Ricoh Mp C3000 Service Manual

Beforehand 
SM 39 B786 
B786 
Fax Option 4. SERVICE TABLES 
4.1 BEFOREHAND 
 
ƒ  Never turn off the main power switch w hen the power LED is lit or flashing. To 
avoid damaging the hard disk or memory, press the operation power switch to 
switch the power off, wait for the power  LED to go off, and then switch the main 
power switch off. 
 
ƒ  The main power LED (
) lights or flashes while the platen cover or ARDF is 
open, while the main machine is communica ting with a facsimile or the network 
server,...

Service Tables 
B786 40  SM 
4.2 SERVICE TABLES 
4.2.1  SP1-XXX (BIT SWITCHES)   
 Bit Switches 
1  Mode No.  Function 
System Switch 
101 
001 – 032  00 – 1F  Change the bit switches fo
r system settings for the 
fax option  
 Bit Switches 
Ifax Switch 
102 
001 – 016  00 – 0F  Change the bit switches for internet fax settings for 
the fax option  
 Bit Switches 
Printer Switch 
103 
001 – 016  00 – 0F  Change the bit switches for printer settings for the 
fax option  
 Bit Switches 
Communication...

Service Tables 
SM 41 B786 
B786 
Fax Option 
001 – 016  00 – 0F  Not used (Do not change the bit switches) 
IP fax Switch 
111  
001 – 016  00 – 0F  Change the bit switches for optional IP fax 
parameters  
 Bit Switches 
4.2.2  SP2-XXX (RAM DATA) 
2
 Mode No.  Function 
RAM Read/Write 
101 
001   Change RAM data for the fax board directly. 
 Service RAM Addresses 
Memory Dump 
001 
G3-1 Memory 
Dump  Print out RAM data for the fax board.  Service RAM Addresses 
002 
G3-2 Memory 
Dump  Print out RAM...

Service Tables 
B786 42  SM 
000   Enter the fax unit’s serial number. 
PSTN-1 Port Settings 
001 Select Line Select the line type setting for the G3-1 line. If 
the machine is installed on a PABX line, select 
“PABX”, “PABX(GND)” or “PABX(FLASH)”. 
002 
PSTN Access 
Number  Enter the PSTN access number for the  
G3-1 line. 
103 
003 Memory Lock 
Disabled  Not used 
PSTN-2 Port Settings 
001 Select Line  Select the line setting for the G3-2 line. If the 
machine is installed on a PABX line, select...

Service Tables 
SM 43 B786 
B786 
Fax Option 
IPFAX Port Settings 
001  H323 Port  Sets the H323 port number. 
002  SIP Port  Sets the SIP port number. 
003  RAS Port  Sets the RAS port number. 
004  Gatekeeper port  Sets the Gatekeeper port number. 
005  T.38 Port  Sets the T.38 port number. 
006  SIP Server Port  Sets the SIP port number. 
107 
007 IPFAX Protocol 
Priority  Select H323 or SIP. 
FAX SW 201 
001 – 032  00 – 1F   
4.2.4  SP4-XXX (ROM VERSIONS) 
4 Mode No.  Function 
101  001  FCU ROM...

Service Tables 
B786 44  SM 
000 Resets the bit switches and user parameters, user data in 
the SRAM and files in the SAF memory. 
Initialize All  Bit  Switches 105 
000  Initializes all the current bit switch settings. 
Initialize Security Bit Switches 
106 
000  Initializes only the security 
bit switches. If you select 
automatic output/display for t he user parameter switches, 
the security settings are initialized. 
4.2.6 SP6-XXX (REPORTS) 
6  Mode No.  Function 
System Parameter List 
101 
000 -...

Service Tables 
SM 45 B786 
B786 
Fax Option 
004  Dch Link Layer 
005  Dch +Bch 2 
006  Bch 2 Link Layer 
All Files print out 
105 
000 -  Prints out all the user files in the SAF 
memory, including confidential messages.  
ƒ  Do not use this function, unless the 
customer is having trouble printing 
confidential messages or recovering 
files stored using the memory lock 
feature. 
Journal Print out 
001 All Journals  The machine prints all the communication 
records on the report. 106 
002 Specified...

Service Tables 
B786 46  SM 
002 1 Communication Prints the protocol 
dump list of the last 
communication for the IP fax line. 
 
4.2.7  SP7-XXX (TEST MODES) 
These are the test modes for PTT approval. 
7 Function 
101 G3-1 Modem Tests 
102 G3-1 DTMF Tests 
103 Ringer Test 
104  G3-1 V34 (S2400baud) 
105  G3-1 V34 (S2800baud) 
106  G3-1 V34 (S3000baud) 
107  G3-1 V34 (S3200baud) 
108  G3-1 V34 (S3429baud) 
109 Recorded Message Test 
110 G3-2 Modem Tests 
111  G 3 - 2  D T M F  Te s t s  
112  G3-2 V34...

Service Tables 
SM 47 B786 
B786 
Fax Option 
125  IG3-1 DTMF Tests -  Not used 
126  IG3-1 V34 (S2400baud) -  Not used 
127  IG3-1 V34 (S2800baud) -  Not used 
128  IG3-1 V34 (S3000baud) -  Not used 
129  IG3-1 V34 (S3200baud) -  Not used 
130  IG3-1 V34 (S3429baud) -  Not used 
131  IG3-2 Modem Tests -  Not used 
132  IG3-2 DTMF Tests -  Not used 
133  IG3-2 V34 (S2400baud) -  Not used 
134  IG3-2 V34 (S2800baud) -  Not used 
135  IG3-2 V34 (S3000baud) -  Not used 
136  IG3-2 V34 (S3200baud) -  Not...

Bit Switches 
B786 48  SM 
4.3 BIT SWITCHES 
 
ƒ  Do not adjust a bit switch or use a setti ng that is described as “Not used”, as this 
may cause the machine to malfunction or  to operate in a manner that is not 
accepted by local regulations. Such bits  are for use only in other areas, such as 
Japan. 
 
ƒ  Default settings for bit switches are not  listed in this manual. Refer to the System 
Parameter List printed by the machine. 
4.3.1 SYSTEM SWITCHES 
System Switch 00 [SP No. 1-101-001]  
No...