Ricoh Mp 6002 User Guide

MessageCausesSolutions"You do not have a privilege
to use this function. This
operation has been
cancelled."The logged in user does not
have the privileges to
register programs or change
the paper tray settings.For details about how to set
permissions, see Security Guide
.
Messages during Direct print from a removable memory deviceMessageCausesSolutions"99: Error"This data cannot be printed.
The specified data is either
corrupt or not supported by
the Direct printing function
from...

MessageCausesSolutions"Cannot communicate with
PC. Contact the
administrator."WSD (Device) protocol or
WSD (Scanner) protocol is
disabled.For details about how to enable or
disable the WSD protocol, see Security
Guide
.
"Cannot detect original size.
Select scan size."The original placed on the
exposure glass is a
nonstandard size.• Place the original correctly.
• Specify the scan size.
• When placing an original directly on the exposure glass, the lifting/
lowering action of the ADF...

MessageCausesSolutions"Cannot start scanning
because communication was
failed."The [Take no action] setting
has been selected on the
client computer, forcing the
client computer to remain
inactive when it receives
scan data.Open scanner properties, click the
[Events] tab, and then select [Start this
program] as the computer's response
on receipt of scan data. For details, see
your operating system's Help."Cannot start scanning.
Check the setting(s) on the
PC."The Scan Profile...

MessageCausesSolutions"Captured file exceeded
max. number of pages per
file. Cannot send the
scanned data."The maximum number of
pages per file has been
exceeded.Reduce the number of pages in the
transmitted file, and then resend the
file. For details about the maximum
number of pages per file, see "Storage
Function", Scan
.
"Connection with LDAP
server has failed. Check the
server status."A network error has
occurred and connection
has failed. Try the operation
once more.• Try...

MessageCausesSolutions"Exceeded max. E-mail size.
Sending E-mail has been
cancelled. Check [Max. E-
mail Size] in Scanner
Features."The file size per page has
reached the maximum e-
mail size specified in
[Scanner Features].Change the facsimile features settings
as follows:
• Increase the e-mail size limit in [Max. E-mail Size].
• Change the [Divide & Send E- mail] setting to [Yes (per Page)] or
[Yes (per Max. Size)]. For details
about these settings, see "Send
Settings", Scan
....

MessageCausesSolutions"Exceeded max. number of
alphanumeric characters."The maximum enterable
number of alphanumeric
characters has been
exceeded.Check the maximum number of
characters which can be entered, and
then enter it again. For details about
the maximum enterable number of
characters, see "Values of Various Set
Items for Transmission/Storage /
Delivery Function", Scan
.
"Exceeded max. number of
files which can be sent at the
same time. Reduce the
number of the selected...

MessageCausesSolutions"Exceeded max. page
capacity per file. Press
[Write] to write the scanned
data to the memory storage
device, or press [Cancel] to
delete."The scan could not be
completed because the
maximum number of pages
that can be scanned by this
machine was exceeded
during writing to the memory
device.Reduce the number of documents to be written to the memory device, and then
try again."Exceeded maximum
number of file to store.
Delete all unnecessary files."Too many files are...

MessageCausesSolutions"Memory is full. Do you
want to store scanned file?"Because there is not enough
free hard disk space in the
machine for storing in the
Document Server, only some
of the pages could be
scanned.Specify whether to use the data or not."Memory is full. Press [Write]
to write the current scanned
data to the memory storage
device, or press [Cancel] to
delete."The scan could not be
completed because there
was insufficient hard disk
memory at the time of saving
to the memory...

MessageCausesSolutions"Original(s) is being
scanned for a different
function."A function of the machine
other than the Scanner
function is being used such
as the Copier function.Cancel the job that is being processed.
For example, press [Exit], and then
press the [Home] key. Next, press the
[Copier] icon on the [Home] screen,
and then press the [Stop] key. When
the message "The Stop key has been
pressed, copying, and also other print
jobs that were being processed and
which could be stopped,...

MessageCausesSolutions"Selected file is currently in
use. Password cannot be
changed."You cannot change the
password of a file whose
status is "Waiting..." or that is
being edited with
DeskTopBinder.Cancel transmission ("Waiting..." status
cleared) or the DeskTopBinder setting,
and then change the password."Selected file is currently in
use. User name cannot be
changed."You cannot change the
sender's name whose status
is "Waiting..." or that is
being edited...