Panasonic Network Camera Management SystemKx Hgw600 Operating Instructions

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 51
Setup
2.Click the desired image field.
The Network Camera screen appears on another web page.
If the image field on the Camera Portal page does not appear
 Make sure the indicators light green.
 The proxy server setting of your web browser may be needed to access the
Camera Portal page ( Page 126).
 Make sure the modem is turned on first, next the KX-HGW600, then the PC. 
						

							Operating Instructions
52 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 53
Recording
/Playback
Section 3
Recording/Playback 
						

							Operating Instructions
54
3.1 Recording/Playback
Recording/Playback functionallows you to record and play back the selected Network
Camera screen using an SD memory card (customer provided).
The Recording/Playback function is designed for a single user.
For the operation by multiple users, this function may not work properly.
3.1.1 Preparing for recording
1.Pushing the cover, open the SD memory card slot.
2.Insert the SD memory card into the SD memory card slot and close the cover.
Note
When you remove the SD memory card, stop recording or playing back.
Ta b
Insert the SD memory card
until you hear a click.
To remove, push it gently.Press it until
you hear a click.Align a tab with a groove. 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 55
Recording
/Playback
3.Access the Camera Portal page from the PC accessible to the KX-HGW600.
For more information about the access to the Camera Portal page, please refer
to Page 36, Page 50 and Page 78.
4.Click[Recording/Playback].
The authentication window appears.
5.Enter KX-HGW (default setting) in thePassworddata field.
Leave theUser Namedata field blank (default setting).
Note
You can change the user name and password on the Setup Page. Please refer
to Change Password on Page 110.
6.Click[OK].
The Recording window appears ( Page 56).
Note
Please refer to Page 65 to format the SD memory card. 
						

							Operating Instructions
56
3.1.2 Recording/Playback page
Recording/Playback pageallows you to view and record the Network Camera screen
registered on the Camera Portal page.
Notes
 The Recording/Playback function is designed for a single user.
For the operation by multiple users, this function may not work properly.
 To access the Recording/Playback page from the WAN (Internet) side, please refer
to To access the Setup Page or Recording/Playback page from the WAN side on
Page 81.
1.Click[Recording/Playback]on the Setup Page or the Camera Portal page.
Functions:
Camera Portal:
Setup Page:Jumping to the Camera Portal page
( Page 36 and Page 50)
JumpingtotheSetupPage( Page68)
Recording/Playback:
Recording: Recording the Network Camera screen registered on the
Camera Portal page ( Page 57)
Recording Setup: Setting the Image Resolution, Image Quality and Frame
rate of the recorded image ( Page 58)
Timer Rec Setup: Setting the camera name and the recording time
( Page 59)
Playback: Playing back the recorded image ( Page 61)
SD Memory Card:
File Delete: Deleting the files in your SD memory card ( Page 64)
Format: Formatting your SD memory card ( Page 65)
Status: Checking the status of your SD memory card
( Page 65)
12
56
34
789
1
2
3
4
5
6
7
8
9 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 57
Recording
/Playback
3.1.3 Recording
Recording windowallows you to record the Network Camera screen on the Camera
Portal page.
Note
If the ID and password are set on the Security: Administrator window of Network
Camera, you have to enter the same ID (user name) and password on the Camera
Setup window of the KX-HGW600 ( Page 73).
1.Click[Recording]on the Recording/Playback page.
2.Click[REC]on the Recording window.
The recording starts. To stop recording, click[Stop]. 
						

							Operating Instructions
58
3.1.4 Recording Setup
Recording Setup windowallows you to set the Image Resolution, Image Quality and
Frame rate of the recorded image.
1.Click[Recording Setup]on the Recording/Playback page.
2.SelectImage Resolution,Image QualityandFrame ratefrom each drop-down
menu.
3.Whenyouhavefinished,click[Save]. The settings will be saved and a Success
message appears on the display.
Instructions for the data fields
* Frame rate changes with the condition of a network.Image ResolutionSelect 640 x 480, 320 x 240 or 160 x 120.
Image QualitySelect Favor clarity, Standard or Favor motion.
 Favor clarity: Optimized for good clarity
 Standard: Standard performance
 Favor motion: Optimized for motion display
Frame rate*Select Motion Image or Still Images (60 frames per minute
[1 frame per second] to 1 frame per hour).
 Motion Image: Recording the motion image
 Still Images: Recording the still images
Please refer to Recording Duration Information on Page 137
for more information. 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 59
Recording
/Playback
3.1.5 Timer Recording Setup
Timer Recording Setup windowallows you to set the camera name and the recording
time.
Notes
 When you change the timer recording settings, disable the previous settings and
save. Then set the new timer settings.
 Timer Recording settings are available only for a single Network Camera.
 The date and time of recorded images synchronize the Network Camera internal
clock. Confirm the date and time settings of the Network Camera.
1.Click[Timer Rec Setup]on the Recording/Playback page. 
						

							Operating Instructions
60
2.SelectCamera Namefrom the drop-down menu.
For confirmation, the image appears.
The image resolution differs from the settings on the Recording Setup window.
3.SelectEnableorDisable.
Note
The KX-HGW600 has two timer settings.
4.Check the desired day of the week.
If the setting time passes over midnight, please check the day of start time.
The start and end time is set only in 24h time mode.
5.Set the start and end time.
6.Whenyouhavefinished,click[Save]. The settings will be saved and a Success
message appears on the display.
When the Network Camera is reserved for the timer recording, the[REC]button
is changed to[Reserved].The[REC]buttons of the other Network Cameras are
displayed as[Timer].
Note
Do not overlap the timer settings betweenTimer 1andTimer 2.
Overlapped timer settings cause you to stop recording.
Start
9 : 00 12 : 00Timer 1End
Start
9 : 00 12 : 00Timer 1End
Start
10 : 00 15 : 00Timer 2End
Start
13 : 00 15 : 00Timer 2EndGood
example
Bad
example