Panasonic Video Multiplexer Wj Fs616c Operating Instructions

21
Spot and Multiscreen Monitor
The WJ-FS616C video multiplexer can be connected to
two monitors.
The monitor displays the video signal according to the
connection made, as shown below.
Spot Monitor:The monitor that is connected to the
SPOT OUT connector on the rear of the video multi-
plexer.
It only displays the camera input in single spot or
single sequence.
Displaying the VCR playback is disabled.
Multiscreen Monitor:The monitor that is connected to
the MULTISCREEN OUT connector on the rear of
the...

22
Connection with the Time Lapse VCR
Connect the time lapse VCR as shown in the example below.
19
201
ALARM/REMOTE
37
CAMERA
SW  INREC  OUT PLAY   IN
VIDEO S–VIDEO S–VIDEO VIDEO
VIDEO IN
CAMERA
SW  OUTGND
S-VIDEO
AUDIOVIDEO OUT
12345678910111213141516
8 9
28 26
13 4 7 16
1234
ALARM
IN
COMALARM
RESET INALARMRECOVER OUT
5678
ALARM
OUT
1 SHOT IN
TAPE END
OUT
9101112
WARNING
OUT
HUMID OUT
REC REVIEWOUT
13141516
SERIES
REC IN
TIME
ADJUST INTIMEADJUST OUT
COMREC OUT
SERIES
REC OUT
Video Multiplexer...

23
SETUP PROCEDURES 

24
SETUP MENU
The setup menu provides a way for controlling functions
that are not available by a direct operation.
Displaying the SETUP MENU
To display the setup menu follow the procedure below.
1. Confirm that the camera and peripherals are connected
correctly and securely and all components are turned
on.
2. Press the [SET UP/ESC] button for 2 seconds or more. 
The WJ-FS616C SETUP MENU appears on the screen
of the spot and multiscreen monitors as shown in the
figure.
The following buttons are valid...

25
Programming Setup Menu
As shown below, the SETUP MENU has nine main submenus: Alarm Setup, Multiscreen Output Setup, Spot Output Setup,
Record Output Setup, Multiscreen 2 Output Setup, System Setup, Camera Download, Camera Upload and All Reset.
Six of these submenus; Alarm Setup, Multiscreen Output Setup, Spot Output Setup, Record Output Setup, Multiscreen 2
Output Setup and System Setup are further divided into additional submenus.
The (❋) mark indicates that the item has a submenu for more detailed...

26
4. To clear all alarm records, press the Aor Bbutton to
select CLEAR where the cursor is positioned, then
press the [HOME/SET] button.
5. Press the [SET UP/ESC] button to return to the previous
ALARM SETUP menu.
Alarm Schedule
This item lets you enable or disable the system alarm func-
tion.
1. Move the cursor to the ALM SCHEDULE parameter by
pressing the Cor Dbutton. 
2. Select ON or OFF by pressing the Aor Bbutton.
ON:Enables system alarm function.
OFF:Disables system alarm function.
The factory...

27
Camera Site Alarm
This item lets you enable or disable the camera site alarm
function.
1. Move the cursor to the CAM SITE ALM parameter by
pressing the Cor Dbutton.
2 Select ON or OFF by pressing the Aor Bbutton.
ON:Enables camera site alarm function.
OFF:Disables camera site alarm function.
The factory default setting is OFF.
Note:To use this function, the WV-PB6164 Data
Multiplex Boards must be installed in the video mul-
tiplexer.
Video Loss Alarm
This item lets you enable or disable the alarm...

28
Alarm Mode on the Multiscreen
Monitor
This item lets you select the mode for displaying an alarm
on the multiscreen monitor.
1. Move the cursor to the ALM MODE-MLT parameter.
2. Select the desired mode.
ALM-LINK:Switches screen to the camera image of
the corresponding channel with an alarm title super-
imposed.
ALM-IND:Retains the camera image currently select-
ed.
An alarm title appears overlapped on the camera
image.
If no camera is currently selected the alarm title
does not appear.
The factory...

29
Clock Display 
This item lets you enable or disable the clock display on the
multiscreen monitor.
1. Move the cursor to the CLOCK DISPLAY parameter.
2. Select either ON or OFF.
ON:Enables clock display on the monitor screen.
OFF:Disables clock display on the monitor screen.
The factory default setting is ON.
Still Display
This item lets you enable or disable display of the subtitle
“STILL” on the multiscreen monitor when the image is in the
freeze mode.
1. Move the cursor to the STILL DISPLAY...

30
Secret View
When the camera image is displayed in the spot mode on
the spot monitor, the multiscreen monitor is enabled to skip
the step in sequence or display a blackout in multiscreen
for that selected channel image.
This function is called Secret View and the item lets you
enable or disable this function on the multiscreen monitor.
1. Move the cursor to the SECRET VIEW parameter.
2. Select either ON or OFF. 
OFF:Disables the secret view function.
ON:Enables the secret view function.
The factory...