Panasonic Projector Pt Lz370u Operating Instructions

Remote control operation
ENGLISH - 41
Basic Operation
Remote control operation
Using the AV mute function
If the projector is not used for a certain period of time 
during the meeting intermission, for example, this 
function enables you to mute the sound and hide 
images temporarily.
 button
1) Press the  button on the 
remote control.
▶z The image disappears and the sound is muted.
2) Press the  button again.
▶zThe image and sound resume.
Note
 z The projector is not equipped with an internal 
speaker...

Remote control operation
42 - ENGLISH
Basic Operation
Switching the input
The input for projection can be switched.
 button
Press the input selection (, 
, , 
and ) buttons on the remote 
control.
Switches to computer signal input 
mode.
Switches to component (YCBCR/
YP
BPR) signal input mode.
 Switches to S-video/video signal 
input mode. If either of the input 
modes has already been selected, 
switches to another input mode.
 Switches to HDMI signal input 
mode. If either of the input modes 
has...

Remote control operation
ENGLISH - 43
Basic Operation
Using the Function button
The  to  buttons on the remote 
control can be assigned to any frequent operations to 
be used as shortcut buttons.
FUNC1 FUNC2 FUNC3
 button
Press the  to  button 
on the remote control.
▶■To assign functions to the 
 to  buttons
1) Press the  button on the 
remote control or the projector to 
select a menu option (main menu, sub-
menu, or advanced menu).
▶z Refer to “Navigating through the menu” 
(
 page 44) for on-screen...

Menu navigation
44 - ENGLISH
Settings
Menu navigation
Navigating through the menu
▶■Operating procedure
 button
1) Press the  button on the 
remote control or the control panel.
▶z
The main menu screen is displayed.
0
0
0
0
0PICTURE
POSITION
LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
SECURITY
NETWORK PICTURE \fODE
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
COLOR TE\fPERATURE
DYNA\fIC IRIS
WAVE\bOR\f \fONITOR
ADVANCED \fENU
DAYLIGHT VIEW
STANDARD
ON
AUTO
AUTO
DIGITAL CINE\fA REALITY
NOISE REDUCTION
RGB/YC
BCR...

Menu navigation
ENGLISH - 45
Settings
▶■To reset to the factory default
If the  button on the remote control 
is pressed, the values set or adjusted in the sub-
menu items will be restored to the factory default 
settings.
 button
Press the  button on the 
remote control.
This function differs depending on the screen 
displayed.
 z
When the sub-menu screen is displayed:
The sub-menu items displayed are returned to their 
default settings.
 zW

hen the individual adjustment screen is displayed:
Restores...

Menu navigation
46 - ENGLISH
Settings
Main menu
There are following seven items in the main menu.
When a main menu item is selected, the screen 
changes to a sub-menu selection screen.
Main menu itemPage
[PICTURE] 46
[POSITION]46
[LANGUAGE]47
[DISPLAY OPTION]47
[PROJECTOR SETUP]47
[SECURITY]47
[NETWORK]47
Sub menu
The sub-menu screen of the selected main menu item 
is displayed, and you can set and adjust the various 
items in the sub-menu.
▶■[PICTURE] 
Sub-menu item Factory 
default Page
[PICTURE MODE]...

Menu navigation
ENGLISH - 47
Settings
▶■[LANGUAGE] 
Details ( page 61)
▶■[DISPLA Y OPTION] 
Sub-menu item Factory 
default Page
[ON-SCREEN DISPLAY] — 62
[HDMI SIGNAL LEVEL] — 63
[CLOSED CAPTION 
SETTING] [OFF] 63
[STARTUP LOGO] [DEFAULT 
LOGO] 64
[AUTO SETUP SETTING] [AUTO] 64
[SIGNAL SEARCH] [ON] 64
[BACK COLOR] [BLUE] 65
[SXGA MODE] [SXGA] 65
[OTHER FUNCTIONS] 65
▶■[PROJECT OR SETUP] 
Sub-menu item Factory 
default Page
[STATUS] — 66
[PROJECTOR ID] [ALL] 66
[INITIAL START UP] [LAST 
MEMORY] 67...

[PICTURE] menu
48 - ENGLISH
Settings
Select [PICTURE] from the main menu, and 
select the item from the sub-menu.
Refer to “Navigating through the menu” 
(
 page 44) for the operation of the menu 
screen.
 z After selecting the item, press 
▲▼◀▶ to set.
[PICTURE MODE]
You can switch to the desired picture mode suitable 
for the image source and the environment in which 
the projector is used.
1) Press 
▲▼ to select [PICTURE MODE].
2)  
Press  ◀▶ or press the  
button.
▶z The  [PICTURE MODE] individual...

[PICTURE] menu
ENGLISH - 49
Settings
[BRIGHTNESS]
You can adjust the dark (black) part of the projected 
image.
1) Press ▲▼ to select [BRIGHTNESS].
2)  
Press  ◀▶ or press the  
button.
▶z The  [BRIGHTNESS] individual adjustment 
screen is displayed.
3) Press  ◀▶ to adjust the level.
Operation Adjustment Range
Press  ▶. Increases the 
brightness of the 
dark (black) parts of 
the screen. Maximum 
value +32
Press  ◀. Reduces the 
brightness of the 
dark (black) parts of 
the screen. Minimum 
value 
-32...

[PICTURE] menu
50 - ENGLISH
Settings
[DYNAMIC IRIS]
You can switch automatic adjustment of the lamp and 
the lens iris on/off. This augments the video to create 
a video expression with sharp contrast between light 
and shade.
1) Press ▲▼ to select [DYNAMIC IRIS].
2)  
Press  ◀▶ or press the  
button.
▶z The  [DYNAMIC IRIS] individual adjustment
 
screen is displayed.
3) Press  ◀▶ to switch [DYNAMIC IRIS].
▶z
The setting will change as follows each time 
you press the button.
[ON][OFF]
[ON]
Enables...