Projector Christie Rpmsp D180u User Manual

Section 4: Advanced Configuration and Controls
RPMSP-D132U & RPMSP-D180U User Manual User Manual4-3020-100245-03  Rev. 1  (11-2010)
4.7 Communications 
Settings in the Communications submenu define and control how single or multiple projectors can link with 
each other and with a controlling device.
FIGURE 4-3 COMMUNICATIONS SUBMENU
4.7.1 Baud Rates
The baud rate setting determines the speed of communication to and from the projector on the RS-232 or RS-
422 links. Set the baud rate to match that of your...

4-4RPMSP-D132U & RPMSP-D180U User Manual User Manual020-100245-03  Rev. 1   (11-2010)
Section 4: Advanced Configuration and Controls
 key in 3.2, Using the Keypads). If you make a mistake in assigning or changing the projector number, 
press   to cancel.
4.7.3 Network Routing
NOTE: Not applicable for stand-alone projectors or simple serial networks with only one type of controller and 
linking.
FIGURE 4-4 NETWORK ROUTING OPTIONS
.
FIGURE 4-5 USING “NETWORK ROUTING” OPTIONS
SEPARATESelect “Separate”...

Section 4: Advanced Configuration and Controls
RPMSP-D132U & RPMSP-D180U User Manual User Manual4-5020-100245-03  Rev. 1  (11-2010)
4.7.4 Ethernet Settings (Submenu)
NOTE: Recommended for network administrators only.
DHCP
 Enable this checkbox if you want a DHCP server to automatically assign an IP address that is valid and unique 
for use on the current Ethernet network. On networks without a DHCP server, or to override the automatic 
DHCP server function, delete the checkmark and enter the new “IP...

4-6RPMSP-D132U & RPMSP-D180U User Manual User Manual020-100245-03  Rev. 1   (11-2010)
Section 4: Advanced Configuration and Controls
4.7.5 Broadcast Key
Enter a checkmark for keypad commands sent to any one projector to be relayed to all projectors in a serial 
network. The   key will temporarily “override” the effect of a broadcast setting and allow you to control a 
specific projector when necessary. Remove the Broadcast Key checkmark when operating redundant networks.
4.7.6 Front IR Protocol
This...

Section 4: Advanced Configuration and Controls
RPMSP-D132U & RPMSP-D180U User Manual User Manual4-7020-100245-03  Rev. 1  (11-2010)
4.7.7 Wired Keypad Protocol
Select “On” to enable use of a wired remote keypad connected to the rear of the projector. The projector will 
then respond to incoming commands from either port. To disable the wired keypad, use a different keypad (the 
built-in or an IR remote keypad) to select “off”. This safeguard prevents you from accidentally disabling the 
wired keypad...

4-8RPMSP-D132U & RPMSP-D180U User Manual User Manual020-100245-03  Rev. 1   (11-2010)
Section 4: Advanced Configuration and Controls
4.8.3 Brightness Uniformity — Submenu
FIGURE 4-8 BRIGHTNESS UNIFORMITY SUBMENU
Provides refinement of displays already matched for their primary colors and overall light output. Use to create 
a smooth image in which no area appears brighter or more red, green or blue than another. 
Enable the “Uniformity Enable” checkbox to access a multitude of adjustments for critical...

Section 4: Advanced Configuration and Controls
RPMSP-D132U & RPMSP-D180U User Manual User Manual4-9020-100245-03  Rev. 1  (11-2010)
FIGURE 4-10 COLOR PERFORMANCE CHOICES
The projector can utilize any of the 3 pre-defined color performance settings identified in Figure 3.42 
(default=User 1), or colors can be driven on the basis of color temperature. For most applications, one of these 
options will produce accurate and realistic colors from a variety of sources. They can be applied at any time in 
the...

4-10RPMSP-D132U & RPMSP-D180U User Manual User Manual020-100245-03  Rev. 1   (11-2010)
Section 4: Advanced Configuration and Controls
Color Adjustment by X,Y
Use this submenu to alter, add or copy a color gamut (i.e., “color adjustment”). Controls in this menu define the 
precise hue of each primary color component (red, green, blue, and white) used to generate the millions of 
colors produced in displays. The x/y coordinates for each color define its location on the standard CIE 
chromaticity graph (see...

Section 4: Advanced Configuration and Controls
RPMSP-D132U & RPMSP-D180U User Manual User Manual4-11020-100245-03  Rev. 1  (11-2010)
Adjust the hue of each primary color (red, green, blue, and white) by using more or less of it in relation to the 
other colors.
FIGURE 4-13 CUSTOMIZE COLOR
See 4.13 Using Multiple Projectors for Using Color Saturation procedure.
4.9 Diagnostics / Calibration 
FIGURE 4-14 DIAGNOSTICS AND CALIBRATION SUBMENU
4.9.1 Test Pattern
Choose the desired internal test pattern to...

4-12RPMSP-D132U & RPMSP-D180U User Manual User Manual020-100245-03  Rev. 1   (11-2010)
Section 4: Advanced Configuration and Controls
4.9.4 Color Enable
Select which color or colors you want to see. This is useful while working with color temperature, input levels 
or other special setup parameters. Colors can also be enabled or disabled by entering the corresponding 
function code listed on the back of the standard remote keypad.
4.9.5 Odd Pixel Adjustment
NOTE: Factory-set and rarely required by user....