Panasonic Matrix Switcher Wj Sx650p Operating Instructions
Here you can view all the pages of manual Panasonic Matrix Switcher Wj Sx650p Operating Instructions. The Panasonic manuals for Recording Equipment are available online for free. You can easily download all the documents as PDF.
Page 91
91 Check item and remedy ReferenceProblem Cannot control a recorder. RECORDER ERROR is dis- played on the monitor, and recorder control is unavail- able. During sequence, black screen and NOT ASSIGNED are displayed on the monitor. Auxiliary control does not become OFF even after the sequence, timer event, or alarm event ends. Timer event or camera event is not activated. • Check the LCD (or LED) display or indicators of system con- troller. When Busy (or the BUSY indicator) is blinking (or lighting),...
Page 92
92 Check item and remedy ReferenceProblem Auto tracking ended before the end time of camera event setting. Alarm event does not occur. The image of camera associ- ated with the alarm event was not recorded. The status before the alarm occurrence is not recovered, even though the alarm event is reset. Alarm modes of connected devices are not reset even after the unit is powered off. Cannot open SETUP MENU of the unit. • Check if another camera event is not set for the camera. • Check if the alarm input...
Page 93
93 WJ-SX650 Series Administrator Console Check item and remedy ReferenceProblem ! mark is displayed in the LCN entry field. • Check if the camera number not registered is set for the cam- era position, tour sequence, group sequence, timer event, alarm event, recorder, or camera input channel. Register the camera number in System – Logical Camera Number. – ! mark is displayed in the CAM-P (camera position) entry field. Cannot set Control to ON in System – Recorder. Cannot set the RS-485 port number of...
Page 94
94 The power cord insulation is damaged. The power cord, plug and connectors get hot during use. The power cord gets hot when bent or stretched. The power cord, plug and connectors are worn out. This may result in electric shock or a fire. Unplug the power plug from the AC outlet immediately, and refer to qualified service per- sonnel. – Check item and remedy ReferenceProblem Power Cord, Connectors, and Power Plug Check the power cord, connectors, and power plug regularly.
Page 95
95 SPECIFICATIONS Matrix Switcher WJ-SX650 Series Power Source: 120 V AC, 60 Hz Power Consumption: 60 W Ambient Operating Temperature:–10 °C to +50 °C {14 °F to 122 °F}* 1 Ambient Operating Humidity: Less than 90 % Video Input Board: x 1 Camera Input (CAMERA IN 1 to 32): 1 V [P-P]/75 Ω(BNC x 32), composite video signal 0.5 V [P-P]/75 Ωdata signal and 2.5 V [P-P]/75 Ωvertical timing pulse multi- plexed Video Output (VIDEO OUT 1 to 4): 1 V [P-P]/75 Ω(25-pin D-sub connector x 4)* 2, active loop-thru...
Page 96
96 Card Cage WJ-SX650U Power Source: 120 V AC, 60 Hz Power Consumption: 60 W Ambient Operating Temperature:–10 °C to +50 °C {14 °F to 122 °F}* 5 Ambient Operating Humidity: Less than 90 % Expansion slot: x 3 RS-485 (Camera) Port *6: 6-conductor modular jack x 12 (2-wire or 4-wire communication, with termination switches (MODE 1 to 4)) Extension Port (EXTENSION 1 IN, OUT): 6-conductor modular jack x 2 (With a termination switch (TERM: ON, OFF)) Extension Port (EXTENSION IN 2, 3): 37-pin D-sub connector x...
Page 97
97 *5In the constant operation*64 ports available with each Video Input Board WJ-PB65C32*7When this unit is powered off, this signal will not be output even with the acceptation of video input signal.*8Not available when the MODE switches are set as Video Output Board 2 Expansion Cable Kit WJ-CA65L20K/WJ-CA65L07K Video cable: 37-pin D-sub x 2 (WJ-CA65L20K: 2 m {6-3/5}, WJ-CA65L07K: 0.7 m {2-3/10}) Communication cable: 6-conductor modular x 1 2 m {6-3/5} D-sub/BNC Video Cable WJ-CA68 25-pin D-sub – BNC...
Page 98
Panasonic Canada Inc.5770 Ambler Drive,Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 http://www.panasonic.ca Panasonic Sales Company Division of Panasonic Puerto Rico Inc. San Gabriel Industrial Park 65th Infantry Ave. KM. 9.5 Carolina P.R. 00985(809)750-4300 Panasonic System Solutions Company, Unit Company of Panasonic Corporation of North America Security Systems www.panasonic.com/security For customer support, call 1.877.733.3689 Executive Office: Three Panasonic Way 2H-2, Secaucus, New Jersey...