Ricoh Mp C3000 Service Manual

 
SM 5-273 B230/B237/D042 
Service 
Tables 
001 Reboot Setting  *CTL Enables or disables 
the automatic reboot 
function when an SC error occurs. 
[0 or 1/  0 / – ] 
0: The machine reboots automatically 
when the machine issues an SC error and 
logs the SC error code. If the same SC 
occurs again, the machine does not 
reboot. 
1: The machine does not reboot when an 
SC error occurs. 
The reboot is not executed for Type A or C 
SC codes. 
002 Reboot Type  *CTL Selects the reboot method for SC. 
[0 or 1 /...

 
B230/B237/D042 5-274 SM 
3: Forbid fax TX (1) 
4: Forbid scan sending (1) 
5: Forbid downloading (1) 
6: Forbid delete (1) 
7: Reserved 
 
[Permit ROM Updating] DFU  
5886 
This SP determines whether  the ROM can be updated. 
001 -  *CTL   [0 or 1 / 
0 / 1/step] 
0: ON, 1: OFF 
 
[Plug & Play Maker/Model Name]  Plug & Play Name Selection 
5907  Specifies the manufacture
r and model name. These nam es are registered in 
the NVRAM. If the NVRA M becomes defective, these names should be 
re-registered....

 
SM 5-275 B230/B237/D042 
Service 
Tables 
5913   [Switchover Permission Time]  
Print Application Timer  *CTL 
[3 to 30 / 3 / 1 second /step] 
002  Sets the amount of time to elapse wh
ile the machine is in standby mode (and 
the operation panel keys have not bee n used) before another application can 
gain control of the display. 
 
5967   [Copy Server Set 
Function]
  *CTL 
 0 : ON, 1: OFF 
  Enables and disables the doc
ument server. This is a security measure that 
prevents image data from being...

 
B230/B237/D042 5-276 SM 
authentication are not available when this SP is 
set to 2. Even though you can change the initial 
settings of those netwo rk applications, the 
settings do not work. 
002  On Board USB  [0 or 1 / 
0 / 1/step] 
0: Disable, 1: Enable 
 
5987   [Counter Falsification Prevention]   
 001  0: OFF / 1: ON This SP detects that a mechanical counter device is 
removed. If it is detected, SC610 occurs.  
ƒ   The mechanical counter is provided only for 
NA model. 
 
[SP print mode]...

 
SM 5-277 B230/B237/D042 
Service 
Tables 
SP6-XXX (Peripherals) 
6006   [ADF Adj.]  ADF Adjustment 
  Adjusts the side-to-side and leading re gistration of originals with the ARDF. 
001 Side-to-Side Registration 
[-3.0 to 3.0 / 0 / 0.1 mm/step ] 
003  Leading Edge 
Registration  *ENG
[-5.0 to 5.0 /  0 / 0.1 mm/step ] 
  Adjusts the amount of paper buckle to 
correct original skew for the front and 
rear sides. 
005  Buckle: Duplex Front 
006  Buckle: Duplex Rear  *ENG
[-5.0 to 5.0 /  0 / 0.1 mm/step ]...

 
B230/B237/D042 5-278 SM 
009 Original Detection 
010  Rear Edge Detection 
011 Skew Correction 
013 Registration 
014 Exit 
015 Feed Cover 0: ADF cover close 
1: ADF cover open 
016 Lift Up 0: ADF  close 
1: ADF  open 
[ADF Output Check]
 
6008 
Activates the electrical co mponents for functional check. 
It is not possible to activate more  than one component at the same time. 
003  Feed Motor Forward  Feed Motor-Forward rotation 
004  Feed Motor Reverse Feed Motor-Reverse rotation 
005  Relay Motor...

 
SM 5-279 B230/B237/D042 
Service 
Tables 
 
[Stamp Position Adj.]  Fax Stamp Position Adjustment 
6010 
Adjusts the horizontal position of  the stamp on the scanned originals. 
6010 1  Stamp Position Adj.  *ENG
[-5.0 to 5.0 / 0 / 1 mm/step] 
 
[Original Size Detection Priority]  Original Size Detection Priority 
6016 
Specifies the original size for a size  detected by the original sensor, since 
original sensors cannot recognize all sizes. 
001  Original Size Detection 
Priority  *ENG[0 or 1 / 
0 / -...

 
B230/B237/D042 5-280 SM 
Adjusts the jogger position. 
001 - *ENG
[-4.0 to 4.0 /  0 / 0.4 mm/step] 
 
[Punch Position: Sub Scan]  
6128 
Adjusts the punching position  in the sub scan direction. 
001 Domestic 2Hole  *ENG
002 North America 3Hole  *ENG
003 Europe 4Hole  *ENG
004  North Europe 4Hole  *ENG
005  North Europe 2Hole  *ENG [-7.5 to 7.5 / 
0 / 0.5 mm/step]] 
 
[Punch Position: Main Scan]  
6129 
Adjusts the punching position in  the main scan direction. 
001 Domestic 2Hole  *ENG
002 North...

 
SM 5-281 B230/B237/D042 
Service 
Tables 
004 A4Y (LEF)  *ENG
005 B5T (SEF) *ENG
006 B5Y (LEF)  *ENG
007 DLT-T (SEF) *ENG
008 LG-T (SEF)  *ENG
009 LT-T (SEF) *ENG
010 LT-Y (LEF)  *ENG
011  12 x 18 *ENG
012 Other  *ENG
 
[Skew Correction Control]  
6131 
Selects the skew correction control  for each paper size. These are only 
activated for B793. 
001 A3T (SEF)  *ENG
002 B4T (SEF) *ENG
003 A4T (SEF) *ENG
004 A4Y (LEF)  *ENG
005 B5T (SEF) *ENG
006 B5Y (LEF)  *ENG
007 DLT-T (SEF) *ENG
008 LG-T (SEF)...

 
B230/B237/D042 5-282 SM 
012 Other *ENG
 
[Jogger Fence Fine Adj]  
6132  This SP adjusts the distance between t
he jogger fences and the sides of the 
stack on the finisher stapling tray in th e Booklet Finisher B793. The adjustment 
is done perpendicular to the direction of paper feed. 
001 A3T (SEF)  *ENG
002 B4T (SEF) *ENG
003 A4T (SEF) *ENG
004 A4Y (LEF)  *ENG
005 B5T (SEF) *ENG
006 B5Y (LEF)  *ENG
007 DLT-T (SEF) *ENG
008 LG-T (SEF)  *ENG
009 LT-T (SEF) *ENG
010 LT-Y (LEF)  *ENG
011  12 x 18...