Home
>
Panasonic
>
Camera
>
Panasonic Network Camera Management SystemKx Hgw600 Operating Instructions
Panasonic Network Camera Management SystemKx Hgw600 Operating Instructions
Have a look at the manual Panasonic Network Camera Management SystemKx Hgw600 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 142
Operating Instructions
142
About Network Camera Setup
Problem Cause and Remedy
The Automatic Setup function
does not work. Make sure the connection between the device and
the KX-HGW600 have been successfully made.
The Automatic Setup function is only available for
20 minutes after the Network Camera is turned on.
Restart the Network Camera.
Make sureEnableis checked on the Network
window of Network Camera ([Network] 1.
Network Configuration from the Setup
Program).
If you connect the KX-HGW600 to...](http://img.usermanuals.tech/thumb/58/66645/w64_kx-hgw600_en_om_d-141.png "Page 142
Operating Instructions
142
About Network Camera Setup
Problem Cause and Remedy
The Automatic Setup function
does not work. Make sure the connection between the device and
the KX-HGW600 have been successfully made.
The Automatic Setup function is only available for
20 minutes after the Network Camera is turned on.
Restart the Network Camera.
Make sureEnableis checked on the Network
window of Network Camera ([Network] 1.
Network Configuration from the Setup
Program).
If you connect the KX-HGW600 to...")
![Page 143
Operating Instructions
[For assistance, please call: 1-800-272-7033] 143
Specification and
Troubleshooting
About Network Camera Setup
Problem Cause and Remedy
You cannot view the manually
registered Network Camera. To set up your Network Camera manually, please
set up the Screen Assignment ( Page 77) window
and Por t Forwarding ( Page 94)/NAT (IP
unnumbered) ( Page 96) window for the IP
address of the Network Camera.
If you restart the manually registered Network
Camera, the setting may be changed by...](http://img.usermanuals.tech/thumb/58/66645/w64_kx-hgw600_en_om_d-142.png "Page 143
Operating Instructions
[For assistance, please call: 1-800-272-7033] 143
Specification and
Troubleshooting
About Network Camera Setup
Problem Cause and Remedy
You cannot view the manually
registered Network Camera. To set up your Network Camera manually, please
set up the Screen Assignment ( Page 77) window
and Por t Forwarding ( Page 94)/NAT (IP
unnumbered) ( Page 96) window for the IP
address of the Network Camera.
If you restart the manually registered Network
Camera, the setting may be changed by...")
![Page 144
Operating Instructions
144
About Recording/Playback function
Problem Cause and Remedy
You cannot record the
Network Camera screen. Make sure the connection between the Network
Camera and the KX-HGW600 have been
successfully made.
Make sure the SD memory card has been inserted
firmly into the SD memory card slot.
Administrator OnlyischeckedontheSecurity:
Administrator window of Network Camera
([Security: Administrator] 1. Authentication
Enable). In this case, enter the ID (user name) and
password of...](http://img.usermanuals.tech/thumb/58/66645/w64_kx-hgw600_en_om_d-143.png "Page 144
Operating Instructions
144
About Recording/Playback function
Problem Cause and Remedy
You cannot record the
Network Camera screen. Make sure the connection between the Network
Camera and the KX-HGW600 have been
successfully made.
Make sure the SD memory card has been inserted
firmly into the SD memory card slot.
Administrator OnlyischeckedontheSecurity:
Administrator window of Network Camera
([Security: Administrator] 1. Authentication
Enable). In this case, enter the ID (user name) and
password of...")
![Page 145
Operating Instructions
[For assistance, please call: 1-800-272-7033] 145
Specification and
Troubleshooting
About Other Troubles
Problem Cause and Remedy
The system has detected a
conflict for IP address with
the system having hardware
address
XX:XX:XX:XX:XX:XX or
Another device on your TCP/
IP Internet, which has the
physical address
XX:XX:XX:XX:XX:XX, is
currently using the same IP
address
(XXX.XXX.XXX.XXX). Your
TCP/IP network interface has
been shut down. is displayed
in the dialog box. Turn off all...](http://img.usermanuals.tech/thumb/58/66645/w64_kx-hgw600_en_om_d-144.png "Page 145
Operating Instructions
[For assistance, please call: 1-800-272-7033] 145
Specification and
Troubleshooting
About Other Troubles
Problem Cause and Remedy
The system has detected a
conflict for IP address with
the system having hardware
address
XX:XX:XX:XX:XX:XX or
Another device on your TCP/
IP Internet, which has the
physical address
XX:XX:XX:XX:XX:XX, is
currently using the same IP
address
(XXX.XXX.XXX.XXX). Your
TCP/IP network interface has
been shut down. is displayed
in the dialog box. Turn off all...")
![Page 147
Operating Instructions
[For assistance, please call: 1-800-272-7033] 147
Specification and
Troubleshooting
CAUTION
To comply with FCC RF exposure requirements in uncontrolled environment:
This equipment must be installed and operated in accordance with provided
instructions and a minimum 20 cm (8″) spacing must be provided between
antenna and all persons body (excluding extremities of hands, wrist and feet)
during wireless modes of operation.
This transmitter must not be co-located or operated in...](http://img.usermanuals.tech/thumb/58/66645/w64_kx-hgw600_en_om_d-146.png "Page 147
Operating Instructions
[For assistance, please call: 1-800-272-7033] 147
Specification and
Troubleshooting
CAUTION
To comply with FCC RF exposure requirements in uncontrolled environment:
This equipment must be installed and operated in accordance with provided
instructions and a minimum 20 cm (8″) spacing must be provided between
antenna and all persons body (excluding extremities of hands, wrist and feet)
during wireless modes of operation.
This transmitter must not be co-located or operated in...")
Operating Instructions 151 Readme 113 Recording 56, 57 Recording Duration Information 137 Recording Setup 58 Recording/Playback 54 Restart 114 RESTART button 12, 124 RJ-45 connector 19, 138 S Screen Assignment 77 SD memory card 54, 64 SD memory card slot 12, 54 Security 9, 128 SetupPage68 Specification 138 SSID (Service Set IDentifier) 83, 84, 128 Static Connection 27, 45 Static DHCP 107 Static NAT 96 Status 65, 118 Straight cable 20, 34, 40, 48 Subnet Mask 106, 130 Support 121 System Requirements 10 T TCP/IP 10, 129 Timer Recording Setup 59 Troubleshooting 140 U Update Firmware 112 Usage Data 118 User Registration 120 W Wall mounting 125 WAN indicator 12, 13 WAN jack 12, 19, 39 Web browser 10, 126 Wireless card 17, 38 Wireless communication 83, 84, 85 WIRELESS indicator 12, 13 Wireless LAN 138 Wireless network 9, 84, 86, 128 Wireless Setup 83
Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America Printed in JapanPQQX13424YAKK0802MN1013 2002 Panasonic Communications Co., Ltd. All Rights Reserved. Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. Carefully pack your unit, preferably in the original carton. Attach a letter, detailing the problem, to the outside of the carton. Symptom Operating Instructions are subject to change without notice. Send the unit to an authorized servicenter, prepaid and adequately insured. Do not send your unit to the Panasonic Consumer Electronics Company listed below or to executive or regional sales offices. These locations do not repair consumer products. When you ship the product Panasonic Servicenters are listed in the servicenter directory. Call 1-800-272-7033 for the location of an authorized servicenter. After the limited warranty, please contact our Continued Services Technical Support Line at 1-900-555-PANA (1-900-555-7262). If you have difficulty reaching this number, it may be blocked by your phone company. Please contact your local phone company to correct this. For product service Copyright:This manual is copyrighted by Panasonic Communications Co., Ltd. (PCC). Under the applicable copyright laws, this manual may not be reproduced in any form, in whole or part, without the prior written consent of PCC and its licensee.