Ricoh Mp C2003 User Guide

							12.Press [OK].
13. Select [E-mail / Internet Fax Destination] or [Internet Fax Destination Only].
If [E-mail / Internet Fax Destination] is specified, registered e-mail addresses appear in both Internet fax address display and E-mail address display on the fax function screen, and in theaddress display on the scanner function screen.
If [Internet Fax Destination Only] is specified, registered e-mail addresses only appear in Internet
fax display on the fax function screen.
14. If you want to use Internet fax, specify whether or not to use "Send via SMTP Server".
15. Press [OK].
16. Press [Exit].
17. Close the initial settings screen.
• When using the standard operation panel Press the [User Tools/Counter] key.
• When using the Smart Operation Panel Press [User Tools/Counter] (
) on the top right of the screen.
Deleting an E-mail Destination
1. Display the initial settings screen.
• When using the standard operation panel Press the [User Tools/Counter] key.
• When using the Smart Operation Panel Press the [Home] key on the top left of the control panel. Flick the screen to the left, and then
press the [User Tools] icon (
) on the Home screen 4.
2. Press [Address Book Mangmnt].
3. Check that [Program / Change] is selected.
4. Select the name whose e-mail address you want to delete.
Press the name key, or enter the registered number using the number keys. You can search by the
registered name, user code, fax number, folder name, e-mail address, or IP-Fax destination.
5. Press [E-mail].
6. Press [Change] under "E-mail Address".
7. Press [Delete All], and then press [OK].
8. Press [OK].
9. Press [Exit].
Basic Procedure for Sending Scan Files by E-mail
129  
						

							10.Close the initial settings screen.
• When using the standard operation panel Press the [User Tools/Counter] key.
• When using the Smart Operation Panel Press [User Tools/Counter] (
) on the top right of the screen.
Entering an E-mail Address Manually
1. Press [Manual Entry].
2.Enter the e-mail address.
3. Press [OK].
6. Scan
130  
						

							Basic Procedure for Storing Scan Files
• You can specify a password for each stored file. We recommend that you protect stored files fromunauthorized access by specifying passwords.
• Scan file stored in the machine may be lost if some kind of failure occurs. We advise against using the hard disk to store important files. The supplier shall not be responsible for any damage that may
result from the loss of files.
1. Display the initial scanner screen.
• When using the standard operation panel Press the [Home] key on the top left of the control panel, and press the [Scanner] icon on the
[Home] screen.
• When using the Smart Operation Panel
Press the [Home] key on the top left of the control panel. Flick the screen to the left, and then
press the [Scanner] icon on the Home screen 4.
2. Make sure that no previous settings remain.
If a previous setting remains, press the [Reset] key.
3. Place originals.
Basic Procedure for Storing Scan Files
131 CXX002   
						

							4.Press [Store File].
5.Press [Store to HDD].
6. If necessary, specify the stored file's information, such as [User Name], [File Name],
[Password], and [Select Folder].
• User Name Press [User Name], and then select a user name. To specify an unregistered user name, press
[Manual Entry], and then enter the name. After specifying a user name, press [OK].
• File Name Press [File Name], enter a file name, and then press [OK].
• Password Press [Password], enter a password, and then press [OK]. Re-enter the password for
confirmation, and then press [OK].
• Select Folder Specify the folder in which to save the stored files.
7. Press [OK].
8. If necessary, press [Scan Settings] to specify scanner settings such as resolution and scan
size.
9. Press the [Start] key.
Checking a Stored File Selected from the List
This section explains how to preview a file selected from the list of stored files.
6. Scan
132  
						

							1.Press [Select Stored File].
2.Specify the folder in which to save the stored files.
3. From the list of stored files, select the file you want to check.
You can select more than one file.
4. Press [Preview].
Basic Procedure for Storing Scan Files
133  
						

							Specifying the File Type
This section explains the procedure for specifying the file type of a file you want to send.
File types can be specified when sending files by e-mail or Scan to Folder, sending stored files by e-mail
or Scan to Folder, and saving files on a memory storage device.
You can select one of the following file types: • Single Page: [TIFF / JPEG], [PDF] If you select a single-page file type when scanning multiple originals, one file is created for each
single page and the number of files sent is the same as the number of pages scanned.
• Multi-page: [TIFF], [PDF] If you select a multi-page file type when scan multiple originals, scanned pages are combined and
sent as a single file.
Selectable file types differ depending on the scan settings and other conditions. For details about
file types, see "Notes About and Limitations of File Types", Scan.
1. Press [Send File Type / Name].
2.Select a file type.
If the File Type is set to [PDF], configure PDF File Setting as required.
3. Press [OK].
6. Scan
134  
						

							Specifying Scan Settings1. Press [Scan Settings].
2.Specify resolution, scan size, and other settings, as required.
3.Press [OK].
Specifying Scan Settings
135  
						

							6. Scan
136  
						

							7. Document Server
This chapter describes frequently used Document Server functions and operations. For the informationnot included in this chapter, see Copy/ Document Server on the supplied CD-ROM.
Storing Data This section describes the procedure for storing documents on the Document Server.
• A document accessed with a correct password remains selected even after operations are complete, and it can be accessed by other users. After the operation, be sure to press the [Reset]
key to cancel the document selection.
• The user name registered to a stored document in the Document Server is to identify the document creator and type. It is not to protect confidential documents from others.
• When turning on the fax transmission or scanning by the scanner, make sure that all other operations are ended.
File Name
A file name such as "COPY0001" and "COPY0002" is automatically attached to the scanned
document. You can change the file name.
User Name
You can register a user name to identify the user or user group that stored the documents. To assign
it, select the user name registered in the Address Book, or enter the name directly. Depending on
the security setting, [Access Privileges] may appear instead of [User Name].
For details about the Address Book, see "Registering Addresses and Users for Facsimile/Scanner Functions", Connecting the Machine/ System Settings.
Password
To prevent unauthorized printing, you can specify a password for any stored document. A
protected document can only be accessed if its password is entered. If a password is specified for
the documents, the lock icon appears on the left side of the file name.
137   
						

							1.Press the [Home] key on the top left of the control panel, and press the [Document Server]
icon on the screen.
2. Press [To Scanning Screen].
3. Press [Target Fldr. to Store].
4. Specify a folder in which to store the document, and then press [OK].
5. Press [User Name].
6. Specify a user name, and then press [OK].
The user names shown are names that were registered in the Address Book. To specify a name not shown in the screen, press [Manual Entry], and then enter a user name.
7. Press [File Name].
8. Enter a file name, and then press [OK].
9. Press [Password].
10. Enter a password with the number keys, and then press [OK].
You can use four to eight digits for the password.
11. For double-check, enter the password again, and then press [OK].
12. Place the original.
13. Specify the original scanning conditions.
14. Press the [Start] key.
The original is scanned. The document is saved in the Document Server.
After scanning, a list of folders will be displayed. If the list does not appear, press [Finish Scanning].
7. Document Server
138CXX002