Panasonic Sc Pt560ee K Operating Instructions

							11
Simple Setup
Presetting the radio stations
ENGLISH RQTX0098
Up to 30 stations can be set.
≥“SET OK” is displayed when the stations are set, and the radio tunes 
to the last preset station.
≥“ERROR” is displayed when automatic presetting is unsuccessful. 
Preset the stations manually (➜25).≥The FM setting is also shown on the TV display.
∫If noise is excessive
Press and hold [-PLAY MODE] (main unit: [—FM MODE]) to 
display “MONO”.
Press and hold the button again to cancel the mode.
≥The mode is also cancelled when you change the frequency.
step
7Presetting the radio stations
Presetting stations automatically
1Select “FM”.≥Main unit:
Press [SELECTOR].
2
(press and hold)Release the button when 
“FM AUTO” is displayed.
≥Main unit:
Press and hold [MEMORY].
The tuner tunes to the lowest 
frequency and starts to preset all 
the stations it can receive into the 
channels in ascending order.
-SLEEP-REPEAT
MUTING
-FL DISPLAY-PLAYMODE
SUBWOOFER-CH SELECT
FUNCTIONS
SETUPSOUND
LEVEL
TOP MENU
MENU
DIRECTNAVIGATOR
STA R T
PLAY
LISTRETURN
SLOW/SEARCH
PLAY PA USE STOP
SKIP
123
456
789
0
10CANCEL
VOL
ONE TOUCH  PLAY
FM/EXT-IN
TV/AVVOLiPod/USB
TVDV D
-W.S.
PL
OK
FM/EXT-IN
-PLAY MODE
OK
,
Numbered
buttons
SELECTOR
TUNE
MEMORY
-TUNE MODE/—FM MODE
FM/EXT-IN
OK
W
P
Confirming the preset channels
1Select “FM”.≥Main unit:
Press [SELECTOR].
2Select the channel.≥To select a 2-digit number
e.g. 12: [S10] ➜ [1] ➜ [2]
Alternatively, press [X,W].
≥Main unit:
Press [-TUNE MODE] to select 
“PRESET” on the display, and 
then press [XTUNEW] to select 
the channel.
When a stereo FM broadcast is 
being received, “ST” lights in the 
display.
FM/EXT-IN
123
456
789
0
10
ST
MONO
11
SC-PT560_860E-RQTX0098-R_eng.book  Page 11  Tuesday, December 4, 2007  9:02 AM
 
						

							12
Control reference guide
RQTX0098 ENGLISH
Other Panasonic audio/video equipment may start functioning when you 
operate the unit using the supplied remote control.
You can operate this unit in another mode by setting the remote control 
operating mode to “REMOTE 2”.The main unit and remote control must be set to the same mode.
1 Press and hold [9/5] on the main unit and [2] on the remote 
control until the main unit’s display shows “REMOTE 2”. 
2 Press and hold [OK] and [2] on the remote control for at least 2 
seconds.
To change the mode back to “REMOTE 1”, repeat both steps above by 
replacing [2] with [1].
11
-SLEEP-REPEAT-FL DISPLAY-PLAY MODE
OK
MUTINGSUBWOOFER
-CH SELECT
FUNCTIONS
SETUPSOUND
TOP MENU
MENU
DIRECTNAVIGATOR
STA R T
PLAY
LISTRETURN
SLOW/SEARCH
PLAY PA USE STOP
SKIP
123
456
789
0
10CANCEL
VOL
ONE TOUCH PLAY
FM/EXT-IN
TV/AVVOLiPod/USB
DV D
-W.S.
PL
114
15
16
17
18
20
21
22
24
3
6
8
9
1110
12
23
25
TV13
LEVEL
SETUP
[PT560][PT860]
SETUP
-AUTO SP
5
419
7
2
1Turn the main unit on/off (➜10)
2Select channels and title numbers etc. / Enter numbers
(➜11, 15)
3Cancel (➜16)
4Select preset radio stations (➜11)
5Basic operations for play (➜14, 15)
6Show a disc top menu or program list (➜15, 17)
7Select or confirm menu items / Frame-by-frame  (➜15)
8Show a disc menu or play list (➜15, 17)
9Show on-screen menu / Display RDS text data (➜18, 25)
:Turn Dolby Pro LogicII on/off (➜28)
;
[PT560] Show setup menu (➜10)
[PT860] Show setup menu (➜10) / Auto speaker setup 
(➜29)
<
Select sound mode / Turn Whisper-mode Surround on/off 
(➜28)
=TV operations
Aim the remote control at the Panasonic TV and press the 
button.
[Í]: Turn the TV on/off
[TV/AV]: Change the TV’s video input mode
[r, s]: Adjust the TV volume
This may not work properly with some models.
>Select disc as the source (➜10)
?Select USB or iPod as the source (➜30, 31)
@Select FM tuner or external audio as the source 
(➜11, 30)
FM#AV#AUX#D-IN
^---------------------------}
AStart up and play a disc automatically (➜15, 26)
BAdjust the volume of the main unit
CSelect radio stations manually (➜25)
DShow START menu (➜13)
EReturn to previous screen (➜15)
FSwitch information on the main unit’s display (➜15)
or
Set the Sleep timer
Press and hold [—SLEEP].
While the time is shown on the main unit’s display, press [—SLEEP] 
repeatedly.
SLEEP 30#SLEEP 60#SLEEP 90#SLEEP120
^--------------------- OFF (Cancel) ,----------------------}
≥To confirm the remaining time, press and hold the button again.
GSelect the play mode / Set the repeat mode (➜16)
HMute the sound≥“MUTING” flashes on the main unit’s display while the function is 
on.
≥To cancel, press the button again or adjust the volume.
≥Muting is cancelled when you switch the unit to standby.
IAdjust the subwoofer level or select speaker channel 
(➜29)
Avoiding interference with other Panasonic equipment
Control reference guide
12
SC-PT560_860E-RQTX0098-R_eng.book  Page 12  Tuesday, December 4, 2007  9:02 AM
 
						

							13
Control reference guide / Utilising the START menu
13
ENGLISH RQTX0098
You can select sound effects, desired source, or access playback/menus 
by using the START menu.
When “Input Selection” is selectedYou can select a desired source from the menu.
≥DVD/CD (➜10), FM (➜11), AV (➜30), AUX§ (➜30), 
DIGITAL IN§ (➜30), USB (➜30), iPod (➜31)§“(TV)” will appear beside “AUX” or “DIGITAL IN”, indicating the TV audio 
setting for VIERA Link “HDAVI Control” (➜26).
When “Sound” is selectedYou can set the equalizer (➜28) from the menu.
Press [3,4], then press [OK] to make the settings.When a disc is loaded or an USB device is connected, you can also 
access playback or menus from the START menu.
e.g.[DVD-V]
When the on-screen control panel appears
e.g.[DVD-V] (when “Playback Disc” is selected from the START menu)
You can operate the playback with the indicated controls.
VOLUME
12131415
SW
BOOST
OPEN
CLO
SE
9
10
11
SELECTOR TUNEMEMORYTUNE MODE FM MODEAC INSW
BOOST
12345678
OPEN CLOSE
1Standby/on switch [Í/I]
Press to switch the unit from on to standby mode or vice 
versa. In standby mode, the unit is still consuming a small 
amount of power. (➜14)
2This indicator lights when the unit is connected to the AC 
mains supply.
3Open/Close the disc tray (➜14)
4Turn Subwoofer Boost on/off (➜29)
5Select the source
DVD/CD#USB#FM#AV#AUX#D-IN#IPOD
^--------------------------------------------------------------------------}
6Skip or slow-search play  / Select the radio stations 
(➜11, 14)
7Stop playing  /  Select the tuning mode / Adjust the FM 
reception condition (➜11, 14)8Play discs  /  Memorize the receiving radio stations
(➜14, 25)
9Connect USB device (➜30)
:Connect iPod (➜31)
;
[PT860] Connect Auto speaker setup microphone (➜29)
Adjust the volume of the main unit
?Connect headphones (not included)
Headphone plug type: ‰3.5 mm stereo mini plug
≥Reduce the volume before connecting.
≥Audio is automatically switched to 2-channel stereo.
≥To prevent hearing damage, avoid listening for prolonged periods 
of time.
Excessive sound pressure from earphones and headphones can 
cause hearing loss.
Utilising the START menu
1Show the START menu.
e.g.
2Select an item.
≥To exit press [START].
START
DVD/CD Home Cinema
OK
RETURN
Input Selection
Sound
OK
DVD/CD Home Cinema
OK
RETURN
Input Selection
Sound Playback Disc
TOP  MENU (DVD)
MENU (DVD)
Playback/
menu access
SEARCHRETURN SEARCH
PLAYPA USE
STOP
13
SC-PT560_860E-RQTX0098-R_eng.book  Page 13  Tuesday, December 4, 2007  9:02 AM
 
						

							14
Basic play
RQTX0098 ENGLISH
Basic play
Preparation
To display the picture, turn on your TV and change its video input mode.
[Note]
≥DISC CONTINUES TO ROTATE WHILE MENUS ARE DISPLAYED. To preserve the unit’s motor and your TV screen, press [∫] (Stop) when you are 
finished with the menus.
≥Total title number may not be displayed properly on iR/iRW.
Using the main unit
VOLUME
TUNEMEMORYOPENCLOSE
SELECTOR12
3
45
  , + VOLUME
Start play.
≥Tu r n  [`, i VOLUME] to 
adjust the volume.
≥You can enjoy surround 
sound when you press 
[ÎPLII] on the remote 
control to turn on Dolby Pro 
LogicII (➜28). (Stop)
Select “DVD/CD”. Turn on the unit.
Press to skip.
Press and hold to
– search during play
– start slow-motion play during 
pause
≥Press [1] (Play) to start normal 
play.
Open the disc tray.
Load the disc.
≥Load double-sided discs 
so the label for the side 
you want to play is facing 
up.
≥For DVD-RAM, 
remove the disc from 
its cartridge before 
use.
Label facing up
14
SC-PT560_860E-RQTX0098-R_eng.book  Page 14  Tuesday, December 4, 2007  9:02 AM
 
						

							15
Basic play
ENGLISH RQTX0098
If you are experiencing problems, refer to troubleshooting (➜34 to 36).
Using the remote control
One touch 
playThe main unit automatically turns 
on and starts playing the disc in 
the tray.
Stop
The position is memorised while 
“RESUME STOP” is on the screen.
≥Press [1PLAY] to resume.
≥Press [∫STOP] again to clear 
the position.
Pause
≥Press [1PLAY] to restart play.
Skip
Search(during play)
≥Up to 5 steps.
≥Press [1PLAY] to start normal 
play.
Slow-motion(during pause)
≥[VCD] Slow-motion: 
Forward direction only.
≥[MPEG4] [DivX] 
Slow-motion: Does 
not work.
Frame-by-
frame
(during pause)
[DVD-VR] [DVD-V] [VCD]
≥[DVD-VR] [VCD] Forward direction 
only.
12
5
MENU, PLAY LIST
,SKIP
STOP,     PAUSE
+,    VOL
TOP MENU,
DIRECT NAVIGATOR
-SLEEP-REPEAT
MUTING
-FL DISPLAY-PLAY MODE
SUBWOOFER-CH SELECT
FUNCTIONS
SETUPSOUND
LEVEL
TOP MENU
MENU
DIRECTNAVIGATOR
STA R T
PLAY
LISTRETURN
SLOW/SEARCH
PLAY PA USE STOP
SKIP
123
456
789
0
10CANCEL
VOL FM/EXT-IN
TV/AVVOLiPod/USB
TVDV D
-W.S.
PL
OK
ONE TOUCH  PLAY
RETURN
-FL DISPLAY
SLOW/SEARCH,
ONE TOUCH  PLAY
OK
Numbered
buttons
ONE TOUCH  PLAY
STOP
PAUSE
SKIP—
SLOW/SEARCH
OK
On-screen 
item select
Enter 
number
[DVD-VR] [DVD-V] [VCD] [CD]
e.g. To select 12:
[S10] ➜ [1] ➜ [2]
[VCD] with playback control
Press [∫STOP] to cancel the PBC 
function, and then press the 
numbered buttons.
[DVD-V]
Shows a disc top menu.
[DVD-VR]
Press the button to show the 
programs (➜17).
Disc menu
[DVD-V]
Shows a disc menu.
[DVD-VR]
Press the button to show a play list 
(➜17).
[VCD] with playback control
Shows a disc menu.
Return to 
previous 
screen
Main unit 
display
[DVD-VR] [DVD-V] [WMA] [MP3] 
[MPEG4] [DivX]
Time display
,-. Information display
(e.g. [DVD-VR] Program 
number)
[JPEG]
SLIDE
,-.Contents number
OK
Select
Confirm—
123
456
789
0
10
TOP MENU
DIRECTNAVIGATOR
MENU
PLAY
LIST
RETURN
RETURN—
-SLEEP-FL DISPLAY
15
SC-PT560_860E-RQTX0098-R_eng.book  Page 15  Tuesday, December 4, 2007  9:02 AM
 
						

							16
Other playback functions
RQTX0098 ENGLISH
Other playback functions
This works only when the elapsed play time can be displayed. It also 
works with all JPEG content.
Items shown differ depending on the type of disc and playback mode.Preparation
≥[DVD-VR] Select “DATA” in “DVD-VR/DATA” (➜23, “OTHERS” menu) to 
play WMA, MP3, JPEG, MPEG4 or DivX contents.
≥If “PLAYBACK MENU” screen appears, select “AUDIO/PICTURE” or 
“VIDEO” (➜17, Using PLAYBACK MENU), then proceed with the 
above.
≥For a disc with both WMA/MP3 and JPEG contents, select either music 
or picture contents.
WMA/MP3: Select “MUSIC PROGRAM” or “MUSIC RANDOM”.
JPEG: Select “PICTURE PROGRAM” or “PICTURE RANDOM”
≥[DVD-V] Some items cannot be played even if you have programmed 
them.
To select all the items
Press [3,4] to select “ALL” and press [OK].
To clear the selected program
1 Press [1] and then press [3,4] to select the program.
2 Press [CANCEL].
To clear the whole program
Press [1] several times to select “CLEAR ALL”, and then press [OK].
The whole program is also cleared when the disc tray is opened, the unit 
is turned off or another source is selected.
Repeat play
1During play
(press and hold)Show the repeat mode.
2While the repeat 
mode is displayedSelect an item to be repeated.e.g. [DVD-V]
`TITLE ---. `CHAP. ---. `OFF
^------------------------------------------------------b
≥To cancel, select “OFF”.
CANCEL
-SLEEP-REPEAT
MUTING
-FL DISPLAY-PLAY MODE
SUBWOOFER-CH SELECT
FUNCTIONS
SETUPSOUND
LEVEL
TOP MENU
MENU
DIRECTNAVIGATOR
STA R T
PLAY
LISTRETURN
SLOW/SEARCH
PLAY PA USE STOP
SKIP
123
456
789
0
10CANCEL
VOL FM/EXT-IN
TV/AVVOLiPod/USB
TVDV D
-W.S.
PL
OK
ONE TOUCH PLAY
PLAY STOP
—REPEAT -PLAY MODE
OK
RETURN
-REPEAT-PLAY MODE
-REPEAT-PLAY MODE
Program and Random play
[DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG] [MPEG4] [DivX]
While stoppedSelect the play mode.Program and random playback screens 
appear sequentially.
Program ------------------------------------------) Random
^--- Exit program and random screens (}
Program play (up to 30 items)
1Select an item.e.g. [DVD-V]
≥Repeat this step to program other items.
≥To return to the previous menu, press 
[RETURN].
2Start play.
Random play
1(Only when the disc has groups or multiple 
titles.)
Select a group or title.e.g. [DVD-V]
≥“¢” represents selected. To deselect, press 
[OK] again.
2Start play.
-REPEAT-PLAY MODE
OK
DVD-V  PROGRAM
SELECT TITLETITLE CHAP.
TITLE  1
TITLE  2
TITLE  3
TITLE  41
2
3
4
5
6
7
8
9
10
START:PLAY
CLEAR ALL
PLAY
OK
DVD-V  RANDOM
SELECT  TITLE
TITLE  1
TITLE  2
TITLE  3
PRESS PLAY TO START
PLAY
16
SC-PT560_860E-RQTX0098-R_eng.book  Page 16  Tuesday, December 4, 2007  9:02 AM
 
						

							17
Using navigation menus
ENGLISH RQTX0098
Using navigation menus
≥[DVD-VR] Select “DATA” in “DVD-VR/DATA” (➜23, “OTHERS” menu) to 
play WMA, MP3, JPEG, MPEG4 or DivX contents.
“PLAYBACK MENU” screen appears when the disc contains both video 
(MPEG4/DivX) and other format (WMA/MP3/JPEG).
You can select to play from your desired item while the “DATA-DISC” 
screen is displayed.
e.g.
≥To display/exit the screen, press [MENU].
Play starts from the selected content. 
∫Selecting the picture in Thumbnail menu
[JPEG]
To go to other group
1 Press [3] to select the group name.
2 Press [2,1] to select the group and press [OK].
≥Titles appear only if the titles are recorded on the disc.
≥You cannot edit programs, play lists and disc titles.
This works only when the disc contains a play list.
Playing data discs
[WMA] [MP3] [JPEG] [MPEG4] [DivX]
Using PLAYBACK MENU
Select “AUDIO/PICTURE” or “VIDEO”.≥To start play, press [1PLAY].
≥To select an item to play, refer “Playing from 
the selected item” (➜below).
Playing from the selected item
Select an item.≥To return to the previous screen, press 
[RETURN]. 
≥Maximum: 12 characters for file/folder name.
-SLEEP-REPEAT
MUTING
-FL DISPLAY-PLAY MODE
SUBWOOFER-CH SELECT
FUNCTIONS
SETUPSOUND
LEVEL
TOP MENU
MENU
DIRECTNAVIGATOR
STA R T
PLAY
LIST
SLOW/SEARCH
PLAY PA USE STOP
123
456
789
0
10CANCEL
VOL FM/EXT-IN
-W.S.
PL
OK
ONE TOUCH PLAY
STOP
TOP MENU,
DIRECT NAVIGATOR
MENU,
PLAY LIST
OK
PLAY
,SKIPSKIP
RETURNRETURN
OK
PLAYBACK  MENU
WMA/MP3/JPEG
MPEG4/DivXAUDIO/PICTURE
VIDEO
OK
DATA-DISC
ROOT
Perfume
My favorite1
My favorite2
My favorite3
Underwater
Fantasy planet
City of cascade
Infinite unitLady Starfish
Metal Glue
Life on Jupiter
Starpersons1
Starpersons2
OK
RETURN
Group (Folder):
Content (File):
: WMA/MP3
: JPEG
: MPEG4/DivX
OK
1While a picture is 
displayede.g.
2Select a picture.≥Press [:,9SKIP] to skip page by 
page.
Playing RAM and DVD-R / -RW (DVD-VR) discs
[DVD-VR]
Playing the programs
1While stoppede.g.
≥To exit the screen, press [DIRECT 
NAVIGATOR].
2Select the program.≥Press [2,1] to skip page by page.
Playing a play list
1While stoppede.g.
≥To exit the screen, press
 [PLAY LIST].
2Select the play list.≥Press [2,1] to skip page by page.
TOP MENU
DIRECTNAVIGATORJPEG  imagesG 1/  1:C 3/ 9
Group nameGroup and content 
number
OK
TOP MENU
DIRECTNAVIGATOR
PG
DATELENGTH
TITLE
1
0:16:02 10/11
LIVE CONCERT
02:15
2
0:38:25 12/05
AUTO ACTION
3
1 : 16: 05 04/03
CINEMA
02:10 01:30
OK
RETURN
OK
MENU
PLAY
LISTPL
DATELENGTH
TITLE
1
0:00:10 11/11
CITY PENGUIN
00:01
2
0 : 01: 20 12/01
FOOTBALL
3
1 : 10: 04 01/02
SPECIAL
01:10 01:20
OK
RETURN
OK
17
SC-PT560_860E-RQTX0098-R_eng.book  Page 17  Tuesday, December 4, 2007  9:02 AM
 
						

							18
Using on-screen menus
RQTX0098 ENGLISH
Using on-screen menus
∫Menu 1 (Disc/Play)
CANCEL
-SLEEP-REPEAT
MUTING
-FL DISPLAY-PLAY MODE
SUBWOOFER-CH SELECT
FUNCTIONS
SETUPSOUND
LEVEL
TOP MENU
MENU
DIRECTNAVIGATOR
STA R T
PLAY
LIST
SLOW/SEARCH
PLAY PA USE STOP
SKIP
123
456
789
0
10CANCEL
VOL FM/EXT-IN
TV/AVVOLiPod/USB
TVDV D
-W.S.
PLFUNCTIONS
OKOK
ONE TOUCH PLAY
PLAY
RETURNRETURN
Numbered
buttons
1Show the on-screen 
menu.
Each time you press the button:
Menu 1 (Disc/Play)
Menu 2 (Video)
Menu 3 (Audio)
Menu 4 (HDMI)
Exit
e.g. Menu 1 (Disc/Play) [DVD-V]
2Select the item.
e.g. Menu 1 (Disc/Play) [DVD-V]
3Make the settings.
4Exit.
FUNCTIONS
T1C1
1:ENG
3/2.1 :EOFF
TITLE  SEARCH
Current item
Item name
OK
T1C1
1:ENG
3/21 :EOFF
CHAPTER  SEARCH
Current setting
OK
RETURN
Items shown differ depending on the type of disc.
TRACK SEARCH
TITLE SEARCH
CONTENT SEARCH
CHAPTER SEARCH
PG SEARCH
PL SEARCHTo start from a specific item
≥[VCD] This does not work when using playback 
control.
e.g. [DVD-V] : T2 C5
To select numbers for data disc
e.g. 123: [S10] ➜ [1] ➜ [2] ➜ [3] ➜ [OK]
AUDIO
[DVD-V] [DivX] (with multiple soundtracks)
To select audio soundtrack
[DVD-VR] [VCD] 
To select “L”, “R”, “L+R” or “L R”
[DVD-V] (Karaoke disc)
To select “ON” or “OFF” for vocals
To select “OFF”, “V1”, “V2” or “V1+V2” for 
vocal selections
Actual operations depend on the disc. Read the 
disc’s instructions for details.
Signal type/data
LPCM/PPCM/ÎD/DTS/MP3/MPEG: Signal type
kHz (Sampling frequency)/bit/ch (Number of 
channels)
≥[DivX] It may take some time for play to start if 
you change the audio on a DivX video disc.
3/2 .1ch
.0: No surround
.1: Mono surround
.2: Stereo surround (left/right).1: Low frequency effect(not displayed if there is no signal)
.1: Center
.2: Front leftiFront right
.3: Front leftiFront rightiCenter e.g.
PLAY SPEED
[DVD-VR] [DVD-V]
To change play speed
– from “k0.6” to “k1.4” (in 0.1-unit steps)
≥Press [1PLAY] to return to normal play.
≥After you change the speed
– Dolby Pro Logic II has no effect.
– Audio output switches to 2-channel stereo.
– Sampling frequency of 96 kHz is converted to 
48 kHz.
≥This function may not work depending on the 
disc’s recording.
REPEAT MODE
(➜16, Repeat play)
A-B Repeat (To repeat a specified section)Except [JPEG] [MPEG4] [DivX] [DVD-VR] (Still picture 
part) [VCD] (SVCD)
Press [OK] at the starting and ending points.
≥Select “OFF” to cancel.
SUBTITLE
[DVD-V] [DivX] (with multiple subtitles) 
[VCD] (SVCD only)
To select subtitle language
≥On iR/iRW, a subtitle number may be shown 
for subtitles that are not displayed.
[DVD-VR] (with subtitle on/off information)
To select “ON” or “OFF”
≥This may not work depending on the disc.
[DivX] (➜20, Displaying DivX subtitles text)
ANGLE
[DVD-V] (with multiple angles)
To select a video angle
DATE DISPLAY
[JPEG] To select “ON” or “OFF” for picture’s 
date display
ROTATION
To rotate a picture (during pause)
[JPEG] : 0,------. 90,------.180,------.270 
^--------------------------------------------J
JPGDATE
18
SC-PT560_860E-RQTX0098-R_eng.book  Page 18  Tuesday, December 4, 2007  9:02 AM
 
						

							19
Using on-screen menus
ENGLISH RQTX0098
∫Menu 2 (Video)
∫Menu 3 (Audio)∫Menu 4 (HDMI)
(Continued on next page)
PICTURE MODE
NORMAL
CINEMA1: Mellows images and enhances detail 
in dark scenes.
CINEMA2:Sharpens images and enhances 
detail in dark scenes.
DY N A M I C: Enhances the contrast for powerful 
images.
ANIMATION: Suitable for animation.
ZOOM
To select zoom sizes
NORMAL, AUTO, k2, k4
TRANSFER 
MODE
If you have chosen “480p”/“576p”/“720p”/“1080p” 
(progressive), “1080i” (interlace) 
[“VIDEO FORMAT” in Menu 4 (HDMI)] or 
“PROGRESSIVE” under “VIDEO OUT (I/P)” 
(➜22, “VIDEO” menu), select the method of 
conversion for progressive output to suit the type 
of material.
≥The setting will return to “AUTO” or “AUTO1” 
when the disc tray is opened, the unit is turned 
off or another source is selected.
When playing PAL discs
AU TO: Automatically detects the film and video 
content, and appropriately converts it.
VIDEO: Select when using “AUTO”, and the 
content is distorted.
FILM: Select this if the edges 
of the film content 
appear jagged or rough 
when “AUTO” is 
selected. 
However, if the video content is distorted 
as shown in the illustration to the right, 
then select “AUTO”.
When playing NTSC discs
AU TO1: Automatically detects the film and video 
content, and appropriately converts it.
AU TO2:
In addition to “AUTO1”, automatically 
detects film contents with different frame 
rates and appropriately converts it
.
VIDEO: Select when using “AUTO1” and 
“AUTO2”, and the content is distorted.
SOURCE SELECT[DivX]When you select “AUTO” the constructing method 
of the DivX contents is automatically distinguished 
and output. If the picture is distorted, select 
“INTERLACE” or “PROGRESSIVE” depending on 
which constructing method was used when the 
contents were recorded to disc.
AUTO, INTERLACE, PROGRESSIVE
DIALOGUE 
ENHANCER
To make the dialogue in movies easier to hear
[DVD-V] (Dolby Digital, DTS, MPEG, 3-channel or 
higher, with the dialogue recorded in the center 
channel)
[DivX] (Dolby Digital, 3-channel or higher, with the 
dialogue recorded in the center channel)
OFF, ON
Dolby PLII
OFF, MOVIE, MUSIC 
(➜28, Using Dolby Pro LogicII)PLII
HDMI STATUS
To show HDMI information.
(➜20, Confirming HDMI information)
HD ENHANCER
This works when the HDMI connection is being 
used with “VIDEO PRIORITY” (➜23, “HDMI” 
menu) set to “ON”.
To sharpen the “720p”, “1080i” and “1080p” 
picture quality
OFF, 1 (weakest) to 3 (strongest)
VIDEO FORMAT
This works when the HDMI connection is being 
used with “VIDEO PRIORITY” (➜23, “HDMI” 
menu) set to “ON”.
To select suitable picture quality with your TV
(Video recordings will be converted to, and output 
as, high-definition video.)
§480p/576p/720p/1080p (progressive)§480i/576i/1080i (interlaced)
≥If the picture is distorted, press and hold 
[CANCEL] until the picture is displayed 
correctly. (The output will return to “480p/
576p”.)
§The numbers displayed depend on the disc 
being played. One of the above numbers is 
displayed.
COLOUR SPACE
This works when the HDMI connection is being 
used with “VIDEO PRIORITY” (➜23, “HDMI” 
menu) set to “ON”.
To select suitable picture colour with your TV
YC
bCr (4:2:2), Y CbCr (4:4:4), RGB
≥If the setting above is not compatible with your 
TV, it will not be displayed.
HDMI
19
SC-PT560_860E-RQTX0098-R_eng.book  Page 19  Tuesday, December 4, 2007  9:02 AM
 
						

							20
Using on-screen menus / About DivX VOD contents
RQTX0098 ENGLISH
Using on-screen menus
Confirming HDMI informatione.g.
1 Connection status
2 Shows the output signal type.
3 Shows the number of audio channels.
4 (➜19, VIDEO FORMAT)
5 (➜19, COLOUR SPACE)
[Note]
When “OFF” is selected in “AUDIO OUT” (➜23, “HDMI” menu), “– – –” will 
be displayed in “AUDIO STREAM”.
You can display subtitles text recorded onto the DivX video disc on this unit.Depending on the methods used to create the file, the following functions 
may not work, or the subtitles may not be displayed correctly.
1 During play, select “SUBTITLE” in Menu 1 (➜18).
2 Press [3,4] to select “TEXT ON” and press [OK].
≥DivX video files that do not display “TEXT ON” do not contain 
subtitles text. Subtitles text cannot be displayed.
≥If the subtitles text are not displayed correctly, try changing the 
language settings (➜ below).
Subtitles text language settings
1 During play, press [SETUP].
2 Press [3,4] to select “DISC” and press [OK].
3 Press [3,4] to select “SUBTITLE TEXT” and press [OK].
4 Press [3,4] to select “LATIN1”, “LATIN2” (factory setting), 
“CYRILLIC” or “TURKISH” and press [OK].
≥To exit the screen, press [SETUP].
Types of subtitles text file that can be displayed
Subtitles text that satisfy the following conditions can be displayed on this 
unit.
≥File format: MicroDVD, SubRip, or TMPlayer
≥File extension: “.SRT”, “.srt”, “.SUB”, “.sub”, “.TXT”, or “.txt”
≥File name: No more than 44 characters excluding the file extension
≥The DivX video file and subtitles text file are inside the same folder, and 
the file names are the same except for the file extensions.
≥If there are more than one subtitles text files inside the same folder, they 
are displayed in the following order of priority: “.srt”, “.sub”, “.txt”.
[Note]
≥If the file name of the DivX video file is not displayed correctly on the 
menu screen (the file name is displayed as “¢”), or the file size exceeds 
256 KB, the subtitles text may not be displayed correctly. 
≥The subtitles text cannot be displayed during menu display or when 
operations such as search are being performed.DivX Video-on-Demand (VOD) content is encrypted for copyright 
protection. In order to play DivX VOD content on this unit, you first need to 
register the unit.
Follow the online instructions for purchasing DivX VOD content to enter 
the unit’s registration code and register the unit. For more information 
about DivX VOD, visit www.divx.com/vod.
Display the unit’s registration code(➜23, “REGISTRATION” in “OTHERS” menu) 
≥We recommend that you make a note of this code for future reference.
≥After playing DivX VOD content for the first time, another registration 
code is then displayed in “REGISTRATION (DIVX)”. Do not use this 
registration code to purchase DivX VOD content. If you use this code to 
purchase DivX VOD content, and then play the content on this unit, you 
will no longer be able to play any content that you purchased using the 
previous code.
≥If you purchase DivX VOD content using a registration code different 
from this unit’s code, you will not be able to play this content. 
(“AUTHORIZATION ERROR” is displayed.)
Regarding DivX content that can only be played a set 
number of times
Some DivX VOD content can only be played a set number of times. When 
you play this content, the remaining number of plays is displayed. You 
cannot play this content when the number of remaining plays is zero. 
(“RENTAL EXPIRED” is displayed.)
When playing this content
≥The number of remaining plays is reduced by one if
– you press [Í] or [SETUP].
– you press [∫STOP]. 
– you press [:,9SKIP] or [6, 5 SLOW/SEARCH] etc. and 
arrive at another content.
≥Resume function (➜15, Stop) does not work.
Displaying DivX subtitles text
HDMI   ---       I N F O R M AT I O N
CONNECTED STAT E
AUDIO STREAM
MAX CHANNEL
VIDEO FORMAT
COLOUR SPA C ECONNECTED
PCM
2ch
720p
YCbCr   4:4:4
12345
SET
RETURN
OTHERSREGISTRATION (DIVX)
DIVX (R) VIDEO ON DEMAND
YOUR REGISTRATION CODE IS
XXXXXXXX
TO LEARN MORE VISIT
www.divx.com/vod
8 alphanumeric characters
About DivX VOD contents
20
SC-PT560_860E-RQTX0098-R_eng.book  Page 20  Tuesday, December 4, 2007  9:02 AM