Panasonic System Controller Wv Cu360c Operating Instructions

21
Camera Cleaning
This menu is for specifying the order in which combination
cameras connected to the system are cleaned.
The camera cleaning function causes cleaning of the built-
in slip rings that conduct electric signals while moving the
pan/tilt head.  All combination cameras connected to the
system are cleaned in the order specified here.  Picture
viewing is disabled during the cleaning process.
1. Display [CLEAn] and press the CAM/SET button. The
LED displays [no-01].
2. Use the numeric buttons...

22
Basic Operating Flow
The operation starts with a log-in procedure. It proceeds to system unit selection, monitor selection and camera selection.
Alarm operations for the system such as alarm reset, suspension may be implemented. The operation ends with a log-out pro-
cedure.
OPERATING PROCEDURES (PS•Data)
LOG IN
SYSTEM UNIT SELECTION
MONITOR SELECTION
LOG OUT
SYSTEM 
OPERATION
• Alarm Reset
• Alarm Suspend
• Alarm Suspend
Cancel
SYSTEM UNIT
OPERATION
• System Unit Setup
• System Function
• Alarm...

23
Login/Logout
Log In
Right after powering up, the controller will be operable with-
out password entry, provided user password certification is
set to Off in the setup menu.
When set to On, you will be prompted to enter your regis-
tered password.  The default password is “12345”, but you
need to remember the password assigned to you by your
system administrator.
1. Insert the DC plug into the DC 9 V IN jack and connect
the AC adapter to an AC outlet.
2. The controller number, software versions and...

24
Selecting with UNIT A/UNIT B Button
The unit numbers (01-99) of some frequently used units can
be assigned to numeric buttons 1-9 in the setup.  Units can
be divided in two groups, one assigned to the UNIT A and
the other to the UNIT B button.  A frequently used system
unit can be easily selected by pressing one numeric button
and then the UNIT A or UNIT B button.
1. Enter a single digit number (1-9). 
Omit this step when you wish to select unit number “1”,
as this unit is selected by default.
2....

25
Monitor Selection
A monitor is selected when multiple monitors are connected
to a system unit (e.g., a Video Multiplexer) to control such
functions as multiscreen display and electronic zoom.
1. Select the system unit connected to the monitor you
wish to control. 
2. Enter a monitor number using the numeric buttons.
3. Press the MON/ESCbutton.
The selected monitor number appears in the monitor
section of the LED display.
The selected camera number appears in the camera
section of the LED display.
The...

26
2. Press the ZOOM TELEbutton to optically bring the
object closer, or press the ZOOM WIDEbutton to opti-
cally widen the scene.
3. Press the IRIS CLOSEbutton to close the iris, or the
IRIS OPEN button to open the iris.
If the IRIS CLOSEand IRIS OPENbuttons are pressed
simultaneously, the iris is reset to the default.
Home/Preset Position 
The camera moves to the preset position or back to the
home position, and the picture of the camera in that posi-
tion appears on the monitor.
1. Press the...

27
Combination Camera Shortcuts
The shortcuts listed below are available for controlling combination cameras. For more details, refer to the Operating
Instructions included with the camera.
Selecting a PRESET position From #1 to #64
#1 [1] + [CAM FUNC]
#10 [1] + [0] + [CAM FUNC]
#64 [6] + [4] + [CAM FUNC]
AUTO PAN
ON [6] + [5] + [CAM FUNC]
OFF [6] + [6] + [CAM FUNC]
Speed Up [6] + [7] + [CAM FUNC]
Speed Down [6] + [8] + [CAM FUNC]
Setting Start Point [6] + [9] + [CAM FUNC]
Setting End Point [7] + [0] +...

28
Housing/AUX Control
When your system includes a camera housing, the
defroster and wiper equipped in it are controlled. When a
Receiver is installed in the system, an auxiliary device con-
nected to it such as a buzzer or lamp will be also con-
trolled.
8Defroster
Press the DEF/AUX 2button to enable or disable defroster
operation for the selected camera. The DEF/AUX 2indica-
tor next to the button is lit while it is in operation.
8Wiper
Press the WIPER/AUX 1button to enable or disable wiper
operation...

29
Video Multiplexer Control
Some of the major functions equipped in a Video
Multiplexer are remotely controlled from the System
Controller. For more information, refer to the manual includ-
ed with the Video Multiplexer. 
The operating procedures on the following pages assume
that you have selected a system unit and a monitor.
Multiscreen Selection
1. Press the MULTISCREEN SELECTbutton. The select-
ed multiscreen monitor displays a split screen.
2. Press the button repeatedly to select the number of...

30
Viewing Playback
VCR playback pictures are displayed on the selected spot
or multiscreen monitor.
1. With the connected VCR in playback mode, press the
VCR/CAMbutton to turn on the VCR indicator.
Playback pictures are displayed on the selected moni-
tor.
2. Press the VCR/CAMbutton again to cancel viewing
playback. The VCR indicator goes off.
Note:This function is automatic when PLAYBACK
AUTO is set to ON in the Video Multiplexer setup
and the playback signal is supplied to the Video
Multiplexer. Set...