Ricoh Mp C3000 Service Manual

Dedicated Transmission Parameters 
SM 109 B786 
B786 
Fax Option 
1: On 
2  MMR Compression mode 
for e-mail attachments 
0
: Off 
1: On  Switches MMR compression on and off for files 
attached to e-mails for sending. 
3-6 
Not used   Do not change these settings. 
7 Designates the bits to 
reference for 
compression method of 
e-mail attachments 
0
: Registered (Bit 0 to 6) 
1: No registration.  The 0 selection (default) references the settings 
for Bits 00, 01, 02 above. The 1 selection ignores 
the...

Dedicated Transmission Parameters 
B786 110  SM 
attachment: 200 x 200 
0: Off 
1: On  200 x 200. 
2 
Line resolution of e-mail 
attachment: 200 x 400 
0
: Off 
1: On  Sets the line resolution of the e-mail attachment as 
200 x 400. 
3  Not used 
Do not change these settings. 
4 Line resolution of e-mail 
attachment: 400 x 400 
0
: Off 
1: On  Sets the line resolution of the e-mail attachment as 
400 x 400. 
5-6 
Not used   Do not change these settings. 
7 Designates the bits to 
reference for original...

Dedicated Transmission Parameters 
S M  111 B 7 86  
B786 
Fax Option 
 
Switch 06 - Not used  (do not change the settings) 
Switch 07 - Not used (do not change the settings) 
Switch 08 - Not used (do not change the settings) 
Switch 09 - Not used (do not change the settings) 
  

Service RAM Addresses 
B786 112  SM 
4.6 SERVICE RAM ADDRESSES 
 
ƒ  Do not change the settings which are  marked as “Not used” or “Read only.” 
680001 to 680004(H) - ROM version (Read only)  
680001(H) - Revision number (BCD) 
680002(H) - Year (BCD) 
680003(H) - Month (BCD) 
680004(H) - Day (BCD) 
680006 to 680015(H)  - Machine’s serial number (16 digits - ASCII) 
680018(H)  - Total program checksum (low) 
680019(H)  - Total program checksum (high) 
680020 to 68003F(H ) - System bit switches 
680050 to...

Service RAM Addresses 
SM 113 B786 
B786 
Fax Option 
Bit 0: Transmission result report (m emory transmissions) 0: Off, 1: On 
Bit 1: Not used 
Bit 2: Memory storage report 0: Off, 1: On 
Bit 3: Polling reserve report (po lling reception) 0: Off, 1: On 
Bit 4: Polling result report (polli ng reception) 0: Off, 1: On 
Bit 5: Transmission result report (immediate transmissions) 0: Off, 1: On 
Bit 6: Not used 
Bit 7: Journal 0: Off, 1: On 
6800D4(H) - User parameter switch 04 (SWUSR_04: Automatic report...

Service RAM Addresses 
B786 114  SM 
Bit 5: Remote control 0: Off, 1: On 
Bits 6 and 7: Not used 
6800D8(H) - User parameter switch 08 (SWUSR_08) 
Bits 0 and 1: Not used. 
Bit 2: Authorized reception  
0: Only faxes from senders whose RTIs/CSIs ar e specified for this feature are accepted. 
1: Only faxes from senders whose RTIs/CSI s are not specified for this feature are 
accepted. 
Bits 3 to 7: Not used. 
6800D9(H) - User parameter switch 09 (SWUSR_09) : Not used 
6800DA(H) - User parameter switch 10...

Service RAM Addresses 
SM 115 B786 
B786 
Fax Option 
(This switch is not printed on the user parameter list.) 
Bits 0, 1 and 2: Cassette for fax printout 
Bit 2: 0, Bit 1: 0, Bit 0: 1 = 1st paper feed station 
Bit 2: 0, Bit 1: 1, Bit 0: 0 = 2nd paper feed station 
Bit 2: 0, Bit 1: 1, Bit 0: 1 = 3rd paper feed station 
Bit 2: 1, Bit 1: 0, Bit 0: 0 = 4th paper feed station 
Bit 2: 1, Bit 1: 0, Bit 0: 1 = LCT 
Other settings Not used 
Bits 3 and 4: Not used 
Bit 5: Using the cassette specified by  bits 0,...

Service RAM Addresses 
B786 116  SM 
0: The Journal is separated into transmissions and receptions 
1: The Journal is separated into G3-1, G3-2, and G3-3 communications 
Bit 2: Not used 
Bit 3: 90 ° image rotation during B5 portrait Tx (T his switch is not printed on the user 
parameter list.) 0: Off, 1: On 
Bit 4: Reduction of sample images on reports to 50% in the main scan and sub-scan 
directions. (This switch is not printed on the user parameter list.) 0:  Technician adjustment 
(printer switch 0E...

Service RAM Addresses 
SM 117 B786 
B786 
Fax Option 
Bit 0: Dial tone detection (PST N 1) 0: Disabled, 1: Enabled 
Bits 1 to 7: Not used 
6800E7(H) – User parameter switch 23 (SWUSR_17) : Not used 
6800E8(H) - User parameter switch 24 (SWUSR_18) : Not used 
6800E9(H) - User parameter switch 25 (SWUSR_19)  
Bit 0: Not used 
Bit 1: Reception mode switch timer 0: Of f, 1: On (switching Fax or Fax/Tel) 
Bit 2: Mode priority switch 0: Fax first, 1: Tel first 
Bit 3: Dial in function (Japan Only) 
Bit 4: RDS...

Service RAM Addresses 
B786 118  SM 
680110 to 68012F(H) - G4 Internal Switches – Not used 
680130 to 68016F(H) - Service Switches 
680170 to 68017F(H) - IFAX Switches 
680180 to 68018F(H) - IP-FAX Switches 
680190 to 6801AF(H)  - Service station’s fax number (SP3-101) 
6801B0 to 6801B9(H)  - Own fax PABX extension number 
6801BA to 6801C3(H)  - Own fax number (PSTN) – Not used 
6801C4 to 6801D7(H)  - Own fax number (ISDN G4) – Not used 
6801D8 to 6801E3(H)  - The first subscriber number (ISDN G3) – Not...