Panasonic Projector Pt Lz370u Operating Instructions

[LANGUAGE] menu
ENGLISH - 61
Settings
Select [LANGUAGE] from the main menu, and 
display the sub-menu.
Refer to “Navigating through the menu” 
(
 page 44) for the operation of the menu 
screen.
 z Press 
▲▼ to select the language, and press 
the  button to set.
Changing the display 
language
You can select the language of the on-screen display.
LVSOD\HGLQDFKRVHQODQJXDJH
3,&785(
326,7,21
/$1*8$*(
,63/$

[DISPLAY OPTION] menu
62 - ENGLISH
Settings
Select [DISPLAY OPTION] from the main menu, 
and select the item from the sub-menu.
Refer to “Navigating through the menu” 
(
 page 44) for the operation of the menu 
screen.
 z After selecting the item, press 
▲▼◀▶ to set.
[ON-SCREEN DISPLAY]
You can set the on-screen display.
1) Press 
▲▼ to select [ON-SCREEN 
DISPLA Y].
2)
 
Press the  button.
▶z The  [ON-SCREEN DISPLAY] screen is 
displayed.
3) Press  ▲▼ to select an item, and press 
◀▶  to change the...

[DISPLAY OPTION] menu
ENGLISH - 63
Settings
[HDMI SIGNAL LEVEL]
You can switch the setting when the projector is 
connected to an external equipment via HDMI cable 
and the image is not projected correctly.
1) Press ▲▼ to select [HDMI SIGNAL
 
LEVEL].
2)
 
Press  ◀▶ to switch [HDMI SIGNAL

 
LEVEL].
▶z The setting will change as follows each time 
you press the button.
[0-1023][64-940]
[0-1023] Select when the HDMI terminal 
and DVI-D output terminal of an 
external equipment (computer, 
etc.) is...

[DISPLAY OPTION] menu
64 - ENGLISH
Settings
[STARTUP LOGO]
You can set the logo display when the power is turned 
on.
1) Press ▲▼ to select [ST
ARTUP LOGO].
2)  
P
 ress  ◀▶ to switch [STARTUP LOGO].
▶z
The setting will change as follows each time 
you press the button.
[DEFAULT 
LOGO][USER 
LOGO][OFF]
[DEFAULT  LOGO] Projects the Panasonic logo.
[USER LOGO] Projects the logo transferred with 
“Logo Transfer Software”
*1.
[OFF] Disables the startup logo display.
*1: “Logo Transfer Software” is included...

[DISPLAY OPTION] menu
ENGLISH - 65
Settings
[BACK COLOR]
You can set the color of the projected image when 
there is no signal input.
1) Press ▲▼ to select [BACK COLOR].
2)  
Press  ◀▶ to switch [BACK COLOR].
▶z
The setting will change as follows each time 
you press the button.
[BLUE][BLACK]
[USER LOGO][DEFAULT LOGO]
[BLUE] The entire projection area appears 
blue.
[BLACK] The entire projection area appears 
black.
[DEFAULT  LOGO] Projects the Panasonic logo.
[USER LOGO] Projects the logo transferred...

[PROJECTOR SETUP] menu
66 - ENGLISH
Settings
[PROJECTOR SETUP] menu
Select [PROJECTOR SETUP] from the main 
menu, and select the item from the sub-menu.
Refer to “Navigating through the menu” 
(
 page 44) for the operation of the menu 
screen.
 z After selecting the item, press 
▲▼◀▶ to set.
[STATUS]
You can display the projector status.
1) Press 
▲▼ to select [ST
ATUS].
2)  
Press the  button.
▶z The  [STATUS] screen is displayed.
[SIGNAL]
[NAME] Displays the input signal name.
[FREQUENCY] Displays the...

[PROJECTOR SETUP] menu
ENGLISH - 67
Settings
[INITIAL START UP]
Set the mode for start-up when the  
switch is turned .
1) Press ▲▼ to select [INITIAL
 START UP].
2) Press 
◀▶ to switch [INITIAL
 START UP].
▶zThe setting will change as follows each time 
you press the button.
[LAST MEMORY][STANDBY][ON]
[LAST 
MEMORY] Starts up the projector in the 
mode it was in before the  switch is turned to 
.
[STANDBY] Starts up in the standby mode.
[ON] Starts projection immediately.
[PROJECTION METHOD]
You can set...

[PROJECTOR SETUP] menu
68 - ENGLISH
Settings
[LAMP POWER]
You can switch the electric power of projector lamp. 
Set the lamp power to meet the environment and 
purpose of projection.
1) Press ▲▼ to select [LAMP
 POWER].
2)  
Press  ◀▶ to switch [LAMP

 POWER].
▶zThe setting will change as follows each time 
you press the button.
[NORMAL][ECO]
[NORMAL]
When high brightness is needed
[ECO] When high brightness is not 
needed
Note
 z The [ECO] mode can reduce power consumption 
and operation noise.
 zThe...

[PROJECTOR SETUP] menu
ENGLISH - 69
Settings
7) Press ▲▼ to select [TIME] or 
[COMMAND], and change the settings 
a
ccording to the operation instructions 
of the menu.
[TIME] Sets the time at which the command 
will be executed using 
▲▼.
[COMMAND]
Selects a command to execute at the 
set time from the following.
[POWER ON]
[STANDBY]
[AV MUTE]
[ON]
[OFF]
[INPUT] [COMPUTER]
[VIDEO]
[S-VIDEO]
[COMPONENT]
[HDMI 1]
[HDMI 2]
[LAMP POWER] [NORMAL] [ECO]
[IN STANDBY MODE] [ON] [OFF]
[VOLUME]
8) Press  ▲▼ to...

[PROJECTOR SETUP] menu
70 - ENGLISH
Settings
Note
 zIn the following cases, lamp power may not drop 
automatically

.
–
▶
When [LAMP
  POWER] is set to [ECO]
–
▶
Immediately after the lamp is turned on or 
immediately after setting [LAMP

 POWER]
 zIf [AUT

O POWER SAVE] is [OFF], [AMBIENT 
LIGHT DETECTION], [SIGNAL DETECTION], and 
[AV MUTE DETECTION] cannot be set.
 z The selection made here is reflected to the 
indication of the “ECO setting level” in the “Multi 
Projector Monitoring & Control...