Panasonic LCD Projector Pt Rz570 Operating Instructions

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 101
 fWhen the variation in brightness has increased due to aging of the light source, or when you replaced the light source, readjust the 
brightness control.
 fWhen the projector is used continuously for more than 24 hours, set [CALIBRA TION 

TIME]. If it is not set, correction will not be performed 
automatically.
 f The brightness control function and the dynamic contrast function will operate simultaneously , but the dynamic contrast function...

Chapter 4 Settings — [PROJECTOR SETUP] menu
102 - ENGLISH
The screen shows the status of the brightness control of synchronized projectors (up to eight units), including the 
projector being controlled through the on-screen menu.
2 1
3
4
5 
7
8
1:
2:
3:
4:
5:
6:
7:192. 168. 30.   2
192. 168. 30.   3
192. 168. 30.   4
LINK
UPDATE PROJECTOR
GROUP A
PROJECTOR2
PROJECTOR3
BRIGHTNESS CONTROL STATUS
MENU SELECT
When [CONSTANT MODE] is set to [PC]
5
1
6
RETURN
CONSTANT MODE
PROJECTOR PC
BRIGHTNESS CONTROL...

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 103
Note
 fIf the synchronized projectors are not displayed in the list, check the following: gAre there devices with the same IP
 address on the network?
 gAre LAN cables connected correctly? ( x

  page   127)
 gAre the subnets of the projectors the same? gAre the same [LINK] settings applied to a group? fRefer to [NETWORK SETUP] ( x

  page   123) or “[Network config] page” (x
  page   137) on how to change the projector name.
Brightness control...

Chapter 4 Settings — [PROJECTOR SETUP] menu
104 - ENGLISH
Note
 fThe [STANDBY MODE] setting will be forced to [NORMAL] when the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [STANDBY 
MODE] is set to [ECO], and [SCHEDULE] is set to [ON]. Changing the setting to [ECO] is not available.  The [STANDBY MODE] setting will 
not change back even when [SCHEDULE] is set to [OFF] in this condition.
How to assign a program
1) Press  as to select [SCHEDULE].
2)  
Press 
 qw to select [ON], and press the  button.
 fThe...

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 105
[COMMAND]Detailed settings of 
[COMMAND] Description
[INPUT] [COMPUTER1]
Switches the input to COMPUTER1.
[COMPUTER2]
*1Switches the input to COMPUTER2.
[VIDEO] Switches the input to VIDEO.
[DVI-D] Switches the input to DVI
- D.
[HDMI1] Switches the input to HDMI1.
[HDMI2] Switches the input to HDMI2.
[DIGITAL LINK] Switches the input to DIGITAL LINK.
[INPUT1] - [INPUT10]
*2Switches the input to DIGITAL LINK, and switches the input of the...

Chapter 4 Settings — [PROJECTOR SETUP] menu
106 - ENGLISH
3) Press asqw to select the input, and press the  button.
[LAST USED] Keeps the input selected last.
[COMPUTER1] Sets the input to COMPUTER1.
[COMPUTER2] Sets the input to COMPUTER2.
[VIDEO] Sets the input to VIDEO.
[DVI-D] Sets the input to DVI
- D.
[HDMI1] Sets the input to HDMI1.
[HDMI2] Sets the input to HDMI2.
[DIGITAL LINK] Sets the input to DIGITAL LINK.
[INPUT1] - [INPUT10]
*1Sets the input to DIGITAL LINK, and switches the input of the...

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 107
2) Press the  button.
 fThe 

[FUNCTION BUTTON] screen is displayed.
3)
 
Press 
 as to select a function.
[DISABLE] Disables the  button.
[SUB MEMORY] Displays the sub memory list. ( x
  page   117)
[SYSTEM SELECTOR] Switches the [SYSTEM SELECTOR] setting. (x
  page   66)
[DAYLIGHT VIEW] Switches the [DAYLIGHT VIEW] setting. ( x
  page   65)
[WAVEFORM MONITOR] Displays the waveform of the input signal. ( x
  page   93)
4) Press the  button....

Chapter 4 Settings — [PROJECTOR SETUP] menu
108 - ENGLISH
Note
 fAudio is not output in the standby mode when the [PROJECT OR SETUP] menu → [ECO MANAGEMENT] → [STANDBY MODE] is set to 
[ECO].
Setting audio output while using the shutter function
1) Press  as to select [AUDIO SETTING].
2)  
Press the  button.
 fThe 

[AUDIO SETTING]  screen is displayed.
3)
 
Press 
 as to select [IN SHUTTER].
4)
 
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[OFF] Audio is not...

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 109
2) Press the  button.
 fThe 

[STATUS] screen is displayed.
3)
 
Press 
 qw to switch the pages.
 fThe page will change each time you press the button.
[PROJECTOR TYPE] Displays the projector type and serial number of the projector.
[PROJECTOR RUNTIME] Displays the runtime of the projector.
[LIGHT RUNTIME] Displays the runtime of the light source.
[MAIN/SUB VERSION] Displays the main and sub versions of the firmware of the projector .
[INTAKE AIR...

Chapter 4 Settings — [PROJECTOR SETUP] menu
110 - ENGLISH
Setting the date and time manually
1) Press as to select [DATE AND TIME].
2)  
Press the  button.
 fThe 

[DATE AND TIME] screen is displayed.
3)
 
Press 
 as to select [ADJUST CLOCK].
4)
 
Press the  button.
 fThe 

[ADJUST CLOCK] screen is displayed.
5)
 
Press 
 as to select an item, and press qw to set the local date and time.
6)
 
Press 
 as to select [APPLY], and press the  button.
 fThe setting of the date and time will be completed....