Panasonic Network Camera Management SystemKx Hgw600 Operating Instructions

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 131
Technical
Guides
5.7 PPPoE Connection (IP unnumbered)
When PPPoE Connection (IP unnumbered) using multiple global IP addresses is used
to connect to the Internet , the KX-HGW600 assigns each private IP address to the
Network Camera and PC on the LAN side. NAT (IP unnumbered) function translates the
global IP address to the private IP address.
To translate the global IP addresses xxx.yyy.zzz.100/29 (xxx.yyy.zzz.100-
xxx.yyy.zzz.107) to the private IP address:
PPPoE Connection (IP unnumbered)
IP Address (WAN)None
IP Address (LAN)192.168.0.254
IP Address
(KX-HGW600)xxx.yyy.zzz.101
Network Address192.168.0.100
Network Camera or
PCxxx.yyy.zzz.102 192.168.0.41
xxx.yyy.zzz.103 192.168.0.42
xxx.yyy.zzz.104 192.168.0.43
xxx.yyy.zzz.106 Use IP Masquerade function to connect
the Network Camera to the KX-HGW600
Broadcast Addressxxx.yyy.zzz.107
xxx.yyy.zzz.101
192.168.0.254
IP address (LAN)
192.168.0.41 xxx.yyy.zzz.102xxx.yyy.zzz.103
192.168.0.42xxx.yyy.zzz.104
192.168.0.43xxx.yyy.zzz.106
Global IP address for
IP Masquerade function
Internet
Web server 
						

							Operating Instructions
132
 Address Translation NAT (IP unnumbered)Setting items Description
Basic Setup
IP address of
KX-HGW600
Address Translation
NAT (IP unnumbered)xxx.yyy.zzz.101
Use
Translate the global IP address to the private IP address
according to the network condition.
Optional Setup
IP Address (LAN)
DHCP192.168.0.1
When you build a web server on the LAN side, set the IP
address of the corresponding server manually or checkUse
check box of the DHCP Server and then enter the static IP
address in theStatic DHCPsetting. 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 133
Specification and
Troubleshooting
Section 6
Specification and Troubleshooting 
						

							Operating Instructions
134
6.1 Default setting list
Authentication window (Password for Setup Page and Recording/Playback page)
Basic setup
Camera Setup
Wireless Setup
Address TranslationUser Name
PasswordNone
KX-HGW
Internet ConfigurationDHCP Connection
Other setting items[Blank]
Camera Entry
Automatic SetupUse
Screen Assignment
Screen FormatCamera Name and Still Image
(refreshing)
Access ControlRestricted Access
Basic
SSID
Blanked SSID connection
ChannelHGW600
Per mit
1
EncryptionDisabled
MAC Address FilteringDo Not Use
Enabled/DisabledUse
Port Forwarding[Blank]
NAT (IP unnumbered)[Blank] 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 135
Specification and
Troubleshooting
Packet Filtering
No.
Type DirectionSource Destination
ProtocolLog
Output
IP Address Port IP Address Port
1
Permit W L KX-HGW600 80 TCP Y
53
Pe r m i t W L10.0.0.0 -
10.255.255.255TCP&UDP Y
54
Pe r m i t W L172.16.0.0 -
172.31.255.255TCP&UDP Y
55
Pe r m i t W L192.168.0.0 -
192.168.255.255TCP&UDP Y
56
Pe r m i t L W10.0.0.0 -
10.255.255.255TCP&UDP Y
57
Pe r m i t L W172.16.0.0 -
172.31.255.255TCP&UDP Y
58
Pe r m i t L W192.168.0.0 -
192.168.255.255TCP&UDP Y
59
Permit W L KX-HGW600 TCPEST Y
60
Permit W L TCPEST Y
61
Pe r m i t W L137
-
139TCP&UDP Y
62
Pe r m i t W L137
-
139TCP&UDP Y
63
Pe r m i t L W137
-
139TCP&UDP Y
64
Pe r m i t L W137
-
139TCP&UDP Y
No. Description
1 Prohibit the access from the WAN side to the Camera Portal page on
the KX-HGW600.*
53-55 Drops the invalid packet from the WAN side. (When the packet from the
WAN side has a source private IP address)
56-58 Prevents the invalid access to the WAN side. (When the packet from the
LAN side has a destination private IP address) 
						

							Operating Instructions
136
* You cannot change, delete and move the entry number 1 because it is used on
the Access Control Window.
Optional Setup
Recording/Playback 59 Prevents the invalid access from the WAN side to the KX-HGW600.
(When TCP packet from the WAN side cannot communicate with the
KX-HGW600)
60 Prevents the invalid access from the WAN side to the LAN side.
(When TCP packet from the WAN side cannot communicate with the
device on the LAN side)
61-64 Prevents the intrusion and leak of NBT (NetBIOS over TCP/IP) packet.
IP Address (LAN)
IP Address (LAN)
Subnet Mask
Por t No. of WWW ser ver192.168.0.254
255.255.255.0
80
DHCP
DHCP Server
Available Address Range
Static DHCPUse
192.168.0.1-192.168.0.128
Disabled
PPPoE
Connection
Disconnection on IdleAlways
Enabled (30 min.)
DNS RelayUse
Dynamic Routing
WAN
LANDo Not Send
Send
Recording Setup
Image Resolution
Image Quality
Frame rate320x240
Standard
Motion Image
Timer Recording SetupDisable 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 137
Specification and
Troubleshooting
6.2 Recording Duration Information
For the Frame rate setup ( Page 58), please refer to the table below.
Recording Duration of Motion Images (5 frames/second, Image Quality: Standard)
Recording Duration of Still ImagesCard TypeImage Resolution
Approx. time
640 X 480
26KB/frameApprox. time
320 X 240
13KB/frameApprox. time
160 X 120
4KB/frame
512MB67 min 134 min 436 min
256MB33 min 67 min 218 min
128MB16 min 33 min 109 min
64MB8min 16min 54min
32MB4min 8min 27min
16MB2min 4min 13min
Frame Rate Card TypeImage Resolution
640 X 480
26KB/frame320 X 240
13KB/frame160 X 120
4KB/frame
6 frames/
minute
(1 frame/
10 seconds)512MB
3360 min 6720 min 21850 min
256MB
1680 min 3360 min 10920 min
128MB
840 min 1680 min 5460 min
64MB
420 min 840 min 2730 min
32MB
210 min 420 min 1370 min
16MB
110 min 210 min 680 min
1 frames/
hour512MB
840 days 1680 days 5460 days
256MB
420 days 840 days 2730 days
128MB
210 days 420 days 1370 days
64MB
110 days 210 days 680 days
32MB
50 days 110 days 340 days
16MB
30 days 50 days 170 days 
						

							Operating Instructions
138
6.3 Specification
KX-HGW600 Specification
Item Description
Ethernet Interface
(WAN)Port: 10Base-T Ethernet RJ-45 connector x 1
Protocol: IEEE 802.3 (10Base-T)
Speed: 10 Mbps
Data communications mode: Half duplex/Full duplex (automatic
identification)
Ethernet Interface
(LAN)Ports: 10Base-T/100Base-TX Ethernet RJ-45 connector x 4
Protocol: IEEE 802.3 (10Base-T), IEEE 802.3u (100Base-TX)
Speed: 10/100 Mbps (automatic negotiation)
Data communications mode: Half duplex/Full duplex (automatic
identification)
MDI/MDI-X: automatic detection
Wireless LAN
InterfaceData communications mode: DS-SS, Half duplex
Protocol: IEEE 802.11b
Speed: 11/5.5/2/1 Mbps
Frequency: 2412-2462 MHz (Center Frequency)
Channel: 11channels
Security: 40(64)/128 bit (WEP)
Communications distance (depending on ambient conditions):
The following values provide an indication of the communication
with the KX-HCM270.
120 m (400 feet) indoors, 600 m (2000 feet) outdoors at 1 Mbps
LED DisplayPOWER, WAN, LAN 1—4, WIRELESS
ButtonFACTORY DEFAULT RESET, RESTART
EnvironmentalOperation temperature: +5°Cto+40°C(+41°Fto+104°F)
Humidity: 45% to 85% (No Condensation)
Dimension (HWD)42 mm (1.65″)×260 mm (10.2″)×150 mm (5.9″)
(Folding the antenna)
Weight515 (1.1 lb.)
PowerAC adaptor: Input 120 V AC, 60 Hz
Output 12 V DC, 1A
Consumption: 8W (Max.) 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033] 139
Specification and
Troubleshooting
Other Specifications
* These settings change with the condition of a network.Item Description
RouterProtocol: PPPoE/DHCP/Static/PPPoE (IP unnumbered)
PPP Authentication: Automatic
PPPoE Connection: Manual/Automatic/Always
RIP: RIPv1
DHCP Server: Up to 128 clients
DNS Relay
Packet Filtering: Up to 64 entries
Address Translation: IP Masquerade, Port Forwarding, Static
NAT
Wireless NetworkSecurity: Encryption (WEP 40(64)/128 bit)/SSID/MAC Address
Registration
Simultaneous
number of accessCamera Portal page: Multiple users*
Recording/Playback page: Single user
Access ControlUser Name/Password
Recording/
Playback*Image Resolution: 160 x 120, 320 x 240, 640 x 480
Image Quality: Favor motion, Standard, Favor clarity
Frame rate: Motion Image, Still Image (60 frames per minute
[1 frame per second] — 1 frame per hour)
Others Web browser configuration
 Update Firmware feature 
						

							Operating Instructions
140
6.4 Troubleshooting
About KX-HGW600 Connection
About WWW Site Problem Cause and Remedy
The POWER indicator lights
red. The KX-HGW600 hardware is in a bad status. Push
the RESTART button ( Page 124) or contact our
customer call center.
The CATV/xDSL/optical cable
modem network does not
work and the WAN indicator
does not light.
 Make sure the connection between the KX-HGW600
and the modem has been successfully made.
 Make sure the KX-HGW600 and the modem have
been turned on.
The Ethernet network does
not work and the LAN 1—4
indicators do not light. Make sure the connection between the PC and the
KX-HGW600 have been successfully made.
 Make sure the KX-HGW600 is turned on first, then
the PC.
 Install a network card and software properly on the
PC.
Problem Cause and Remedy
A WWW site does not
appear. Make sure the address of the WWW site has been
correctly entered in the address field of the web
browser.
 Make sure the KX-HGW600 is connected properly
to the modem or PC.
 Confirm the information on your Internet
configuration provided by your ISP. If you are
required to enter some network parameters, refer to
Setting up Internet Configuration on Page 25 and
set the network parameters to the KX-HGW600.
 Check the Status window ( Page 118) on the
Setup Page. From the Status window, make sure
the KX-HGW600 is assigned an IP address from the
ISP. If it isn’t, refer to Setting up Internet
Configuration on Page 25 and set the network
parameters to the KX-HGW600.
 Check the proxy server use ( Page 126).
 If you turn off the KX-HGW600 while accessing the
Internet with PPPoE Connection and then trying to
access again, it may take for about 5 to 20 minutes.
Wait for a second.
 If the switch of the modem is set to 100 Mbps, the
communication between the modem and the
KX-HGW600 (WAN jack) may not be made properly.
Change the switch of the modem to 10 Mbps.