Panasonic LCD Projector Pt Rz570 Operating Instructions

Chapter 4 Settings — [POSITION] menu
ENGLISH - 71
Setting [KEYSTONE] or [CURVED CORRECTION]
1) Press as to select [SCREEN ADJUSTMENT].
2)  
Press 
 qw to select [KEYSTONE] or [CURVED CORRECTION].
3)
 
Press the  button.
 fThe 

[KEYSTONE] or [CURVED CORRECTION] screen is displayed.
4)
 
Press 
 as to select the item to adjust.
5)
 
Press 
 qw to adjust.
[KEYSTONE]
[LENS THROW RATIO]
Set the throw ratio. 
Select the value close to the actual projection distance divided by projected image width here....

Chapter 4 Settings — [POSITION] menu
72 - ENGLISH
Setting [CORNER CORRECTION]
1) Press as to select [SCREEN ADJUSTMENT].
2)  
Press 
 qw to select [CORNER CORRECTION].
3)
 
Press the  button.
 fThe 

[CORNER CORRECTION] screen is displayed.
4)
 
Press 
 as to select the item to adjust, and press the  button.
5)
 
Press 
 asqw to adjust.
[CORNER CORRECTION]
[UPPER LEFT]
[UPPER RIGHT][LOWER LEFT][LOWER RIGHT]
[LINEARITY]
Horizontal direction
Vertical direction
Note
 f The picture quality will degrade more...

Chapter 4 Settings — [ADVANCED MENU] menu
ENGLISH - 73
[ADVANCED MENU] menu
On the menu screen, select [ADVANCED MENU] from the main menu, and select an item from the sub-
menu.
Refer to “Navigating through the menu” (x
  page   57) for the operation of the menu screen.
[DIGITAL CINEMA REALITY]
You can increase the vertical resolution and enhance the picture quality by performing cinema processing when 
the PAL (or SECAM) 576i signal, the NTSC 480i signal, and 1080/50i, 1080/60i are input.
1)
 
Press...

Chapter 4 Settings — [ADVANCED MENU] menu
74 - ENGLISH
Blanking correction Item OperationAdjustmentRange of adjustment
Left side of the  screen [LEFT]Press w.
The blanking zone 
moves to the right.
Left and right 0 - 959
Press q.
The blanking zone 
moves to the left.
Right side of the  screen [RIGHT]Press q.
The blanking zone 
moves to the right.
Press w.The blanking zone 
moves to the left.
[INPUT RESOLUTION]
You can adjust the image to achieve an optimal image when there is a flickering image or...

Chapter 4 Settings — [ADVANCED MENU] menu
ENGLISH - 75
[ON]Use the setting value preset in the projector for the inclination of the edge blending area.
[USER] Use the user-setting value for the inclination of the edge blending area. (Configuration/registration 
requires separate software. Consult your dealer.)
 f
Proceed to Step  3) when anything other than [OFF] is selected.
3)
 
Press the  button.
 f The 

[EDGE BLENDING] screen is displayed.
4)
 
Press 
 as to specify the location to be corrected....

Chapter 4 Settings — [ADVANCED MENU] menu
76 - ENGLISH
18) Press qw to adjust the tilt of the border between [NON-OVERLAPPED BLACK LEVEL] a\
nd [BLACK 
BORDER LEVEL].
19)
 
Press 
 as to select [BLACK BORDER LEVEL].
20)
 
Press the  button.
 fThe 

[BLACK BORDER LEVEL] screen is displayed.
 f[RED], [GREEN], and [BLUE] can be adjusted individually if [INTERLOCKED] is set to [OFF].
21)

 
Press 
 as to select an item, and press qw to adjust the setting.
 fOnce the adjustment is completed, press the  button...

Chapter 4 Settings — [ADVANCED MENU] menu
ENGLISH - 77
 f[FRAME RESPONSE] cannot be set while in the P  IN P mode.
[RASTER POSITION]
This will allow the position of the image to move within the display area arbitrarily when the input image is not 
using the whole display area.
1)
 
Press 
 as to select [RASTER POSITION].
2)
 
Press the  button.
 fThe 

[RASTER POSITION]  screen is displayed.
3)
 
Press 
 asqw to adjust the position.   

Chapter 4 Settings — [DISPLAY LANGUAGE] menu
78 - ENGLISH
[DISPLAY LANGUAGE] menu
On the menu screen, select [DISPLAY LANGUAGE] from the main menu, and display the sub-menu.
Refer to “Navigating through the menu” (x
  page   57) for the operation of the menu screen.
Changing the display language
You can select the language of the on-screen display.
1)
 
Press 
 asqw to select the display language and press the  button.
DISPLAY LANGUAGE
SELECT
SET
ENTER
 fVarious menus, settings, adjustment screens,...

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 79
[DISPLAY OPTION] menu
On the menu screen, select [DISPLAY OPTION] from the main menu, and select an item from the sub-
menu.
Refer to “Navigating through the menu” (x
  page   57) for the operation of the menu screen.
[COLOR MATCHING]
Correct the color difference between projectors when using multiple projectors simultaneously.
Adjusting the color matching as desired
1) Press as to select [COLOR MATCHING].
2)  
Press 
 qw to switch the item.
 fThe...

Chapter 4 Settings — [DISPLAY OPTION] menu
80 - ENGLISH
3) Press the  button.
 fThe 

[MEASURED MODE] screen is displayed.
4)
 
Press 
 as to select [MEASURED DATA].
5)
 
Press the  button.
 fThe 

[MEASURED DATA] screen is displayed.
6)
 
Measure the current luminance (Y) and the chromaticity coordinates (x, y) using the colorimeter .
7)

 
Press 
 as to select a color, and press qw to adjust the setting.
 fSet [AUT

O TESTPATTERN] to [ON] to display a test pattern of selected colors.
8)
 
Once all the...