Panasonic System Controller Wv Cu360c Operating Instructions

31
Digital Disk Recorder Control
A Digital Disk Recorder is controlled from the System Controller using shortcuts assigned to numeric buttons. 
For more information, refer to the manual included with the Digital Disk Recorder. 
The operating procedures on the following pages assume that you have selected a system unit and a monitor.
WJ-HD100 Shortcuts
The shortcuts listed below are available for controlling a digital disk recorder. For more details, refer to the Operating
Instructions included with the...

32
SETUP
FUNCTIONSHIFT
WJ-HD500A Shortcuts
The shortcuts listed below are available for controlling a digital disk recorder. For more details, refer to the Operating
Instructions included with the digital disk recorder.
DAYLIGHT SAVINGS
OFF, INT or EXT selectable
Operate LCD Button. Item WV-CU360CWJ-HD100 NoteDAYLIGHT
SAVINGS
SHIFT
SETUP
FUNCTION3 1
Timer REC Mode
Selection
SHIFT
SETUP
FUNCTION
Button Lock OFFOperate LCD Button. Operate LCD Button.
Button Lock ON
SHIFT
SETUP
FUNCTION31
SHIFT
SETUP...

33
Item Controller Operation Note
Screen Display ON/OFF
Group Selection
Show/Hide Alarm Log
Skip Playback FWD.
Skip Playback REW.
Record List 1 line Up
Record List 1 line Down
Record List Turn Next Page
Record List Turn Prev. Page
Playback of Selected Record
Backward Search in Window 
Forward Search in Window
Increment Parameter in Window
Decrement Parameter in Window
Search Window Display ON/OFF
Alarm Log 1 line Up
Alarm Log 1 line Down
Playback of Selected Alarm
Record
Backward Search in Window...

34
Item
Alarm Operation
When the WV-CU360C receives an alarm signal from a sys-
tem unit, the alarm indicator on the controller blinks.
The alarm indicator changes from blinking to steady light
when the alarm is automatically reset.
The camera number [---] appears in the camera section of
the LED display.
Alarm Reset
1. Press the ALM RESET/ALM RECALLbutton.
The alarm indicator on the controller goes off.
Notes:
• Alarm reset operations including auto reset are
applied to all system units, not to a...

35
REMOTE SETUP of UNITS & CAMERAS
You can set up the system unit and the camera with the
setup menu by this controller.
You can use the controller to set up system units and cam-
eras.
This section describes the main remote setup procedures.
Some of the descriptions may not be applicable if they refer
to devices not equipped in your system.
For further information on the default settings and operating
procedures, refer to the Operating Instructions included
with the individual units.
System Unit Setup...

36
Camera Patrol Learning
There are two ways of setting up camera patrol learning.
One is to use the camera setup menu and the other is to
operate the camera.
Follow the procedures below to set up while operating the
combination camera.
1. Select the desired system unit, monitor and combina-
tion camera.
2. Press the PATROL PLAY/PATROL LEARNbutton
while holding down the PROGRAM/CAM SETUP/CAM
FUNCTIONbutton.
[LEARNING] appears on the monitor.
3. Operate the camera using the following controls so that
it...

37
Camera Preset Position
There are two ways of presetting camera positions.
One is to use the camera setup menu of the combination
camera and the other is to operate the System Controller as
follows.
1. Select the desired system unit, monitor and camera.
2. Move the camera to a position you wish to preset, using
the joystick.
Adjust the picture using the following buttons.
• Iris (Open/Close)
• Focus (Far/Near)
• Zoom (Tele/Wide)
Note:The memorized parameters may differ somewhat
depending on the camera...

39
For WJ-FS616C
Multiplexer System 

40
MAJOR OPERATING CONTROLS & THEIR FUNCTIONS 
Front View (Template for WJ-FS616C)
System ControllerOPERATE LOCK ALARM
SPOT
AUTO/+IRIS
CLOSE OPEN
NEAR FAR
TELE WIDE
FOCUS
ZOOM IRIS RESET
VTR
CAM MULTI
SCREENSEQUENCE
EL-ZOOMMULTI SELECT
STILLPRE-POSI
ALT
ALM RESET
ALM SUSPEND
FUNCTION
ALL RESET
CAMERA SET
ON OFF ON/OFF
SETUPAUTO
FOCUS HOME/-UNITCAM
ESC SET
UP
LR
DOWN
UNITCAMERA
For Multiplexer
WV-CU C360
T/L MODE
CAMERA SITE CONTROL
AUX 2
AUX 1
!5
!6
!7
!8
!9
@0
@1
@2
@3
@4
@5
@6
@7
@8
qwert...

41
!0Home/Decrement button (HOME/–)
Moves the camera to the home position.
During the setup, this button is used to select the
desired parameter in the setup menu.
!1Auto Focus button (AUTO FOCUS)
Activates the auto focus function when the specified
camera with auto focus feature is selected.
!2Camera/Set button (CAM/SET)
CAM:Selects a camera. Enter a camera number with
the numeric buttons, then press the CAM/SET but-
ton.
SET:Executes the currently highlighted setting in the
setup menu.
!3Numeric...