Panasonic Video Multiplexer Wj Fs616c Operating Instructions

51
2. Press the [STILL] button. The indicator in the button
lights.
3. Select an image to be frozen on the monitor by press-
ing a [1 – 16] button.
The indicator in the selected button start blink and the
camera image corresponding to the button is displayed
in freeze on the monitor screen.
Note:You can apply this function to multiple images on
the monitor screen
4. Press the blinking CAMERA button to cancel the freeze
function individually. 
5. Press the [STILL] button to return to the normal camera...

52
Single Spot (Playback)
1. Select an image to be displayed on the monitor by
pressing a [1 – 16] button.
The indicator in the selected button lights and the play-
back image corresponding to the button appears on
the monitor screen.
Note:While playing back a videotape recorded in quad
images, the corresponding 4-segment image is dis-
played, if the selected number is recorded as part
of the quad image.
For instance, if #5 is selected, the quad image of
“5-6-7-8” is displayed.
2. To select another...

53
Zooming Single Spot (Playback)
While the image on the monitor screen is displayed in sin-
gle spot mode, the image can be zoomed followed the pro-
cedure below.
1. Select an image to be zoomed on the monitor by press-
ing a [1 – 16] button.
The indicator in the selected button lights and the cam-
era image corresponding to the button appears on the
monitor screen.
2. Press the [EL-ZOOM] button to display the zoomed
image on the monitor.
The indicator in the button lights to indicate zoom mode
is...

54
3. Press the [FUNCTION] button. The indicator in the but-
ton starts to blink.
4. Select the playback channel you want to display by
pressing the corresponding [1 – 16] button.
The indicator in the [FUNCTION] button lights, and the
selected playback image is displayed in the upper left
segment of the multiscreen.
5. To display another playback image, press the [FUNC-
TION] button.
The indicator in the button starts to blink.
Select the channel you want to display by pressing the
corresponding [1 – 16]...

55
Freezing Multiscreen Spot 
(Live Images with a Playback Image)
The monitor can display the freeze camera images on a 4-,
7-, 10- or 13-segment multiscreen while cameras with play-
back images are displayed.
1. Repeat steps 1 to 4 referring the procedure in the
Multiscreen Spot.
2. Press the [STILL] button. The indicator in the button
lights.
3. Select a camera image to be frozen on the monitor by
pressing a [1 – 16] button.
The indicator in the selected button start blink and the
playback image...

56
The camera control is only available while the camera
image is displayed in single spot on the selected monitor
screen and the LOCK switch is in OFF position.
Camera Selection
1. Select an either spot or multiscreen monitor by pressing
the [SPOT] or [MULTISCREEN] button.
The indicator in the selected button is on.
2. Select the live camera mode (indicator off) by pressing
the [VCR/CAM] button.
3. Select a camera image you want control by pressing a
[1 – 16] button
The indicator in the selected button...

57
Pan/Tilt Control (Preset Operation)
The following function requires the use of cameras
equipped with the specific feature.
Note:Select only preset position numbers 1 to 16.
1. Select the desired monitor and camera referring to the
Camera Selection procedure described above.
2. Press the [PRE-POSI] button.
3. Select the preset position number by pressing the [1 –
16] button to move the pan/tilt head to the preset posi-
tion on the active monitor.
Note:Select a number from 1 through 16. (“17” is not...

58
7. Press the [SET UP/ESC] button, while holding the
[FUNCTION] button, to exit from the setup mode or
menu.
Note:Refer to the operating instructions of the selected
camera for further details.
Caution:Camera addresses are important for RS-485
type cameras.
• Do not use addresses  other than 1 through 16
for individual cameras. (“17” is not allowed)
• Do not set a single address for more than one
camera in an RS-485 chain.
•Simplified preset position setting
The preset position can be set by a...

59
Alarm Operation
When an alarm signal is received, the multiplexer, the
Record Output, Spot Output and Multiscreen Output of the
multiplexer are activated as shown below.
Refer to the ALARM SETUP menu of the WJ-FS616C SETUP
MENU for further settings.
Front Panel Display
When an alarm function is activated, the ALARM Indicator
(Red) and the corresponding CAMERA (1 – 16) button
(Green) blink.
The Alarm Output signal is supplied to pin 9 of the ALARM/
REMOTE port for the programmed duration.
After the...

60
Multiscreen Output
The alarmed input image and alarm display are displayed
on the multiscreen monitor as shown below.
Described below are several examples; the selected mode
varies, depending on the menu setting.
•Alarm Link Mode
• The image of the alarmed camera is displayed in
single spot mode on the monitor.
The indicator in the corresponding CAMERA button
blinks.
• When multiple alarms are activated, the images of
the alarmed cameras are displayed on a quad
screen in the order of upper left to...