Panasonic Multi-Function Printer KX-MB2000 KX-MB2010 KX-MB2030 Operating Instructions

Feature/CodeSelectionSetting the ring pattern for fax
(Distinctive Ring feature)
MBNM 4NM 3NM 1NM1 N “ A ”
M 2 N “ B ”
M 3 N “ C ”
M 4 N “ D ”
M 5 N “ B-D ” (default)
See page 53 for details.Setting auto reduction
feature
M B NM4NM 3NM 2NTo receive a fax document that is longer than your recording paper.
M 0 N “ OFF ”: The unit will print received documents at their original size.
M 1 N “ ON ” (default): The unit will fit received documents onto your recording
paper.Changing the fax activation
code
M B...

Feature/CodeSelectionReceiving a fax into the
computer
M B NM4NM 4NM 2NIf you wish to receive a fax into a computer, activate this feature and run  [PC
FAX]  from Multi-Function Station.
This feature is available when the fax preview mode is turned OFF (feature #448
on page 50).
M 0 N “ OFF ” (default): Deactivates this feature.
M 1 N “ ALWAYS ”: If the unit recognizes the connection to the computer, it will
transfer received documents to the computer. If the unit cannot recognize the
connection, it will...

9.4 Copy featuresFeature/CodeSelectionSetting the input tray to use
for copy
M B NM4NM 6NM 0NM1 N “ #1 ” (default): The paper input tray is selected. The displayed paper size
depends on the recording paper size setting (feature #380 on page 57).
M 2 N “ #2 ”: The manual input tray is selected. The displayed paper size depends
on the recording paper size setting (feature #381 on page 57).Changing the default copy
resolution
M B NM4NM 6NM 1NTo change the default resolution setting for copying.
M 1 N “...

9.5 PC print featuresFeature/CodeSelectionChanging the data timeout
setting
M B NM7NM 7NM 4NThe unit will automatically print the remaining data in memory when the
computer does not send data to the unit during the set time.
1. MMenu N A  M B NM7NM 7NM 4N A  M Set N
2. Enter the desired data timeout setting from  “005 ” seconds to  “600 ”
seconds, using the dial keypad.
R The default setting is  “060 ” seconds.
3. MSet N A  M Menu NSetting mutual A4/letter print
M B NM7NM 7NM 6NThis feature allows...

9.6 Scan featuresFeature/CodeSelectionSetting the scan mode for
Push Scan
M B NM4NM 9NM 3NM1 N “ VIEWER ” (default): The scanned image will be displayed in the
[Multi-Function Viewer]  window.
M 2 N “ FILE ”: The scanned image will be saved as a file.
M 3 N “ EMAIL ”: The scanned image will be saved for email attachment.
M 4 N “ OCR ”: The scanned image will be displayed in the OCR window.
M 5 N “ EMAIL ADDRESS ”: The scanned image will be sent as an attachment
without using email software.
M 6 N “ FTP...

Feature/CodeSelectionRegistering the scan to email
address destinations (LAN
connection only)
R This feature can be
programmed only through
the web browser interface.When you send scanned files as email attachments directly from this unit, you
can register email destinations (up to 30 destinations) for the unit through the
web browser interface in advance.
1. Start Multi-Function Station.
2. [Utilities]  A  [Configuration Web Page]  A  [Device Configuration]
3. Type  “root”  as the user name, then enter...

9.7 LAN featuresFeature/CodeSelectionLAN setting with a DHCP
server
M B NM5NM 0NM 0NM0 N “ DISABLED ”: Deactivates this feature.
M 1 N “ ENABLED ” (default): The following will be allocated automatically using a
DHCP (Dynamic Host Configuration Protocol) server.
– IP address
– Subnet mask
– Default gatewaySetting the IP address for the
LAN connection
M B NM5NM 0NM 1NThis feature is available when feature #500 is deactivated.
1. MMenu N A  M B NM5NM 0NM 1N A  M Set N
2. Enter the IP address of the unit on...

Feature/CodeSelectionApproving users for the LAN
connection
M B NM5NM 3NM 2NM0 N “ DISABLED ” (default): Deactivates this feature.
M 1 N “ ENABLED ”: The unit will deny/approve access from the pre-programmed
IP patterns. You can program whether to deny or approve IP addresses. Up to
4 patterns each for IPv4 and IPv6 can be programmed through the web browser
interface.
1. Start Multi-Function Station.
2. [Utilities]  A  [Configuration Web Page]  A  [Network Configuration]
3. Type  “root”  as the user...

Feature/CodeSelectionErasing all email addresses,
FTP destinations, and SMB
folder destinations stored in
the unit
M B NM5NM 7NM 8NM0 N “ NO ” (default)
M 1 N “ YES ”
R Disconnect the telephone line cord (KX-MB2030 only), USB cable and LAN
cable before activating this feature.
To erase all email addresses:
1. MMenu N A  M B NM5NM 7NM 8N
2. Press  M1 N to select  “YES ”.  A  M Set N
3. Press  M1 N to select  “YES ”.  A  M Set N A  M Menu N
To erase FTP destinations:
1. MMenu N A  M B NM5NM 7NM 8N
2. Press...

9.8 Network features (LAN connection only)
These features can be programmed through the web browser interface.FeatureTabSelectionSetting the LAN features[LAN FEATURE]Enter the LAN feature settings. See page  67 for details.Setting the community
name for SNMP[SNMP]Enter the SNMP community name. Consult your service
provider or network administrator for details.Setting the location
where you use this unit[SNMP]Enter the location information of the unit.Displaying the link local
address for IPv6[IPv6]The...