Home > Panasonic > Recording Equipment > Panasonic Matrix Switcher Wj Sx650p Operating Instructions

Panasonic Matrix Switcher Wj Sx650p Operating Instructions

Here you can view all the pages of manual Panasonic Matrix Switcher Wj Sx650p Operating Instructions. The Panasonic manuals for Recording Equipment are available online for free. You can easily download all the documents as PDF.

Page 91

91
Check item and remedy ReferenceProblem
Cannot control a recorder.
RECORDER ERROR is dis-
played on the monitor, and
recorder control is unavail-
able.
During sequence, black
screen and NOT
ASSIGNED are displayed on
the monitor.
Auxiliary control does not
become OFF even after the
sequence, timer event, or
alarm event ends.
Timer event or camera event
is not activated.
• Check the LCD (or LED) display or indicators of system con-
troller. When Busy (or the BUSY indicator) is blinking (or
lighting),...

Page 92

92
Check item and remedy ReferenceProblem
Auto tracking ended before
the end time of camera event
setting.
Alarm event does not occur.
The image of camera associ-
ated with the alarm event was
not recorded.
The status before the alarm
occurrence is not recovered,
even though the alarm event
is reset.
Alarm modes of connected
devices are not reset even
after the unit is powered off.
Cannot open SETUP MENU
of the unit.
• Check if another camera event is not set for the camera.
• Check if the alarm input...

Page 93

93
WJ-SX650 Series Administrator Console
Check item and remedy ReferenceProblem
! mark is displayed in the
LCN entry field.
• Check if the camera number not registered is set for the cam-
era position, tour sequence, group sequence, timer event,
alarm event, recorder, or camera input channel. Register the
camera number in System – Logical Camera Number.
–
! mark is displayed in the
CAM-P (camera position)
entry field.
Cannot set Control to ON in
System – Recorder.
Cannot set the RS-485 port
number of...

Page 94

94
The power cord insulation is
damaged.
The power cord, plug and
connectors get hot during use.
The power cord gets hot when
bent or stretched.
The power cord, plug and connectors are worn out. This may
result in electric shock or a fire. Unplug the power plug from
the AC outlet immediately, and refer to qualified service per-
sonnel.
–
Check item and remedy ReferenceProblem
Power Cord, Connectors, and Power Plug
Check the power cord, connectors, and power plug regularly. 

Page 95

95
SPECIFICATIONS
Matrix Switcher WJ-SX650 Series
Power Source: 120 V AC, 60 Hz
Power Consumption: 60 W
Ambient Operating Temperature:–10 °C to +50 °C {14 °F to 122 °F}*
1
Ambient Operating Humidity: Less than 90 %
Video Input Board: x 1
Camera Input (CAMERA IN 1 to 32): 1 V [P-P]/75 Ω(BNC x 32), composite video signal 
0.5 V [P-P]/75 Ωdata signal and 2.5 V [P-P]/75 Ωvertical timing pulse multi-
plexed
Video Output (VIDEO OUT 1 to 4): 1 V [P-P]/75 Ω(25-pin D-sub connector x 4)*
2, active loop-thru...

Page 96

96
Card Cage WJ-SX650U
Power Source: 120 V AC, 60 Hz
Power Consumption: 60 W
Ambient Operating Temperature:–10 °C to +50 °C {14 °F to 122 °F}*
5
Ambient Operating Humidity: Less than 90 %
Expansion slot: x 3
RS-485 (Camera) Port
*6: 6-conductor modular jack x 12 (2-wire or 4-wire communication, with termination
switches (MODE 1 to 4))
Extension Port (EXTENSION 1 IN, OUT): 6-conductor modular jack x 2 (With a termination switch (TERM: ON, OFF))
Extension Port (EXTENSION IN 2, 3): 37-pin D-sub connector x...

Page 97

97
*5In the constant operation*64 ports available with each Video Input Board WJ-PB65C32*7When this unit is powered off, this signal will not be output even with the acceptation of video input signal.*8Not available when the MODE switches are set as Video Output Board 2
Expansion Cable Kit WJ-CA65L20K/WJ-CA65L07K
Video cable: 37-pin D-sub x 2 (WJ-CA65L20K: 2 m {6-3/5}, WJ-CA65L07K: 0.7 m {2-3/10}) 
Communication cable: 6-conductor modular x 1
2 m {6-3/5}
D-sub/BNC Video Cable WJ-CA68
25-pin D-sub – BNC...

Page 98

Panasonic Canada Inc.5770 Ambler Drive,Mississauga, 
Ontario, L4W 2T3 Canada (905)624-5010
http://www.panasonic.ca
Panasonic Sales Company
Division of Panasonic Puerto Rico Inc.
San Gabriel Industrial Park 65th Infantry Ave. KM. 9.5 Carolina
P.R. 00985(809)750-4300
Panasonic System Solutions Company, 
Unit Company of Panasonic Corporation of North America
Security Systems 
www.panasonic.com/security
For customer support, call 1.877.733.3689
Executive Office: Three Panasonic Way 2H-2, Secaucus, New Jersey...
Start reading Panasonic Matrix Switcher Wj Sx650p Operating Instructions

Related Manuals for Panasonic Matrix Switcher Wj Sx650p Operating Instructions

All Panasonic manuals