Projector Christie Rpmsp D180u User Manual

Section 3: Operation
RPMX/RPMSP-D132U & RPMSP-D180U User Manual3-7020-100245-03 Rev. 1 (11-2010)
Channel 
Select a source setup (channel) defined and stored in projector memory. Enter a 2-digit channel number, the 
display will automatically update according to the setup parameters defined for that channel. A new channel is 
automatically created if you adjust an image from a new source.
NOTE: To display a list of available channels for selection make sure the Display Channel List option is 
enabled in...

3-8RPMX/RPMSP-D132U & RPMSP-D180U User Manual020-100245-03 Rev. 1 (11-2010)
Section 3: Operation
Brightness 
Increases or decreases the amount of black in the image. Use   keys until you reach the required level 
of contrast. For best results, start high and decrease so that dark areas do not become black (“crushed”). 
Conversely, overly high brightness changes black to dark gray, causing washed-out images. See 3.5 Adjusting 
the Image.
Gamma 
“Gamma” determines how gray shades are displayed between...

Section 3: Operation
RPMX/RPMSP-D132U & RPMSP-D180U User Manual3-9020-100245-03 Rev. 1 (11-2010)
Function Key
WITHIN A MENU: Using the   for special tasks within the menu system is noted with the appropriate topic 
elsewhere in Section 3. For example, press   in the Channel Setup menu to enable deletion or copying of a 
channel.
WITHIN A PRESENTATION: Press 
 followed by a 2-digit number to enable a 
specific color or colors in the display (see right). For example,  will 
display only red and green data,...

3-10RPMX/RPMSP-D132U & RPMSP-D180U User Manual020-100245-03 Rev. 1 (11-2010)
Section 3: Operation
Arrow Keys
Use the   keys to change a slidebar value or to select a different option within a drop-down list 
without having to first scroll through options. See also Editing Text later in Section 3.
Use the   keys to navigate within a menu, drop-down list or text box. 
Lens Focus, Zoom and Lens H, Lens V ,,, 
NOTE: Not applicable.
Laser 
Activates the laser pointer on the remote. Keep the key depressed and...

Section 3: Operation
RPMX/RPMSP-D132U & RPMSP-D180U User Manual3-11020-100245-03 Rev. 1 (11-2010)
Press the number corresponding to the function menu, such as 
 for the Image Settings menu, or use the 
 keys
 on any keypad to highlight the option, then press  . The corresponding function menu or 
drop-down list of further options will appear.
Longer menus have a scroll bar on the right. Use the arrow keys to scroll the menu. Locked or disabled items 
appear dimmed and cannot be selected.
NOTES:1) If...

3-12RPMX/RPMSP-D132U & RPMSP-D180U User Manual020-100245-03 Rev. 1 (11-2010)
Section 3: Operation
Using Slidebars and Other Controls
Most function menus allow you to change settings by using slidebars, checkboxes, and drop-down lists. To 
select a slidebar, toggle a checkbox status or view a drop-down list, do one of the following within the function 
menu: 
• Enter the menu option number corresponding to the setting you wish to change (for example, press 
 
to select Vertical Stretch in the Size &...

Section 3: Operation
RPMX/RPMSP-D132U & RPMSP-D180U User Manual3-13020-100245-03 Rev. 1 (11-2010)
Use 
 or   keys to navigate up and down the list (the current choice is noted with a small ). Press   
to choose the highlighted option from the list.
Example of Drop-Down List
To scroll through a list without first pulling it down, highlight the option and use  . Press 
 when the 
choice appears.
NOTES: 1) Press 
 or   to jump between pages in an extra long drop-down list. 
2) Press   while in a drop-down...

3-14RPMX/RPMSP-D132U & RPMSP-D180U User Manual020-100245-03 Rev. 1 (11-2010)
Section 3: Operation
FIGURE 3-10 ADDING OR DELETING CHARACTERS
To accept edits and leave the edit window, press  (Enter). 
NOTES: 
1) Press 
 at any time to cancel changes and return to the previously-defined text.
2) Once you enter the first digit, this digit replaces all old digits.
3) Pressing any non-numbered key will accept the number entered up to that point as the new value. 
4) Press 
 to cancel editing of numerical...

Section 3: Operation
RPMX/RPMSP-D132U & RPMSP-D180U User Manual3-15020-100245-03 Rev. 1 (11-2010)
If more than one channel exists for the input, the image will be displayed according to the setup parameters 
for the first channel with matching characteristics.
FIGURE 3-11 CHANNEL LIST
Channel
A channel is a collection of measurements, locations and settings that tailor the display of a signal to your 
specific needs. Since source types and applications vary, you must adjust and define parameters, such as...

3-16RPMX/RPMSP-D132U & RPMSP-D180U User Manual020-100245-03 Rev. 1 (11-2010)
Section 3: Operation
FIGURE 3-12 SELECTING A CHANNEL
3.4.3 Using a Channel
Select a channel at any time by pressing   (see right). To prevent a channel from appearing in this list, edit 
the channel as described in Channel Edit later in this section. 
NOTE: The current channel is highlighted upon entering the channel list, or, if this channel is not displayed 
here, the first channel in the list is highlighted.
Defined Channels...