Panasonic Projector Pt Lz370u Operating Instructions

Setting up
ENGLISH - 31
Getting Started
▶zShift range of the projection screen when the projector position is fixed
Shift range for pr\uojection screen
Projector
Projection positio\un without \fens shif\ut
Shift direction Maximum range of adjustment
Horizontal (H) Approximately 26% of the projection screen width (SW) Vertical (V) Approximately 65% of the projection screen height (SH)
Note
 z Position the projector directly in front of the screen and move the lens shift lever to the center to obtain the...

Connections
32 - ENGLISH
Getting Started
Before connecting to the projector
 zRead carefully the instruction manual for the device to be connected.
 zT

urn off the power switch of the devices before connecting cables.
 z If any connection cable is not supplied with the device, or if no optional cable is available for the connection of 
the device, prepare a necessary system connection cable.
 zV

ideo signals containing too much jitter may cause the images on the screen to randomly wobble or wafture. In...

Connections
ENGLISH - 33
Getting Started
▶■/ terminals pin assignments and signal names
Outside view Pin No. Signal name Pin No. Signal name
Even-numbered pins  (2) to  (18)
(1) (19)
(2) (18)
Odd-numbered pins 
(1) to (19)(1)
T.M.D.S data 2+ (11)T.M.D.S clock shield
(2) T.M.D.S data 2 shield (12)T.M.D.S clock
-
(3)T.M.D.S data 2-(13) CEC
(4) T.M.D.S data 1+ (14)—
(5) T.M.D.S data 1 shield (15)SCL
(6) T.M.D.S data 1
-(16) SDA
(7) T.M.D.S data 0+ (17)DDC/CEC
GND
(8) T.M.D.S data 0 shield (18)+5
  V
(9)...

Connections
34 - ENGLISH
Getting Started
▶■////// terminals
Blu-ray player
Control computer Control computer
Computer
Audio \fy\ftem
To HD\bI output
HD\bI cable 
(commercially 
available) To RGB output
Computer cable 
(commercially 
available) To audio output
To audio input
Note
 z Use an HDMI High Speed cable that conforms to HDMI standards. If a cable that does not meet HDMI 
standards is used, video may be interrupted or may not be displayed.
 zIt is possible to connect with DVI devices via an...

Switching on/off
ENGLISH - 35
Basic Operation
Switching on/off
Connecting the power cord
Use the supplied power cord to prevent removal of the power cord and make sure that it is fully inserted 
into the projector.
Confirm that the  switch is on the  side before connecting the power cord.
For detailed power cord handling, refer to “Read this first!” (
 pages 2 to 10).
▶■Attaching
1) Check the shapes of the  terminal on the back side of the projector and the 
power cord connector and fully insert until...

Switching on/off
36 - ENGLISH
Basic Operation
Power indicator
The power indicator indicates the power status. Check the status of the power indicator  
before operating the projector.
3RZHULQGLFDWRU21*67$1%

Switching on/off
ENGLISH - 37
Basic Operation
Switching on the projector
Check external device connections before switching 
on the projector.
1) Connect the power cord to the 
projector.
2)
 
Connect the power plug to an outlet.
3)

 
Press the  side of the  switch to turn on the power

.
▶zThe power indicator  
illuminates or flashes red.
4) Remove the lens cover .
▶zBe sure to remove the lens cover before 
starting projection.
5) Press the power  button.
▶zThe power indicator  
flashes green, and...

Switching on/off
38 - ENGLISH
Basic Operation
Switching off the projector
1) Press the power  button.
▶zThe power of f confirmation message is 
displayed.
2) Press  ◀▶ to select [OK], and press 
the  button.
(Or press the power 
 button 
again.)
▶z Projection of the image will stop, and the power 
indicator  on the 
projector illuminates orange.
(The fan continues to operate.)
3) Wait until the power indicator  of the projector turns 
red (until the fan stops).
4)
 
Press the  side of the  switch to turn...

Projecting
ENGLISH - 39
Basic Operation
Check the connections of the external devices ( page 32), the connection of the power cord ( page 35), and 
turn on the power (
 page 37) to start projection. Select the video for projection, and adjust appearance of the 
projected image.
Selecting the input signal
Select an input signal.
1) Switch on the external devices.
▶z Press the play button on an external device, such as a Blu-ray player
. When the [DISPLA Y OPTION] menu 
→  [SIGNAL SEARCH] (
 page 64)...

Projecting
40 - ENGLISH
Basic Operation
3) Rotate the lens shift lever counterclockwise to release the lock.
4) Adjusts lens shift.
▶zAdjust the projection position with the lens shift lever .
▶z
Refer to “Lens shift and positioning” ( page 28) for details.
5) Rotate the lens shift lever clockwise to fix.
6)  
Attach the lens shift cover
 .
7)
 
Adjust the zoom and focus.
▶z Turn zoom ring and focus ring to adjust.
Focus ring
Zoom ring
Note
 z It is recommended that the images are projected continuously...