Panasonic Uf 6000au Operating Instructions Manual

Sending Documents
61
Redialing
Basic Operations
NOTE1. While the unit is displaying WAIT TO DIAL, you can press   to start redialing 
immediately.
To redial the last dialed number through ADF
1
 Set document(s) face down.
EN TER  S TA TIO N( S)
TH EN  PR ES S S TA RT  00 %
2
   
ME MOR Y XM T=O N
1: OFF  2 :O N
3
 
EN TER  S TA TIO N
                        00 %
4
 
Your machine starts to dial the last dialed number.
PR ESS  S TA RT  TO  D IAL
55 512 34
* DIA LI NG  *    
55 512 34
89
1
REDIAL 

62
Receiving Documents
You can select one of the four modes as shown below.
NOTE1. Depending on the model of the Telephone Answering Machine (TAM) that is connected, some 
of the features may not be compatible with your fax machine operating in the TAM Interface 
mode.
2. If you are using the Distinctive Ring Service provided by your local telephone company, 
please note that the ring pattern for your fax number must match with the setting of Fax 
Parameter No. 36 (RING PATTERN DETECT).  (See page 38)
If...

Receiving Documents
63
Basic Operations
When your machine is set to this mode, your machine will not receive documents automatically. If you 
receive a fax call, follow the procedure below to receive documents manually.
Setting the Telephone Mode
Operation of Telephone Mode
NOTE1. This procedure is called REMOTE RCV and will only work on a touch tone phone.  If your 
extension phone is not a touch tone phone, press   on the control panel of your fax 
machine.
Telephone Mode
1
Cha nge Fa x Parameter No....

Receiving Documents
64
When your machine is set to this mode, your machine will switch to document reception or voice 
communication automatically.
Setting the Fax / Tel Auto Switching Mode
Operation of Fax / Tel Auto Switching Mode
NOTE1. The length of time the machine signals can be changed by Fax Parameter No.18 (OP CALL 
TIMER)  (See page 37).
2. To adjust the Ringer Volume refer to page 25.
Fax / Tel Auto Switching Mode
1
Change  Fa x Parameter No. 17 (RECEIVE MODE) to 3: Fax / Tel SW.  
(See page...

Receiving Documents
65
Basic Operations
When your machine is set to this mode, it will immediately begin to receive documents automatically when a 
call is received.
Setting the Fax Mode
Operation of Fax Mode
Your machine will begin receiving automatically when a fax call is received.
Your machine is equipped with a unique feature called TAM Interface which enables it to automatically 
switch a single telephone line either to Fax or TAM. You can connect most TAMs in the market to your 
machine and use...

Receiving Documents
66
TAM (Telephone Answering Machine) Interface Mode
Setting the TAM Interface Mode
Operation of TAM Interface Mode
1
Change Fax Parameter No. 17 (RECEIVE MODE) to 4: TAM / FAX.  
(See page 36)
If it is a Fax call,
1
Wh en you r TAM and Fax re ceives an incoming  call, the 
TAM always answers the call first and then the TAM plays 
the OGM (Outgoing Message) recorded in your TAM to 
the calling station. During the time the TAM is answering 
the call, your fax machine will be monitoring...

Receiving Documents
67
Basic Operations
This machine  can use Letter, Le gal or A4 size plain paper for recording.   Sometimes, oversized docu ments 
sent to you by the other parties cannot be printed within a single page.  When this occurs, the document will 
be divided into separate pages.
This machine is equipp ed with a  Print Redu ction function to  solve this problem.  You  may se lect the most 
appropriate setting from the selections described below.
1.Automatic Reduction
Each page of a received...

Receiving Documents
68
If the received document is extremely long (over 39% longer than the recording paper), the document will be 
divided into separate pages.  When printing on separate pages, the bottom 0.4 in (10 mm) of first page will 
be overlapped on top of the next page.
NOTE1. If the reduction method is set to the Automatic Reduction mode, the document is printed out 
with no reduction when printing out separate pages. If the reduction method is set to Fixed 
Reduction mode, the document is...

Receiving Documents
69
Basic Operations
If the recording paper runs out or jams or if the toner runs out during reception, the machine automatically 
starts receiving documents into its image data memory.  Stored documents are printed automatically after 
replacing the recording paper or the toner cartridge. (See Note 1 and 2)
The  printin g mechanism of the machine is a Reverse Ord er Stacking constructio n. The ma chine has Print 
Collation Mode that stacks received documents in the correct order. When...

70
Making Copies 
Your machine has a copy function which can make single or multiple copies.
NOTE1. The copy will be reduced automatically depending on the length of the original document. If 
you wish to be prompted for the reduction ratio when making copies, change the setting of Fax 
Parameter No. 32 (COPY REDUCTION) to Manual.   (See page 37)
If  Copy Reduction is  set to Manual,  press   and   to set  the zoom ratio  in 1% steps. (100% 
to 70%)
2. If you make a copy with Super Fine resolution, it...