Panasonic Projector Pt Lz370u Operating Instructions

[NETWORK] menu
ENGLISH - 91
Settings
▶■[Authentication set up] page
You can set the authentication items when POP authentication or SMTP authentication is necessary to send 
an E-mail message.
Click [Detailed set up] 
→ [Authentication set up].
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(1) [Auth] Select the authentication method specified by your 
Internet service provider.
(2) [SMTP Auth] Set when the SMTP authentication is selected.
(3) [POP server name] Enter the POP server name. (Up to 63 characters in 
single...

[NETWORK] menu
92 - ENGLISH
Settings
▶■Contents of mail sent
▶z
Example of E-mail sent when E-mail is set
The following E-mail is sent when the E-mail settings have been established.
▶zExample of E-mail sent for an error
The following E-mail is sent when an error has occurred. 

[NETWORK] menu
ENGLISH - 93
Settings
▶■[Command port set up] page
Set the port number used for command control.
Click [Detailed set up] 
→ [Command port set up].
(1)
(2)
(1) [COMMAND PORT]
Set the port number used for command control.
(2) [Set command port] Update the settings.
▶■[Change password] page
Click [Change password].
(1)
(2)
(3)
(1) [Administrator]
Used to change the setting of [Administrator].
(2) [User] Used to change the setting of [User].
(3) [Next] Used to change the setting of the...

[NETWORK] menu
94 - ENGLISH
Settings
 z[User] account
(1)
(2)
(3)
(5) (4)
(1) [Account]
Displays the account to change.
(2) [New] [User name] Enter the desired new user name. (Up to 16 characters in 
single byte)
(3) [New] [Password] Enter the desired new password. (Up to 16 characters in 
single byte)
(4) [New] [Password(Retype)] Enter the desired new password again.
(5) [OK] Determines the change of password.
 z[Change password] (For user rights)
Only the change of password is enabled under the user...

[NETWORK] menu
ENGLISH - 95
Settings
▶■[CRESTRON RoomV iew] page
You can monitor/control the projector using RoomView.
To display the operation page of RoomView from Web Control screen, access with the administrator rights is 
required. (The [CRESTRON RoomView] button is not displayed on the Web Control screen for user rights.)
When you click [CRESTRON RoomView], the RoomView operation page is displayed.
If Adobe Flash Player is not installed in your computer, or if the browser does not support Flash,...

[NETWORK] menu
96 - ENGLISH
Settings
▶z[Info] page
Click [Info] on the operation page.
(4)(5)
(6)
(7)
(1)
(2)
(3)
(8)
(1) [Projector Name]
Displays the name of the projector.
(2) [Mac Address] Displays the MAC address.
(3) [Lamp Hours] Displays the lamp usage time (converted value).
(4) [Power Status] Displays the status of the power.
(5) [Source] Displays the selected video input.
(6) [Lamp Mode] Displays the lamp mode.
(7) [Error Status] Displays the error status.
(8) [exit] Returns to the operation...

 and  indicators
ENGLISH - 97
Maintenance
 and  indicators
Managing the indicated problems
If a problem should occur inside the projector, the lamp indicator  and the temperature indicator  
will inform you.
Manage the indicated problems as follows.Attention
 z When switching of

f the power to deal with problems, make sure to follow the procedure in “Switching of f the 
projector” (
 page 38).
Note
 z Check the status of the power supply with the power indicator . (
 page 36)...

 and  indicators 
98 - ENGLISH
Maintenance
▶■Temperature indicator 
Indicator 
status
 z Illuminates red during projection.
(The message [REFER 

TO THE “TEMP indicator” SECTION IN THE OPERATION MANUAL.] 
is displayed on the projection screen.)
 z Flashing red when the power is turned of

f (projection stops automatically).
Problem The temperature inside and/or outside the projector is abnormally high.
Cause
 z Is the ventilating 
p

ort (intake/exhaust) 
blocked?
 z Is the room 
temperature too 
high?...

Maintenance/replacement
ENGLISH - 99
Maintenance
Maintenance/replacement
Before maintaining/replacing the unit
 zMake sure to turn of
f the power before maintaining or replacing the unit. ( pages 35, 38)
 zWhen turning of

f the power, make sure to follow the procedures in “Switching off the projector” (
 page 38).
Maintenance
▶■ Outer case
Wipe off dirt and dust with a soft, dry cloth.
▶z
If the dirt is persistent, soak the cloth with water and wring it thoroughly before wiping. Dry of
f the projector...

Maintenance/replacement 
100 - ENGLISH
Maintenance
2) Pull out the air filter unit.
▶zHold the grips on the air filter unit and pull out the air filter unit from the projector
.
Air filter unit
Grips (arrow engra\vve\f)
• After removing the air filter unit, remove any large build ups of dirt or dust in the air filter unit bay and the 
air intake port on the projector
.
3) Clean the air filter unit.
▶zVacuum dirt and dust from the air filter unit.
4) Attach the air filter unit to the projector
.
▶zPerform...