Panasonic Projector Pt Lz370u Operating Instructions

[NETWORK] menu
ENGLISH - 81
Settings
Network settings of computer
Configure the network settings (wired LAN) of the computer.
1) Turn on the power of your computer.
2) 
Follow the network administrator
 ’s instructions to configure the network settings.
▶zIf the projector is in the default settings ( page 78), make the following network settings on your computer.
IP address
192.168.10.100
Subnet mask 255.255.255.0
Default gateway 192.168.10.1
Accessing from the Web browser
1) Start up the Web browser on...

[NETWORK] menu
82 - ENGLISH
Settings
Note
 zIf you control the projector using a W

eb browser, set [NETWORK CONTROL] (
 page 79) to [ON].
 zD

o not perform setting or control simultaneously by starting up multiple Web browsers. Do not set or control the 
projector from multiple computers.
 z Change the password first. ( page 93)
 zThe administrator rights allows to use all functions. 

The user rights allows to display only the following buttons 
on the screen and use those functions: [Projector...

[NETWORK] menu
ENGLISH - 83
Settings
▶■[Projector status] page
Click [Status] 
→ [Projector status].
Displays the status of the projector for the following items.
(10)
(11)
(12)
(13)
(14) (5)
(6)
(7)
(8)
(9)
(1)
(2)
(3)
(4)
(1) [PROJECTOR TYPE]
Displays the type of the projector.
(2) [MAIN VERSION] Displays the firmware version of the projector.
(3) [POWER] Displays the power status.
(4) [PICTURE MODE] Displays the status of the picture mode.
(5) [SERIAL NUMBER] Displays the serial number of the...

[NETWORK] menu
84 - ENGLISH
Settings
▶■Error information page
When [Error (Detail)] is displayed on the [Projector status] screen, click it to display the error details.
▶z
The projector may go into the standby status to protect the projector depending on the contents of the 
error

.
[OK]: Normal opera\Ation
[FA\fLED]: O\b\burren\be of \Atrouble
[WARN\fNG]: Warning
▶zDescription of problem occurrence [F AILED]:
Item
Description
[MAIN CPU BUS] There is a problem with the microcomputer circuitry. Consult...

[NETWORK] menu
ENGLISH - 85
Settings
▶■[Network status] page
Click [Status] 
→ [Network status].
The current network setting status is displayed.
▶■ [Basic control] page
Click [Projector control] 
→ [Basic control].
(1)
(6)
(2)
(4)
(5)
(3)
(1) [INPUT]
Switches the input mode.
(2) [VOLUME] Adjusts the volume
(3) [PICTURE MODE] Switches the picture mode.
(4) [AV MUTE] Switches between on and off of the AV mute.
(5) [POWER] Switches between off and on of the power.
(6) [CLOSED CAPTION] Switches the setting...

[NETWORK] menu
86 - ENGLISH
Settings
▶■[Advanced control] page
Click [Projector control] 
→ [Advanced control].
(1)
(2)
(1) [POSITION]
Operates items regarding angle of view.
(2) [PICTURE] Operates items regarding picture quality.
▶■[Network config] page
Click [Detailed set up] 
→ [Network config].
▶z
The [CAUTION!] screen is displayed by clicking [Network config].
▶zThe current settings are displayed by clicking the [Next] button.
▶zThe following setting change screen is displayed by clicking the...

[NETWORK] menu
ENGLISH - 87
Settings
▶■[Adjust clock] page
Click [Detailed set up] 
→ [Adjust clock].
(1)
(2)
(3)
(4)(5)(6)
(7)
(1) [Time Zone]
Selects the time zone. (Factory default: GMT +09:00)
(2) [Set time zone] Updates the time zone setting.
(3) [NTP SYNCHRONIZATION] Set to [ON] to adjust the date and time automatically.
(4) [NTP SERVER NAME] Enter the IP address or server name of the NTP server 
when you set to adjust the date and time manually.
(To enter the server name, the setup of the DNS...

[NETWORK] menu
88 - ENGLISH
Settings
▶■[Ping test] page
You can check whether the network is connected to the E-mail server, POP server, DNS server, etc.
Click [Detailed set up] 
→ [Ping test].
(1)
(2)
(3)
(4)
(1) [Input IP address]
Enter the IP address of the server to be tested.
(2) [Submit] Executes the connection test.
(3) Example of display when the connection has succeeded
(4) Example of display when the connection has failed
▶■ [ECO management set up] page
You can configure the settings regarding...

[NETWORK] menu
ENGLISH - 89
Settings
▶■[E-mail set up] page
An E-mail message can be sent to the E-mail address setup in advance (up to two addresses) when the 
problem occurred or the lamp usage time reached the specified value.
Click [Detailed set up] 
→ [E-mail set up].
(1)
(2)
(3)
(4)
(5)
(6)
(1) [ENABLE]
Select [ENABLE] when using the E-mail function.
(2) [SMTP SERVER NAME] Enter the IP address or the server name of the E-mail 
server (SMTP). To enter the server name, the setup of the 
DNS server is...

[NETWORK] menu
90 - ENGLISH
Settings
▶■[E-mail set up] page (continued)
(1)
(2)
(3)
(1) [E-MAIL ADDRESS 2]
Enter the E-mail address to be sent when two E-mail 
addresses are to be used.
Leave it blank when two E-mail addresses are not to be 
used.
(2) Settings of the conditions to send E-mail Select the conditions to send E-mail to the second E-mail 
address.
[MAIL CONTENTS]:  Select either [NORMAL] or [SIMPLE].
[ERROR]:  An E-mail message is sent when an error occurred in 
the self-diagnosis.
[LAMP...