Panasonic Matrix Switcher Wj Sx650p Operating Instructions

61
Note:When you use WJ-HD300 Series, start playback
before pressing the GO TO LAST button.
 WV-CU360C/CJ
This operation is not available.
 Recorder Control End
Note:Before this operation, stop playback or search play-
back surely.
To finish recorder control, select a camera.
The monitor display will become the status before recorder
control.
 Recorder Selection
Before recorder control procedures not described in this
chapter, you need to select a recorder in advance. In the
following example, you...

62
 Descriptions of Sequence
Sequence is the function to switch camera images automatically.
There are two sequences:
•Tour sequence
•Group sequence
 Tour Sequence
Camera images are displayed on a selected monitor, and they are sequentially switched according to the setting. 
•Up to 32 tour sequences can be registered.
•Up to 64 steps can be set for a tour sequence.
 Group Sequence
Camera images are displayed on two or more monitors, and they are sequentially switched according to the setting. 
•Up to...

63
Setting item
LCN (Logical Camera Number) 
Preset
AUX1/2
DwellParameter Remarks
1 to 999
1 to 256
ON, OFF, - -
1 to 30 secCamera position numbers are also avail-
able for parameters. (CAM-P)
–
Dwell time to display each camera
image
(Group preset has no sequence steps,
and Dwell setting is not available.)
 Sequence Setting
Sequence setting is performed in Sequence of WJ-SX650 Series  Administrator Console. The following settings are available
for each sequence step.
Note:Preset and AUX1/2 will not be...

64
 Tour Sequence
WV-CU950/650
1. Enter the desired sequence number by pressing the
numeric buttons. The entered number will appear on
the LCD.
2. Press the TOUR SEQ button. The tour sequence will be
activated.
 WV-CU360C/CJ
1. Enter the desired sequence number by pressing the
numeric buttons. The entered number will appear on
the LED display.
2. Press the TOUR SEQ button. The tour sequence will be
activated.
 Group Sequence/Preset
WV-CU950/650
1. Select a monitor assigned for desired group...

65
 Sequence Pause
You can pause an active tour or group sequence. When a
group sequence is paused on a monitor, all sequences will
be simultaneously paused on other monitors.
1. Press the SEQ PAUSE*
1(or PAUSE*2) button.
Sequence will be paused.
2. Press the SEQ PAUSE*
1(or PAUSE*2) button again to
restart the sequence.
*
1WV-CU950/650
*2WV-CU360C/CJ
Available operations during sequence pause
•Sequence step forward/backward
You can move the sequence one frame to the next or
previous step by pressing...

66
ALARM DESCRIPTIONS
Alarm Occurrence
When this unit accept an alarm input signal (terminal alarm, camera alarm, recorder alarm, serial alarm, or video loss), an
alarm event (tour sequence, etc.) is activated automatically. Each alarm input signal is associated with an alarm event setting.
(The setting activates the alarm input signal and alarm event.) Up to 1 024 alarm event settings are available. The alarm event
setting is performed in Alarm – Alarm Event of WJ-SX650 Series  Administrator Console....

67
Alarm Modes
The following alarm modes (Display Mode settings) are
available. (Alarm mode follows the setting of Display
Mode.)
Spot
The image of associated camera will be displayed on the
monitor. Preset position or auxiliary control will be activated.
The following alarm modes (=patterns to display alarm pic-
tures on a monitor) are available. (Regardless of alarm
modes, alarms occur to all the associated cameras.) The
alarm mode setting is performed in Alarm – Alarm Mode
of WJ-SX650 Series...

68
ALARM CONTROL
Alarm Acknowledgement (ACK)
By acknowledging an alarm occurrence on an associated
monitor, you can control alarm pictures.
WV-CU950/650
While a monitor in the alarm mode status is selected, press
the ACK button. (During the alarm mode status, Alarm
sign is blinking on the LCD.)
The alarm event will be acknowledged. (Alarm sign will
change to steady light.)
WV-CU360C/CJ
While a monitor in the alarm mode status is selected, press
the ACK button. (During the alarm mode status, the alarm...

69
*1WV-CU950/650
*2WV-CU360C/CJ
Notes:
•Alarm all reset will also be conducted when setting
changes are performed in SETUP MENU or WJ-SX650
Series Administrator Console.
•To reset the alarms occurred to recorders, perform
alarm all reset. Alarm all reset is available even while no
alarms are occurring.
Return to Alarm Mode Status
You can recover from the ACK status to the alarm mode
status.
WV-CU950/650
Press the ACK button while holding down the SHIFT button. 
The alarm mode will be recovered....

70
• ACTION
POWER:The unit is powered on. (Highlighted: Power
off) 
M01 to 32:Alarm occurred to Monitor 1 to 32. (For
group sequence and group preset, the smallest
monitor number is displayed with ∗.)
C001 to C999:Camera 001 to Camera 999 was activat-
ed for spot mode.
T01 to 32:Tour Sequence 1 to 32 was activated.
G01 to 32:Group sequence (or Group preset) 1 to 32
was activated.
Notes:
•User ID and Controller information is displayed for
an alarm reset or suspended by an operator. (They
are not...