Panasonic System Controller Wv Cu360c Operating Instructions

73
SETUP PROCEDURES (For System 850)
To display the setup menus for the WV-CU360C System Controller on the LED display, set the MODE switch and power up the
controller as described below.
Prior to Setup
Do the following before entering the setup mode.
1. Confirm that all necessary connections and switch set-
tings are complete.
2. With the power turned off, move bit #6 of the MODE
switch on the rear to ON (administrator) position.
3. Supply power to the controller.
4. Turn on the power of cameras and...

74
Setup Procedures
Set up the baud rate and parity check mode for the controller while observing the LED on the front panel.
Menu 
Selection
Move Joystick 
UP and down 
to selectSetup Menus
Parameter Selection (default*)
LED Display
blinking
Setup
Administrator
Password
Prompt
Speed
ParityInitial
Display
Authorization
Baud Rate
(bps)Press
twice
Parity Check
CAM
SET
CAM
SET
MON
ESC
LED prompts you to enter pass-
word
Enter a 5-digit password, 
press                 (12345*)
(1) 2 400  (2) 4 800  (3) 9...

75
OPERATING PROCEDURES (For System 850)
Login & Logout
Login
1. Turn on the power switches of all system components.
2. Turn on the power of the WV-CU360C System Controller
by connecting the AC adapter to the AC outlet.
The OPERATE indicator lights up and “NO USER” will
appear on the LED display of the System Controller.
3. Enter your registered Operator ID number (up to 5 dig-
its) using the numeric buttons, then press the [CAM-
ERA (ENTER)]button.  The underline appears on the
LED display.
4. Enter...

77
Appendix 

78

Power Source: 9 V DC, 400 mA (Use the supplied AC Adapter only)
Data Output/Input Port: 6-conductor modular jack (RS-485, Full Duplex) x2
Switching Functions : Camera selection, Monitor Selection/Sequence
Switching of Live and Playback/Changing the Multiscreen Picture Layout/
Still/Electronic Zoom/Sequence (available for WJ-FS309/316/409/416/616/
616C)
Controller Number 1-8 (Rotary Switch)
Unit Address Selection: 1-99 (for PS
•Data), 1-16 (WJ-FS616/616C)
Monitor Number Selection: 1-99 (for PS
•Data)...

79
The System Controller WV-CU360C can be reset to the
default settings.
1. Remove the DC plug of the AC adapter from the con-
troller.
2. While pressing numeric buttons 2, 4and 6simultane-
ously, plug in the DC plug.
3. When all indicators light up, resetting is completed.
Note:Keep the DC plug connected to the controller
until the reset procedure is completed. 
123
46
789
0
5
PROGRAM
PRESET ESC HOME
SET PRESET
ALL RESET 

N1001-0 V8QA5880BN Printed in Japan
N19 Imprimé au Japon 2001 © Matsushita Communication Industrial Co., Ltd.  All rights reserved.Panasonic Canada Inc.
5770 Ambler Drive, Mississauga,
Ontario, L4W 2T3 Canada (905)624-5010
Panasonic Sales Company
Division of Matsushita Electric of Puerto Rico Inc.
Ave. 65 de Infanteria. Km. 9.5
San Gabriel Industrial Park, Carolina,
Puerto Rico 00985 (809)750-4300
Panasonic Security and Digital Imaging Company
A Division of Matsushita Electric Corporation of America...