Panasonic Matrix Switcher Wj Sx650p Operating Instructions

51
Notes:
•ON is not available for recorders when camera input channels are set for RS-485 cameras. To activate recorder connec-
tions, delete the RS-485 camera settings. (Refer to p. 53.)
•For camera input channels to supply video input signal from recorders, set VD2 and DATA to OFF. The VD2 and DATA set-
tings are performed in VD2/DATA/CABLE COMPENSATION. (Refer to p. 53.)
•Set LCN parameters surely for these camera input channels, even though these channels accept video input signals from
recorders....

52
SYSTEM
You will perform the system settings required to transmit
data between the unit and connected devices. When you
select SYSTEM on the top menu, the following menu is dis-
played.
SYSTEM Menu
• DATA PORT
DATA PORT menu will be displayed. You will select the
DATA port types according to the connected devices.
• SERIAL PORT
Select the communication speed of SERIAL port. (The fac-
tory default is 38 400 bps.)
4 800 bps/9 600 bps/19 200 bps/38 400 bps
Other parameters (COMMUNICATION STATUS) are as...

53
VD2/DATA/CABLE COMPENSATION
Menu
• INPUT BOARD
Select a video input board from 1 to 8. (The factory default is 1.)
• VD2
Select ON or OFF. (The factory default is ON.)
ON:Sends the VD2 timing pulse with the camera output
signal.
OFF:Not sends the VD2 timing pulse with the camera out-
put signal.
• DATA
Select ON or OFF. (The factory default is ON.)
ON:Sends the control data with the camera output signal
via the coaxial cable.
OFF:Not sends the control data with the camera output
signal via the...

54
INFORMATION
You can check whether the connected video input or output
boards are working properly. When you select INFORMA-
TION on the top menu, the following menu is displayed.
• OUTPUT BOARD
You can check the version of video output boards currently
used.
• INPUT BOARD
∗ are displayed beside the boards currently used.
LANGUAGE
You can set the desired language display for SETUP
MENU.
On the top menu, move the cursor to LANGUAGE and
select the desired language. (Refer to p. 48 for the top
menu...

55
LOGIN AND LOGOUT
Operator Registration 
Before logging into the system, operator registration is required. Operator registration is performed in Operator – Operator of
WJ-SX650 Series  Administrator Console. The factory default of operator information is as follows.
•Operator No.:Number given for operator registration.
Up to 59 operators can be registered.
•User ID:ID number of operator controlling this unit. 1 to
99998 are available.
Note:Begin the entry with a numeric other than 0.
•Password:For...

56
Operation End (Logout)
You need to log out of the system:
•When finishing operations and powering off
•When changing an operator
 WV-CU950/650
During the login status, press the LOGOUT button while
holding down the SHIFT button.
The LCD returns to the login standby display.
 WV-CU360C/CJ
During the login status, press the LOG OUT button while
holding down the SHIFT button.
The LED display returns to the login standby display.
Operation Start/End (Auto
Login/Logout)
•To activate auto login or auto...

57
The following is the procedure examples for monitor opera-
tion. Refer to p. 73 Lists of Operations and Functions for
other monitor control procedures not described here. 
Monitor Selection
In the following procedure, you can display camera images
or perform setup procedures on a desired monitor. 
1. Enter the desired monitor number by pressing the
numeric buttons. The entered number will appear on
the LCD (or LED display).
 
2. Press the MON (ESC) button. The specified monitor will
be selected, and...

58
•When you select another camera or camera position,
the memorized steps are updated. 
•When you select another monitor, the memorized steps
will be cleared.
WV-CU360C/CJ
This operation is not available.
Preset Position Control
By entering preset position numbers, you can move cam-
eras to preset positions. Refer to p. 73 Lists of Operations
and Functions for how to register preset positions. 
1. Enter the desired preset position number by pressing
the numeric buttons. The entered number will appear...

59
All Cameras Control
All cameras connected to the unit can be controlled at a
time.
•All home positions: All cameras will be moved to the
home positions.
•All auxiliaries OFF: AUX 1 and 2 outputs of cameras will
become OFF.
Note:This operation is not available for cameras restricted
by the operators setting.
WV-CU950/650
1. Press the MENU button repeatedly until All CAM
Control appears on the LCD.
2. Press the F1 or F3 button. 
Available buttons and functions
F1:All home positions
F3:All Auxiliaries...

60
The following is the procedure examples for recorder con-
trol. Refer to p. 73 Lists of Operations and Functions for
other recorder control procedures not described here. The
following procedures are available when a camera is
selected.
Note:Depending on statuses, recorder control may not be
performed properly. In this case, check the recorder
status, and retry the control.
 Playback
In the following example, you will play back the recorded
image of Camera 3.
1. Check that Camera 3 has been...