Ricoh Mp C3000 Service Manual

Bit Switches 
SM 59 B786 
B786 
Fax Option 
I-fax Switch 02 [SP No. 1-102-003]  
No  FUNCTION  COMMENTS 
RX Text Mail Header Processing 
0 This setting determines whether the header in
formation is printed with text e-mails 
when they are received. 
0: Prints only text mail. 
1: Prints mail header information attached to text mail. 
When a text mail is received with this  switch On (1), the “From” address and 
“Subject” address are printed as header information. 
When a mail with only binary data is rece...

Bit Switches 
B786 60  SM 
5-6 Not Used  
Image Resolution of RX Text Mail 
7 This setting determines the image resolution of the received mail. 
0: 200 x 200 
1: 400 x 400 
The “1” setting requires installation of the Function Upgrade Card in order to have 
enough SAF (Store and Forward) memory to receive images at 400 x 400 
resolution. 
 
I-fax Switch 03 - Not used  (do not change the settings) [ SP No. 1-102-004] 
 
I-fax Switch 04 [SP No. 1-102-005]  
No  FUNCTION  COMMENTS 
Subject for Delivery...

Bit Switches 
SM 61 B786 
B786 
Fax Option 
Determines whether the e-mail addresses  of the destinations that receive 
transmissions broadcasted usi ng SMTP protocol are recorded in the Journal. 
For example: 
1st destination + Total number of desti nations: 9 in the Journal indicates a 
broadcast to 9 destinations. 
0: Not recorded 
1: Recorded 
1  I-Fax Automatic  Re-dial 
Setting 
0: OFF 
1: ON  Determines whether t
he I-fax automatically 
redials when an error occurs. 
2-7  Not Used  
 
I-fax Switch...

Bit Switches 
B786 62  SM 
I-fax Switch 0C - Not used (do not change the settings)  [SP No. 1-102-013] 
I-fax Switch 0D - Not used  (do not change the settings) [SP No. 1-102-014] 
I-fax Switch 0E - Not used  (do not change the settings)  [SP No. 1-102-015] 
 
I-fax Switch 0F [SP No. 1-102-016]  
No  FUNCTION  COMMENTS 
Delivery Method for SMTP RX Files 
0 This setting determines whether files receiv
ed with SMTP protocol are delivered or 
output immediately. 
0: Off. Files received via SMTP are  output...

Bit Switches 
SM 63 B786 
B786 
Fax Option 
3-7  Not used   Do not change the settings. 
 
Printer Switch 01 [SP No. 1-103-002]  
No  FUNCTION  COMMENTS 
0-2 Not used   Do not change the settings. 
3-4 Maximum print width used in 
the setup protocol 
Bit 4: 0, Bit 3: 0 = Not used 
Bit 4: 0, Bit 3: 1 = A3 
Bit 4: 1, Bit 3: 0 = B4 
Bit 4: 1, Bit 3: 1 = A4  These bits are only effective when bit 7 of printer 
switch 01 is “1”. 
5-6 
Not used   Do not change the settings. 
7 Received message width...

Bit Switches 
B786 64  SM 
1: Disabled 
5-7 Not used   Do not change the settings. 
 
Printer Switch 03 [SP No. 1-103-004]  
No  FUNCTION  COMMENTS 
0 Length reduction of received 
data 
0: Disabled 
1: Enabled  0: Incoming pages are 
printed without length 
reduction. 
(Page separation threshold: Printer Switch 03, bits 
4 to 7) 
1: Incoming page length is reduced when printing. 
(Maximum reducible length:  Printer Switches 04, 
bits 0 to 4) 
1-3  Not used  Do not change the settings 
4-7 Page...

Bit Switches 
SM 65 B786 
B786 
Fax Option 
Bit 6: 0, Bit 5: 0 = 4 mm 
Bit 6: 1, Bit 5: 0 = 10 mm 
Bit 6: 0, Bit 5: 1 = 15 mm 
Bit 6: 1, Bit 5: 1 =  Not used  
7 Not used.   Do not change the setting. 
 
Printer Switch 05 - Not used  (do not change the settings) 
 
Printer Switch 06 [SP No. 1-103-007]  
No  FUNCTION  COMMENTS 
0 Printing while a paper 
cassette is pulled out, when 
the Just Size Printing feature 
is enabled. 
0: Printing will not start 
1: Printing will start if another 
cassette has a...

Bit Switches 
B786 66  SM 
Printer Switch 0C - Not used (do not change the settings) 
Printer Switch 0D - Not used (do not change the settings) 
 
Printer Switch 0E [SP No. 1-103-015]  
No  FUNCTION   COMMENTS 
0 Paper size selection priority 
0: Width 
1: Length  0: A paper size that has the same width as the 
received data is selected first. 
1: A paper size which has enough length to print all 
the received lines without 
reduction is selected first.
1 Paper size selected for 
printing A4 width fax...

Bit Switches 
SM 67 B786 
B786 
Fax Option 
Bit 1: 1 Bit 0: 1 =  Not used 
2 Duplex printing 
0: Disabled 
1: Enabled  1: The machine always prints received fax 
messages in duplex printing mode: 
3 
Binding direction for Duplex 
printing 
0: Left binding 
1: Top binding  0: Sets the binding for the left edge of the stack. 
1: Sets the binding for 
the top of the stack. 
4-7 Not used   Do not change the settings. 
 
4.3.4 COMMUNICATION SWITCHES 
Communication Switch 00 [SP No. 1-104-001]  
No  FUNCTION...

Bit Switches 
B786 68  SM 
Communication Switch 01 [SP No. 1-104-002] 
No  FUNCTION  COMMENTS 
0 ECM 
0: Off 1: On   If this bit is set to 0, ECM is switched off for all 
communications. 
In addition, V.8 protocol and JBIG compression 
are switched off automatically. 
1 
Not used   Do not change the settings. 
2-3 Wrong connection prevention 
method 
Bit 3: 0, Bit 2: 0 = None 
Bit 3: 0, Bit 2: 1 = 8 digit CSI 
Bit 3: 1, Bit 2: 0 = 4 digit CSI 
Bit 3: 1, Bit 2: 1 = CSI/RTI  (0,1) - The machine will...