Ricoh Mp 6002 User Guide

Messages during Direct print from a removable memory deviceMessageCausesSolutions"Cannot display files from
the selected memory
device."The memory device used
cannot be recognized.For details about the recommended
memory devices for the Direct printing
function from removable memory
devices, contact your service
representative. The USB flash memory
that features password protection or
other security features may not work
normally."The size of the selected
file(s) is too large."• The size...

Other messages
This section describes likely causes of and possible solutions for the error messages that are printed on
the error logs or reports.
MessageCausesSolutions"84: Error"There is no work area
available for image
processing.• In [Printer Features], under [System], set [Memory Usage] to
[Font Priority].
• Decrease the number of files sent to the machine."85: Error"The specified graphics
library is unavailable.• In [Printer Features], under [System], set [Memory Usage] to
[Font...

MessageCausesSolutions"An error occurred while
processing an Unauthorized
Copy Prevention job. The
job was cancelled."You tried to store a file in the
Document Server when the
[Unauthorized Copy
Prevention] was specified.On the printer driver, select a job type
other than [Document Server] in the
"Job Type:" or deselect [Unauthorized
Copy Prevention]."An error occurred while
processing an Unauthorized
Copy Prevention job. The
job was cancelled."The [Enter User Text:] field
on the...

MessageCausesSolutions"Collate has been
cancelled."Collate was canceled.Turn off the main power switch, and
then back on again. If the message
appears again, contact your service
representative."Command Error"An RPCS command error
occurred.Check using the following procedure:
• Check if the communication between the computer and the
machine is working correctly.
• Check if the correct printer driver is being used.
• Check if the machine's memory size is set correctly in the printer...

MessageCausesSolutions"Duplex has been
cancelled."Duplex printing was
canceled.• Select the proper paper size for the duplex function. For details
about paper, see "Specifications
for the Main Unit", Maintenance
and Specifications
.
• Change the setting for "Apply Duplex" in [System Settings] to
enable duplex printing for the
paper tray. For details about
setting the "Apply Duplex", see
"Tray Paper Settings", Connecting
the Machine/ System Settings
.
"Error has...

MessageCausesSolutions"Exceeded max. number of
pages of Document Server.
Cannot store."The maximum page
capacity of the Document
Server was exceeded.Delete some of the files stored in the
Document Server or reduce the number
of pages that you want to send."Exceeded max. number of
pages to print for
temporary / stored jobs."While printing a Sample
Print, Locked Print, Hold
Print, or Stored Print file, the
maximum page capacity
was exceeded.Delete unneeded files stored in the
machine....

MessageCausesSolutions"HDD is full."The hard disk became full
while printing a Sample
Print, Locked Print, Hold
Print, or Stored Print file.Delete unneeded files stored in the
machine.
Alternatively, reduce the data size of
the Sample Print, Locked Print, Hold
Print, or Stored Print file."HDD is full."When printing with the
PostScript 3 printer driver,
the hard disk capacity for
fonts and forms has been
exceeded.Delete unneeded forms or fonts
registered in the machine."HDD is full....

MessageCausesSolutions"Insufficient Memory"A memory allocation error
occurred.In [Printer Features], under [System],
set [Memory Usage] to [Font Priority].
PCL 5e
Select a lower resolution on the
printer driver. For details about
how to change the resolution
setting, see the printer driver Help.
PCL 6
• Select a lower resolution onthe printer driver. For detailsabout how to change the
resolution setting, see the
printer driver Help.
• On the printer driver's [Detailed Settings] tab, click...

MessageCausesSolutions"Output tray has been
changed."The output tray was
changed because the paper
size of the specified output
tray is limited.Specify the proper output tray."Print overrun."Images were discarded
while printing.In [Printer Features], under [System],
set [Memory Usage] to [Frame
Priority].
PCL 5e
Select a lower resolution on the
printer driver. For details about
how to change the resolution
setting, see the printer driver Help.
PCL 6
Select a lower resolution on the...

MessageCausesSolutions"Sending data failed."The machine received a
command to stop
transmission from the printer
driver.Check if the computer is working
correctly."Staple has been cancelled."Stapling printing was
canceled.Check the paper orientation, paper
quantity, print orientation, and staple
position. Certain settings can produce
print results that might not be as
expected."The print job has been
cancelled because capture
file(s) could not be stored:
Exceeded max. memory."The...