Panasonic Video Multiplexer Wj Fs616c Operating Instructions

Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
Model No.WJ-FS616C
Video Multiplexer
Operating Instructions
LOCKMULTI
SCREENMULTI SCREENSELECT
SEQUENCET
ALARM
RESETSPOT
VCR
CAM POWER
ON
OFF
1
2
3
4
5
6
7
8
9
10
11
12
16 15 14 13
CAMERA/PRE SET POSITION
PUSH OPEN
Digital Video Multiplexer WJ-FS616C 

2
The serial number of this product may be found on the bot-
tom of the unit.
You should note the serial number of this unit in the space
provided and retain this book as a permanent record of your
purchase to aid identification in the event of theft.
Model No. WJ-FS616C
Serial No.
Caution:
Before attempting to connect or operate this product,
please read the label on the bottom.
NOTE: This equipment has been tested and found to com-
ply with the limits for a Class A digital device, pursuant to
Part 15...

3
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturers instructions.
8) Do not use near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9) Do not defeat the safety purpose of the polarized or...

4
IMPORTANT SAFETY INSTRUCTIONS  ............................ 3
PREFACE .......................................................................... 5
FEATURES ........................................................................ 5
PRECAUTIONS ................................................................. 6
MAJOR OPERATING CONTROLS AND 
THEIR FUNCTIONS  .......................................................... 7
Front View  .................................................................. 7
Rear...

5
PREFACE
The WJ-FS616C Video Multiplexer is designed to multiplex
the field signals from video cameras and record the camera
images on a time lapse VCR.
Up to 16 cameras can be connected to the unit for monitor-
ing images in multiscreen, sequence, freeze or electronic
zoom mode on a video monitor screen.The WJ-FS616C Video Multiplexer allows you to control
camera functions such as lens focussing, zooming, and iris,
positioning of the pan/tilt head, etc. This makes the system
highly flexible and...

6
PRECAUTIONS
• Refer all work related to the installation of this
product to qualified service personnel or system
installers.
• Do not block the ventilation opening or slots on the
cover.
To prevent the appliance from overheating, place it at
least 5 cm (2 inches) away from the wall.
• Do not drop metallic parts through slots. 
This could permanently damage the appliance. Turn
the power off immediately and contact qualified service
personnel for service.
• Do not attempt to disassemble the appliance....

7
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
Front View
FUNCTION
PRE-POSILEFT
RIGHT
AUTO UP
DOWN
HOME/SET
EL-ZOOMSTILL
 CURSOR / CAMERA   CONTOROLCLOSEOPENIRIS
NEAR FARFOCUS
TELEWIDEZOOM
LOCKOFF ONSET  UP/ESC
VCR   CONTROL
T/L MODE//
4
8
12
16
3
7
11
15
2
6
10
14
1
5
9
13
PUSH   OPEN
16
POWERLOCK
ON
OFFALARMMULTI
SCREEN
MULTISCREENSELECT
RESET SPOT SEQUENCE
VCR
CAMCAMERA/PRESET   POSITION
Digital Video Multiplexer  WJ-FS           C
qw ertyui o !1
!0
@1#1#2
@2
@3
@4@5@6@7@8@9#0#3
qPower Switch (POWER...

8
tSpot Monitor Button (SPOT)
This button is used to operate the spot monitor connect-
ed to the SPOT OUT connector on the rear of the video
multiplexer.
The indicator (Green) in the button lights to indicate that
the spot monitor is selected, and enables control of the
monitor.
yMultiscreen Monitor Button (MULTISCREEN)
This button is used to operate the multiscreen monitor
connected to the MULTISCREEN OUT connector on the
rear of the video multiplexer.
The indicator (Green) in the button lights to...

9
@6Direction Buttons (UP/DOWN/LEFT/RIGHT)
These buttons are used to manually operate the Pan/Tilt
Head, move the cursor position in the setup menu of
the video multiplexer, or to select an area for Electric
Zooming.
UP:Upward
DOWN:Downward
LEFT:Left
RIGHT:Right
@7Auto Button (AUTO)
This button is used to activate the auto panning function
if the camera is equipped with the specific future. 
@8Iris Buttons (IRIS, CLOSE/OPEN)
Close or open the lens iris of cameras equipped with
the specified lens.
When...

10
$1Camera Output Connectors (CAMERA OUT)
The video signal connected to the CAMERA IN connec-
tor is looped through to this connector with an automat-
ic 75 Ωtermination.
The camera control signal multiplexed on the video sig-
nal is not available at this connector. When the power
switch of the video multiplexer is turned off, no signal is
present at this connector.
$2
2Camera Input Connectors (CAMERA IN)
These connectors accept either a color or B/W compos-
ite video signal from the cameras. In...