Panasonic LCD Projector Pt Rz570 Operating Instructions

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 111
2) Press the  button.
 fThe 

[SECURITY PASSWORD] screen is displayed.
3)
 
Enter a security password and press the  button.
4)

 
When the confirmation screen is displayed, press  qw

 to select [OK], and press the  button.
Note
 f The projector enters the standby mode to reflect the setting values when [LOAD  ALL  USER DATA] is executed. fData registered from a computer is not included in [ALL
 USER DATA].
[INITIALIZE]
Return various setting...

Chapter 4 Settings — [P IN P] menu
112 - ENGLISH
[P IN P] menu
On the menu screen, select [P IN P] from the main menu, and select an item from the sub-menu.
Refer to “Navigating through the menu” (x
  page   57) for the operation of the menu screen.
Using P IN P function
Locate a separate, small sub screen in the main screen to project two images simultaneously .
1)  
Press 
 as to select [P IN P MODE].
2)
 
Press the  button.
 fThe 

[P IN P MODE] screen is displayed.
3)
 
Press 
 as to select a...

Chapter 4 Settings — [P IN P] menu
ENGLISH - 113
15) Press as to select [TYPE].
16)  
Press 
 qw to switch the item.
[MAIN WINDOW] The main window has display priority.
[SUB WINDOW] The sub window has display priority.
Note
 fThe P IN P function may not be available for some signals being input or terminals being selected. Refer to “Two-window display 
combination list” ( x
  page   166) for details.
 fThe main window setting values are applied as image adjustment values such as the [PICTURE] menu  →...

Chapter 4 Settings — [TEST PATTERN] menu
114 - ENGLISH
[TEST PATTERN] menu
On the menu screen, select [TEST PATTERN] from the main menu.
Refer to “Navigating through the menu” (x
  page   57) for the operation of the menu screen.
[TEST PATTERN]
Display the test pattern built-in to the projector.
Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input 
signal before performing various adjustments.
1)
 
Press 
 qw to switch the [TEST PATTERN]...

Chapter 4 Settings — [SIGNAL LIST] menu
ENGLISH - 115
[SIGNAL LIST] menu
On the menu screen, select [SIGNAL LIST] from the main menu.
Refer to “Navigating through the menu” (x
  page   57) for the operation of the menu screen.
 rRegistered signal details
A1 (1-2)
When the address number (A1, A2, ... L7, L8) signal is registered Sub memory number
Memory number:
 f
A name can be set for each sub memory (x   page   117).
Registering new signals
After a new signal is input and the  button on the remote...

Chapter 4 Settings — [SIGNAL LIST] menu
116 - ENGLISH
Note
 fA registered signal can also be deleted from [REGISTERED SIGNAL DELETE] on the [REGISTERED SIGNAL SETUP] screen.
Protecting the registered signal
1) Press  asqw to select the signal to protect.
2)  
Press the  button.
 fThe 

[REGISTERED SIGNAL STATUS] screen is displayed.
3)
 
Press the  button.
 fThe 

[REGISTERED SIGNAL SETUP] screen is displayed.
4)
 
Press 
 as to select [LOCK].
5)
 
Press 
 qw to switch the item.
 fThe items will switch...

Chapter 4 Settings — [SIGNAL LIST] menu
ENGLISH - 117
 fIn an environment where multiple types of signals are input to the same terminal, signals are sometimes not determined correctly when the 
setting is set to [WIDE].
Sub memory
The projector has a sub memory function that can register the multiple image adjustment data, even if it is 
recognized as the same signal by the frequency or format of the synchronization signal source.
Use this function when you need to switch the aspect or adjust the...

Chapter 4 Settings — [SECURITY] menu
118 - ENGLISH
[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an item from the sub-menu.
Refer to “Navigating through the menu” (x
  page   57) for the operation of the menu screen.
 fWhen the projector is used for the first time
Initial password: Press  awsqawsq in order

, and press the  button.
Attention
 f When you select the [SECURITY] menu and press the  button, entering a password is prompted. Enter the preset password and...

Chapter 4 Settings — [SECURITY] menu
ENGLISH - 119
2) Press qw to switch the item.
 fThe items will switch each time you press the button.
[OFF] Hides the security message.
[TEXT] Displays the text set in the [SECURITY] menu → [TEXT CHANGE].
[USER LOGO] Displays the image registered by the user.
Note
 fTo create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.
[TEXT CHANGE]
Edit the text to be displayed when [TEXT] is selected in [DISPLA Y SETTING].
1)  
Press...

Chapter 4 Settings — [SECURITY] menu
120 - ENGLISH
4) Press the  button.
 fThe 

[CONTROL PANEL] screen or the [REMOTE CONTROL] screen is displayed.
5)
 
Press 
 as to select [CONTROL PANEL] or [REMOTE CONTROL].
6)
 
Press 
 qw to switch [USER].
7)
 
Press 
 as to select the button item to set.
 fWhen [INPUT

 SELECT BUTTON] is selected in [REMOTE CONTROL], press the  button, and 
then press as to select the button to set.
Buttons that can be set
[CONTROL PANEL] [REMOTE CONTROL]
[POWER BUTTON] Power...