/O 
device 
registered. 
Delivery...

 
B230/B237/D042 5-262 SM 
NIA 
Capture Server Scheme 
019 
NIA 
Capture Server Port Number 
020 NIA 
Capture Server URL Path 
021 
NIA 
 
5846   [UCS Settings]  *CTL - 
Machine ID (For Delivery Server) 
Displays ID 
001 Displays the unique device ID in use by
 the delivery server directory. The 
value is only displayed and cannot be  changed. This ID is created from the 
NIC MAC or IEEE 1394 EUI. The ID is disp layed as either 6-byle or 8-byte 
binary. 
Machine ID Clear (For Delivery Server)  Clears ID...