Panasonic LCD Projector Pt Rz570 Operating Instructions

Chapter 7 Appendix — Technical information
ENGLISH - 161
Command transmission method
Transmit using the following command formats.
 r Transmitted data
Header Data sectionTermination 
symbol
Command  example Hash value
“Connecting” ( x
 
page
 
160) ‘0’
0x30 ‘0’
0x30 Control command
(ASCII string) (CR)
0x0d
Data length 32
 
bytes 1
  byte 1   byteUndefined length 1
  byte
 fExample: Transmission of power supply status acquisition command (hash value is calculated from default user 
name, password, and...

Chapter 7 Appendix — Technical information
162 - ENGLISH
Command transmission method
Transmit using the following command formats.
 r Transmitted data
Header Data sectionTermination 
symbol
Command  example ‘0’
0x30 ‘0’
0x30 Control command
(ASCII string) (CR)
0x0d
Data length 1
 
byte 1
  byte Undefined length 1
  byte
 fExample: Transmission of power supply status acquisition command
“00QPW” (CR)
 r Received data
Header Data sectionTermination 
symbol
Command  example ‘0’
0x30 ‘0’
0x30 Control command...

Chapter 7 Appendix — Technical information
ENGLISH - 163
 terminal
The  terminal of the projector conforms with RS-232C so that the projector can be connected to and 
controlled from a computer .
Connection
When connecting directly
Projector connecting terminals
Computer
D-Sub 9p (male) Communication cable (straight)
D-Sub 9p (female)
When connecting using DIGITAL LINK compatible device
DIGITAL LINK compatible device
Computer
D-Sub 9p (female)
Projector connecting terminals
DIGITAL LINK DIGITAL LINK...

Chapter 7 Appendix — Technical information
164 - ENGLISH
Basic format
Transmission from the computer starts with STX, then the ID, command, parameter, and ETX are sent in this 
order. Add parameters according to the details of control.
(2 bytes)2 ID characters (2 bytes) Semi-colon (1 byte) Colon (1 byte)
3 command characters (3 bytes) Parameter (undefined length)
Start (1 byte) ZZ, 01 to 64
ID designate
End (1 byte)
Basic format (has subcommands)
Parameter (6 bytes)*1
Symbol “+” or “–” (1 byte) and...

Chapter 7 Appendix — Technical information
ENGLISH - 165
Cable specification
1NC    NC 1
2 2
3 3
4 NC    NC 4
5 5
6 NC    NC 6
7 7
8 8
9 NC    NC 9
When connected to a computer
Projector
( terminal) Computer
(DTE specifications)
Control command
The following table lists the commands that can be used to control the projector using a computer
.
 rProjector control command
Command Details Parameter/response 
string Remark (parameter)
PON Power on
―To check if the power is on, use the “Power query” command....

Chapter 7 Appendix — Technical information
166 - ENGLISH
Two-window display combination list
l: P IN P (picture in picture) combination is possible
―: P IN P (picture in picture) combination is not possible
Sub window
Main window
COMPUTER1 COMPUTER2DVI-D VIDEO HDMI1 HDMI2 DIGIT AL 
LINK
COMPUTER1 input Still image signal
―l―
l
*1― l l
Moving image signal
Y/C signal
COMPUTER2 input Still image signal
l―
l l l ― ―
Moving image signal
DVI
-
D input Still image signal
―l―
l―
l l
Moving image signal
VIDEO...

Chapter 7 Appendix — Technical information
ENGLISH - 167
List of compatible signals
The following table specifies the video signals compatible with the projector.
 fSymbols that indicate formats are as follows.
 gV

: VIDEO, Y/C
 gR: RGB
 gY

: YC
BCR/YPBPR
 gD: DVI - D
 gH: HDMI
 fInput corresponding to each item in the plug and play column is as follo\
ws.
 gCOMPUTER: COMPUTER1/COMPUTER2 input
 gDVI

- D: DVI - D input
 gHDMI/DL: HDMI1/HDMI2 input, DIGIT

AL LINK input
Compatible signalResolution...

Chapter 7 Appendix — Technical information
168 - ENGLISH
Compatible signalResolution
(Dots) Scanning freq.
Dot clock 
freq.
(MHz) Format Plug and play
*1
Horizontal
(kHz)Vertical(Hz)COMPUTERDVI-D HDMI/
DL
EDID1 EDID2 EDID3
1
152
 
x
 
864/60 1
 
152
 
x
 
864 53.7  60.0  81.6  R/D/H ― ― ― ― ―
1152
 
x
 
864/70 1
 
152
 
x
 
864 64.0  70.0  94.2  R/D/H ― ― ― ― ―
1152
 
x
 
864/75 1
 
152
 
x
 
864 67.5  75.0  108.0  R/D/H ― ― ― ― ―
1152
 
x
 
864/85 1
 
152
 
x
 
864 77.1  85.0  119.7  R/D/H ― ― ― ― ―...

Chapter 7 Appendix — Technical information
ENGLISH - 169
 g1   920   x   1   200 fThe “i” at the end of the resolution indicates an interlaced signal. fWhen interlaced signals are connected, flickering may occur on the projected image. fDIGIT

AL LINK input compatible signal is the same as HDMI input compatible signal.  

Chapter 7 Appendix — Specifications
170 - ENGLISH
Specifications
The specifications of the projector are as follows.
Power supplyPT
-
 RZ570B, PT
-
 RZ570W, 
PT- RZ570BD, PT- RZ570WD, 
PT- RZ570BA, PT- RZ570WA100
  V - 240   V ~ (100   V - 240   V alternating current), 50   Hz/60   Hz
PT
-
 RZ570BT, PT
-
 RZ570WT110
  V ~ (110   V alternating current), 60   Hz
Power consumption PT
-

RZ570B, PT
-
 RZ570W, 
PT
-

RZ570BD, PT
-
 RZ570WD, 
PT
-

RZ570BA, PT
-
 RZ570WA500
  W (5.9  
A
  - 2.3  
A)
PT
-...